IT Field Technician I

You’ll be responsible for participating in the design process preparing thorough mechanical drawings and details. The work includes engineering design analysis for plumbing systems including water, waste and vent and HVAC systems including floor plans and schedules, and general research of new technologies as applicable. Requirements The successful candidate will: Learn the primary drafting tools, Revit and AutoCAD, as well as engineering analysis tools. Participate in development of mechanical designs from concept through completion of construction. Prepare engineering design calculations, create layouts, and write detailed engineering reports. Live out and uphold our values – Family, Service, and Trust. Live out and uphold our brand – Connections. Qualifications: Pursuing a Bachelor of Science Degree in Mechanical Engineering from an ABET accredited program; Sophomore, Junior or Senior level mechanical engineering student if seeking an internship. Minimum GPA of 3.0. Pay: $25/hr Benefits At Emanuelson-Podas, we're always looking for skilled, energetic, loyal talent that shares our company values and commitment to engineering excellence. We offer interns competitive wages and an on-site fitness studio and trainer (Minneapolis).

Structural Civil Engineer and Architect needed to draw up plan for a residential renovation. Two story home 1324 sqft. Need Plans to be drawn up to get a renovation permit approve by the city of LA. Project is in 90042 highland park area. Pay: Architect plan $3000 Structural Engineer to do all the calculation and stamp the architect plan $4000 Must have a valid P.E. (Professional Engineer) stamp or have access to one from an associate. Experience reviewing and stamping residential remodel plans for permit submission. Ability to work with architect’s plans and check them for structural integrity and code compliance. Ability to provide timely revisions if needed, so we can submit plans without delays. Have experience working in LA building codes.

You'll be responsible for participating in the design process preparing thorough electrical drawings and details. The work includes engineering design analysis for short circuit fault current, arc flash hazard, photometric anaylsis, voltage drop, load flow analysis, and general research of new technologies as applicable. Requirements The successful candidate will: Learn the primary drafting tools, Revit and AutoCAD, as well as engineering analysis tools such as SKM Power Tools for fault current studies and AGI for photometric analysis. Participate in development of electrical designs from concept through completion of construction. Prepare engineering design calculations, create layouts, and write detailed engineering reports. Live out and uphold our values - Family, Service, and Trust. Live out and uphold our brand - Connections. Qualifications: Pursuing a Bachelor of Science Degree in Electrical Engineering; Sophomore, Junior or Senior level electrical engineering student. Minimum GPA of 3.0. Must be authorized to work in the United States. Pay: $25/hr Benefits At Emanuelson-Podas, we're always looking for skilled, energetic, loyal talent that shares our company values and commitment to engineering excellence. We offer interns competitive wages and an on-site fitness studio and trainer (Minneapolis).

Summary: Seeking a skilled Project Manager (life cycle PM) to support the delivery of Capital Improvement Plan (CIP) through effective management of CIP and/or non-CIP projects. Responsible for managing projects throughout all phases of a project, including, but not limited to, business case development for project initiation, study, design, construction, procurement, operations turnover and project closeout. A life cycle PM may manage projects related to our water resource recovery facility (WRRF), our combined sewer overflow (CSO) facilities, our sewage pumping stations (SPS), or our regional wastewater collection system (RWCS). Job Responsibilities:  Communicate with and manage the project activities of all project stakeholders, all project disciplines, and regulatory agencies or authorities having jurisdiction. Manage the scope, schedule and budget for project delivery and report and coordinate same with the CIP Program Controls Team  Ability to communicate at all necessary levels of understanding, coordinate projects & details, and build & maintain relationships with operations and maintenance staff, procurement staff, asset management staff, engineering staff, leadership, and administrative staff.  Help develop with the project team realistic baseline forecasts of the overall project cost and schedule, as well as forecasts of each projects cost and schedule  Ensure adherence to the department’s engineering standards, project management standards, and guidelines, and actively participate in the improvement of same  Ensure the project team adheres to the CIP Program’s standard methodologies for project & quality management, projects controls, permitting and regulatory management, and project assurances as described in the Program Management Plan (PMP)  Coordinate all projects through public advertisement & procurement process  Manage the process for evaluating, tracking and mitigating project risks and communicating cost and/or schedule implications to leadership.  Manage the process for monitoring and enforcing contractor adherence PMP  Ensure the CIP Program’s Change Management procedures are adhered to  Monitor and manage project performance relative to planned baseline and approved changes  Collaborate with all stakeholders to develop project charters, including scope, schedule, and budget so that scope creep is avoided  Analyze variances and initiate mitigative actions needed to ensure timely completion of assigned projects  Track and communicate project cost control expectations and deliverables with consultants and contractors  Stay current with industry trends by participating in educational opportunities and professional/community organizations  Follow security and safety policies and procedures in carrying out work duties  Participate in strategic planning, including the annual CIP development process  Manage multiple projects and balance / allocate resources between projects  Prepare and present status reports to management as needed  Advise leadership team members of projects  Respond to requests for project information  Coordinate meetings and tasks with other business units across the organization  Provide mentoring in areas of expertise to other team members  Facilitate the project initiation, management, and closeout processes Required Education and Experience:  Transcripts or Diploma Required:  Education requirement can be substituted with extensive experience, at the discretion of the Chief Executive Officer or designee  Bachelor’s degree in Engineering, Construction, Business, or other related discipline of study from an accredited college or university; AND  Professional Engineer License in the State of Michigan OR Project Management Professional Certification from a recognized accredited body OR the ability to obtain one of these credentials within 12 months of joining; AND• Minimum of four (4) years of project management or related experience in the field and/or job assignment

You'll be responsible for participating in the design process preparing thorough electrical drawings and details. The work includes engineering design analysis for short circuit fault current, arc flash hazard, photometric anaylsis, voltage drop, load flow analysis, and general research of new technologies as applicable. Requirements The successful candidate will: Learn the primary drafting tools, Revit and AutoCAD, as well as engineering analysis tools such as SKM Power Tools for fault current studies and AGI for photometric analysis. Participate in development of electrical designs from concept through completion of construction. Prepare engineering design calculations, create layouts, and write detailed engineering reports. Live out and uphold our values - Family, Service, and Trust. Live out and uphold our brand - Connections. Qualifications: Pursuing a Bachelor of Science Degree in Electrical Engineering; Sophomore, Junior or Senior level electrical engineering student. Minimum GPA of 3.0. Must be authorized to work in the United States. Pay: $25/hr Benefits At Emanuelson-Podas, we're always looking for skilled, energetic, loyal talent that shares our company values and commitment to engineering excellence. We offer interns competitive wages and an on-site fitness studio and trainer (Minneapolis).

About the Job Job Title: Workshop Carpenter Location: Yonkers, New York Company: Make x Affect (Millwork Division of Affect Group) Type: Full-Time | In-person Hours: 40Hrs- M-F (with occasional overtime) Overview Make x Affect integrates skilled artistry with construction excellence, providing high-end, bespoke millwork and custom interior solutions. As the in-house millwork division of Affect Group, a NYC-based full-service general contractor and construction management firm operating in New York and the Tristate area, we support their fully integrated project delivery offering, enhancing project timelines, optimizing costs, and ensuring greater precision across projects. Our team is dedicated to transforming construction through positive spatial change. With a diverse portfolio spanning Corporate Interiors, Hospitality, Retail, Higher Education & Ground-up Residential projects, we pride ourselves on delivering excellence across every build. We are looking for 2 experienced full-time Workshop Carpenters to join our Make x Affect team at our Fabrication Facility located in Yonkers. This role will support projects from start to finish, ensuring consistency, quality, and care through all phases of prep, transport, and on-site installation. Key Responsibilities: Review and build from technical drawings and report back to the Director of Millwork with questions, comments, concerns. Manages, tracks, and plans tasks according to the production schedule. Execute fabrication tasks on schedule, maintaining high standards of quality and craftsmanship. Operate and maintain shop machinery, equipment, hand, and power tools safely and efficiently. Work with a range of materials including wood, sheet goods, metals, plastics, and hardware. Prepare and track tools, equipment, and materials for assigned projects. Collaborate in improvements on build methods and technical solutions. Accurately forecast and communicate task completion timelines. Support daily shop operations, including material prep, assembly, finishing, and staging. Maintain a clean, safe, and organized workspace. Track time and assignments accurately for project reporting. Assist with the upkeep of department tools, consumables, and equipment. Participate in post-project reviews, offering feedback and improvements for future builds. Promote and maintain a safe, respectful, and collaborative working environment Qualifications & Skills: Proven experience as a carpenter, fabricator, or related workshop role, ideally in in the commercial, hospitality, and/or residential fit out market. At least 3 years of experience in the manufacturing and/or installing of high quality, bespoke millwork products. Experience with all millwork manufacturing machinery – Panel Saw, Jointer, Planer, Widebelt Sander, etc. Strong knowledge of fabrication methods, materials, joinery techniques, and finishing. Ability to read and follow technical drawings, plans, blueprints, and sketches with accuracy. Competency with shop machinery, hand tools, and power tools. Excellent craftsmanship, attention to detail, and pride in quality work. Ability to manage time effectively, meet deadlines, and prioritize multiple tasks. Strong problem-solving and troubleshooting skills. Team-oriented with clear, professional communication skills. Reliability, punctuality, and a strong work ethic. Commitment to shop safety standards and proper practices. Ability to work on own initiative as well as part of a team. Familiarity with AWI (Architectural Woodwork Institute) standards, local building codes, and ADA compliance regulations. Physically able to lift up to 75 pounds and work on your feet for extended periods. Benefits: You will be eligible to participate in all applicable employee benefit plans and programs of the Company, including health, dental, and vision insurance, 401(k) (No Employer Contribution), and other offerings, subject to the terms and eligibility requirements of those plans. Plans are subject to change at the Company’s discretion To Apply: Send your resume and a short message to careers@affect-group.com with the subject line ‘Application – Workshop Carpenter [Your Name]’ or apply via Indeed. Equal Opportunity Statement Affect Build is an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, disability, veteran status, or any other legally protected status under local, state, or federal law. Job Type: Full-time Benefits: Paid time off Commuter benefits Ability to Commute: Yonkers, NY 10701 (Required) Work Location: In person