Browse
···
Log in / Register

Mechanic 1st, 2nd, 3rd shifts (Newington, CT)

$21-24/hour

244 Hartford Ave, Newington, CT 06111, USA

Favourites
Share
Description

Trade school students, graduates, technicians, and mechanics are strongly encouraged to apply! Work Schedule: Actively hiring for 1st, 2nd, and 3rd schedules: •1st shift (Monday - Friday 7:30 am - 3:30 pm) •2nd shift (Monday - Friday 3:30 pm - 11:30 pm) •3rd shift (Sunday - Thursday 11:30pm - 7:30am) SUMMARY This position is responsible for machine setups, troubleshooting and preventive maintenance of all production equipment, as well as provide continuous improvement to the preventive maintenance process. Mechanic will have primary home department (Bindery or Insert). ESSENTIAL DUTIES AND RESPONSIBILITIES • Maintain safe work environment and follow all company safety protocols. • Perform Simple setups on machines in a timely manner. •Bindery: focus Spedo and H&H lines. Setups for 1 up, 2 up, wrap, interstack and slit/nest work. •Inserting: focus on WD and Epic lines. Setups for 4x8, #10, 6x9 – including friction/rotary feeders, double detection, thin and thick work, card attached labels, IMB camera, loading templates/modes •Read job recaps thoroughly and check jobs as to accuracy, reporting any error or discrepancy to the supervisor immediately •Clean machines prior to setups and inspect the machines as a preventive maintenance measure. •Maintain production standards. Report any production, quality or safety problems to the supervisor immediately. •Perform daily/weekly/monthly preventive maintenance on machines as necessary. Contribute to PM planning. •Perform minor electrical testing, such as, change fuses and fix broken wires. •Perform small parts replacement as needed: •Bindery: folder rollers, glue nozzles, feed rollers/belts, bearings, Spedo pin feeds •Inserting: feed rolls/belts, glue/water nozzles, minor transport repairs •Respond to machine problems throughout the shift. •Diagnose problems and perform minor repairs and adjustments as quickly as possible to avoid production delays. •Utilize MicroMain system for all repairs/parts. Follow all crib procedures, find parts (look up in system and locate), complete all paperwork etc. to ensure accurate parts inventory. •Move to other areas or perform other duties as directed by supervision. •Comply with company rules and regulations. •Maintain confidentiality of company-sensitive data. •Implement a commitment to quality philosophy and recommend methods and procedures to reduce cost and/or improve operating efficiency of the department. •Keep manager/supervisor informed of activities and situations that will affect the achievement of corporate or department goals and objectives. •Perform other related duties as required to achieve the goals and objectives of the department and company. WE ARE ACTIVELY SEEKING CANDIDATES WHO: • Can reliably commute to our Newington, CT facility Are available to work: •1st shift (Monday - Friday 7:30 am - 3:30 pm) •2nd shift (Monday - Friday 3:30 pm - 11:30 pm) •3rd shift (Sunday - Thursday 11:30pm - 7:30am) •Want to build a career with a stable family-owned company EDUCATION/EXPERIENCE •Trade school plus 1-2 years experience in machine repair or equivalent. COMPETENCIES •Ability to use basic hand and power tools, such as: •Standard and metric wrenches and sockets •Screwdrivers •Electric meters and testers •Saws •Drills •Electric sander/grinder •Machine shop tools •Experienced with standard and advanced tools •Computer literacy •Ability to comprehend parts/operator manuals. •Good Communication skills, verbal and written •Required technical expertise that can: •Read schematics and prints •Effectively read, follow, and comprehend technical manuals •Run and adjust machines

Source:  craigslist View original post
Location
244 Hartford Ave, Newington, CT 06111, USA
Show map
craigslist

You may also like

Craigslist
Production Coordinator (Chandler)
Job Purpose Assist the Production department in maintaining quality standards and efficient production. Key Responsibilities ● Manage and update monthly production schedules, adjusting as needed to meet deadlines and production goals. ● Support team leaders and the Production Supervisor in maintaining high product quality. ● Communicate scheduling updates and changes to the Production Supervisor, team leaders, and other relevant departments. ● Accurately complete required documentation and assist with lot numbering processes. ● Maintain a clean, organized, and safe work area, and help team members with general production tasks. ● Verify material status in Deacom and request material releases ● Partner with Quality Department to print batch records timely to align with production schedule ● Participate in weekly production meetings with NJ Team ● Track production supplies inventory and replenish as necessary ● Partner with Sanitation Department to assure cleaning room supplies are fully stocked ● Work with Shipping Department to track finished goods inventory and send to NJ ● Show a willingness to learn, take on new responsibilities, and grow within the role. ● Complete all required training activities in a timely manner. ● Maintain regular, on-site attendance, act reliably, and follow through on assigned tasks ● Other duties/projects as assigned, including tasks outside the scope of the primary responsibilities as needed, based on the needs of the organization. Schedule: Monday to Thursday 5:00 am to 3:30 pm Clean Background and Drug test Applications hours are 8:00 am to 1:00 pm Monday to Friday Ameritemps-Az 1309 W. Guadalupe Rd Suite#3 Mesa, Az 85202
4515 W Tyson St, Chandler, AZ 85226, USA
$26-28/hour
Craigslist
HAAS Mill Shop Manager GREAT PAY! (By the PHX airport)
HAAS ONLY CNC Mill shop seeking floor/ setup Manager Must set up, inspect, adjust, and approve parts for production. lead 2-6 employees on the floor. $66,000 per year base plus Steady OVERTIME + Healthcare split + Air condition shop PLS REPLY WITH RESUME
2504 E Corona Ave, Phoenix, AZ 85040, USA
$33/hour
Craigslist
$70-130K MECHANIC/ TECH WANTED, STEADY PAYCHECK (Everett, Renton)
100% JOB TRAINING PROVIDED, no aerospace experience required. Hiring those with 1+ year experience with anything mechanical, auto repair, construction(plumbing, electrical, HVAC, roofing, carpentry, heavy equipment etc.), machinist, audio, electronics, RC cars, home remodel, PC building, composite, boat repair, or any similar blue collar work or hobbies ***Include details in your resume*** ***** To apply: Copy/Paste the text of your resume into the text body of your email reply(not accepting email attachments at this time). IMPORTANT—Resumes must include name and email address***** ***** Someone will review your resume, you will be matched to job openings based on your resume qualifications ***** Benefits include: -Near endless supply of over time (Time & 1/2 over 8 weekday hours and all day Sat. All of Sunday is double time, holidays pay triple time) -Paid College -In house mentorship -Free shares of stock once training is complete. -10% 401 K Match -Paid motorcycle or CDL endorsement training -Paid flight training -Industry leading Health Care/Insurance/Dental/Vision -Paid sick leave and vacation -Yearly bonuses -COLA (cost of living) increases -Discounts on wireless plans, airport parking, electronics etc. Must have one or more of the following experience to be considered: Preferred Qualifications (***Include any of the following on resume if applicable***): --1+ years of experience with assembly work --1+ years of experience in manufacturing --1+ years of experience in aerospace, automotive, robotics or similar industry; this can include education and military. --1+ years of experience with safety process and/or procedures in a manufacturing or operations environment --Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program Basic Qualifications (***Include any of the following on resume if applicable***): --1+ years of experience with various types of hand held power tools --1+ years experience following oral and written instructions, work orders, engineering blue prints/drawings. --High School Diploma and/or General Education Diploma (GED) --Must be a US Person, lawful permanent resident, refugee, or asylee (Candidate must meet Export Control compliance requirements, as defined by 22 C.F.R. § 120.15)? --Must be able to pass an initial standard drug test ***** To apply: Copy/Paste the text of your resume into the text body of your email reply(not accepting email attachments at this time). IMPORTANT—Resumes must include name and email address***** ***** Someone will review your resume, Boeing will send you matching job openings based on your resume qualifications ***** Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law. Principals only. Recruiters, please don't contact this job poster. do NOT contact us with unsolicited services or offers
10630 Hwy 99, Everett, WA 98204, USA
$70,000-130,000/year
Craigslist
CNC Machine Operator (Three Rivers, MA)
EXPERIENCED CNC Machine Operator for Halpern Titanium's 15-person CNC machine shop in Palmer. Any candidate must have 2-3 years experience as a CNC operator. Must have good measuring skills, the ability to set-up new jobs and read prints. Experience milling titanium and composites is a plus. Halpern manufacturers folding knives for Three Rivers Mfg., so an interest in high-quality pocket knives is desirable. Check out TRMknives.com and halperntitanium.com for more details regarding Halpern and TRM. Starting pay is $19.00/hr. Higher starting pay commensurate with demonstrated skills. Any employee needs to be able to pass a drug test and have reliable transportation. The position is full-time 7:00 am - 3:30 pm Monday through Friday. Overtime may be available after 90 days. Halpern Titanium has a generous benefit package including a 3% matched IRA, 100% company paid individual health insurance, disability insurance, paid holidays, sick time and accrued vacation days. Starting pay is at least $19.00/hr. Higher starting pay commensurate with skills.
5 Springfield St, Palmer, MA 01080, USA
$19/hour
Craigslist
WELDING – CAREER OPPORTUNITIES (Caldwell)
Gayle Manufacturing Company (GMC) is a structural steel manufacturing company recruiting employees for our new, large facility in Caldwell, ID, as well as for our plant in Nampa, ID. GMC currently has open positions for welders offering excellent career opportunities for responsible and motivated individuals. Qualifications / Requirements: • Experience in Flux Core or MIG welding. • Ability to train in all aspects of welding and heavy structural steel fabrication, primarily using Flux Core processes in welding operations. • GMC provides extensive employee training, so enthusiasm, energy, and the desire to build a career are most important and result in opportunities and advancement. • 10-hour shifts (Monday-Friday) with some 8-hour Saturday shifts are common, and a shift incentive is paid to selected employees working GMC's 2nd shift. Compensation / Benefits: • GMC's pending benefits package includes employer-paid health insurance premiums, as well as employer-funded retirement plans, Paid Time Off, and paid vacations. • Current welder pay starts at $25/hr., increasing up to $26/hr. when transitioning to regular status at the 90-day employment milestone. • Employees are evaluated periodically and have the potential to significantly increase their responsibilities and pay. • The Initial Annual Compensation Package, including employer-paid health insurance premiums and normal overtime, ranges from $82,000 to $100,000, not including GMC's employer-funded retirement plans, Paid Time Off, and paid vacations. • Notably, there are ongoing opportunities for continuous growth and advancement at GMC. • Be part of a team responsible for manufacturing and constructing over 1,000 buildings, including complex commercial office buildings, skyscrapers, major hospitals, university buildings, airports, arenas, and more. Apply in person at the Gayle Manufacturing Company Administrative Office: 20409 Weitz Road, Caldwell; or submit your application via email to MelissaS@GMCx.com. Resumes alone will not be accepted. No phone inquiries. EOE. Applications are available at www.GayleMfg.com. To take a look at GMC's world-class facility in Caldwell, visit the following YouTube link: https://youtu.be/NzyzE7hc8Ek
20383 Weitz Rd, Caldwell, ID 83607, USA
$25/hour
Craigslist
Production and shipping worker (Deerfield)
We are an audio manufacturer based in Deerfield MA. We are looking for a part-time employee to help with production tasks including making sub-assemblies and preparing cabinets to packaging products. Soldering experience preferred but not required. Part-time, short term position with potential for longer term. Pay commensurate with experience $18-21/hr. Looking for someone with immediate availability.
25 Greenfield Rd, South Deerfield, MA 01373, USA
$18-21/hour
About Us
Terms of Use
Privacy Policy
Help
Contact Us
FAQ
Cookie
Cookie Policy
Cookie Settings
Our Apps
Download
Download on the
APP Store
Download
Get it on
Google Play
© 2025 Servanan International Pte. Ltd.