Bicycle Repair Person (Part or full time) (fremont / union city / newark)

Electrical Contractor needs skilled Electricians that have experience in new construction for long term employment. Multiple Locations in Central and North New Jersey You must have Transportation to work near your home Hand tools An ambition for this career path You must be able to Provide high quality work at a high production rate Install Romex and tie in all circuits Install Service feeders Run Cat-5 and Coax Install and tie in panels Install Service feeders Run Cat-5 and Coax Install and tie in panels Accurately measure Install lighting, receptacles and switches Steady, clean, dependable work near your home Top pay including Holiday, Vacation and Overtime Pay We Offer: Medical Insurance, Dental Insurance Vision Insurance Accidental Long-Term and Short-Term Disability Insurance Steady, clean, dependable work near your home Top pay including Holiday, Vacation and Overtime Pay Please respond with a resume outlining your experience.

We are looking for qualified cabinet installers for a hotel project in Algona. This is a temporary position. The work is basic and straightforward. It is production work as most units are the same, small galley kitchenettes. There are stone tops that need to be dropped on top of the cabinets with no cutting involved, Just drop and stick. The vanities come as knock down frames that mount to the wall with small cubby cabinets below. The vanity tops will likely need to be cut to length before installation. There are other items that need installing as well, like bath accessories, window sills, door frames and hardware. The more experience the better. Right now, the project is ready for cabinet installation. Please email your experience and availability.

Hammer & Hand is seeking experienced full-time Frame-to-Finish Carpenters, as well as Site Leads (lead carpenter and site supervisor), to join our Seattle team! Frame-to-Finish Carpenter Carpenter Qualifications • Approximately 5 years of custom carpentry experience including framing, envelope, and trim install • Experience with remodel and new build projects • Knowledgeable of materials, methods, and the tools involved in the construction of buildings and other structures • Must be able to keep accurate records and perform timekeeping, including electronic submittals • Must have reliable transportation, a valid driver’s license, and a clean driving record • Must have full selection of tools to perform the work • High level of accuracy and pride in your craft • Ability to lift 50lbs Site Lead Hammer & Hand is seeking a site lead to join its Seattle team. Successful candidates are goal-driven, organized, outside-the-box problem solvers with a keen attention to detail and the ability to manage a team and at least 10 years of experience. Site Lead Qualifications • Approximately 10 years of construction and carpentry experience • Approximately 5 years in an on-site project management role • Experience with high-end residential remodels and new build projects • Experience managing high-end commercial TI projects • Must have reliable transportation, a valid driver’s license, and a clean driving record • Must have full selection of tools to perform the work • High level of accuracy and pride in your craft • Ability to lift 50lbs • Self-motivated and able to motivate others • Well developed computer skills, including cloud based project management tools. Preferred Qualifications & Skills • Experience with cutting-edge building practices and high performance building. • Ability to use project management software. APPLY HERE: https://hammerandhand.com/careers/ No phone calls, please. Thank you for your interest! To apply, please submit an application through the link above, and we’ll be sure to reach out to you if we decide to move forward. -- About Hammer & Hand Established in 1995, Hammer & Hand is a general contractor celebrating 30 years in partnership with clients and architects in the Pacific Northwest. Our reputation is built on decades of dedication from individuals who are as passionate about their jobs as they are about their lives outside of work. Based in Portland and Seattle, our firm serves clients by empowering employees, harnessing 21st century building science, and advancing the tradition of craftsmanship. From classic remodels to design-forward commercial build-outs and high performance passive buildings, Hammer & Hand’s projects are crafted with care and built to last. We work hard to foster an atmosphere that supports our most valuable asset: our people. As such, we are proud to announce that we are on the path to 100% employee ownership. We offer a dynamic workplace, as well as a full range of benefits, including: • Competitive Industry Wages • 100% Employer Paid Medical and Dental Benefits • Optional Vision Plan • Alternative Health Care reimbursement program for chiropractic, massage, and acupuncture • 401k Retirement Savings Plan • Employee Stock Ownership Plan • Paid Time Off and Paid Holidays • Long-Term Disability Insurance • Profit Sharing • Employee Assistance Program We are always looking for the best talent to join our team and are aware that a great candidate for a job may come from a less traditional background. Studies have shown that women, LGBTQIA+ individuals, and people of color are less likely to apply for a job when they believe they may not meet all of the qualifications in a job description. We strongly encourage you to apply even if you’re not sure you meet every one of our qualifications. If you are unsure, you can contact us through our website with questions about how this would be determined. We do occasionally have openings for those looking to hone their craft and build their skillset. These are paid positions. Please do not hesitate to apply if you feel you have the aptitude to succeed with us! See more about our employment philosophy here: http://hammerandhand.com/about/employment/ Hammer & Hand is committed to equal opportunity in employment and does not discriminate based on race, color, creed, religion, sex, age, national origin, mental/physical disability, sexual orientation, gender identity/transgender status, military/veteran status, genetic information, or any other status/characteristic protected under applicable law.

GREAT COMPANY LOOKING FOR A GREAT PAINTER!! JAS Design Build seeks a Skilled Painter with exceptional attention to detail and the ability to work alone and as part of a team. JAS is a family-owned company with high retention rates and a positive, fun, hard-working culture. This position has the potential for growth and a generous compensation package: • a company vehicle and gas to and from job sites. • power tools and ladders. • spray booth. • OSHA 10 and Lead Renovator 10 training. • PTO (between 13 and 18 days per year), great health insurance (includes dental and vision), a partially matching 401k. • Profit sharing (twice yearly) and bonus holidays. Do you run your own painting business (or have done so in the past) and feel like a change may be in order? Are you a lead painter looking for a little more autonomy and to share your creativity and great eye for detail? Please consider applying for this position and joining our team! Required Skills: Minimum 10 years' experience in the following: Brushing, rolling and spraying of oil and water-based paints, stains and sealants. (thorough understanding of proper application techniques for various materials: primer, texture, paint, stain, and enamel). Prep work: Filling, caulking, and sanding of walls and trim (both interior and exterior), masking, safety and protection. Use of HVLP equipment Lead paint protocols and Hazardous materials (OSHA 10) Van organization and maintenance (including routine service work/oil changes with outside contractors) Other requirements: Excellent understanding of jobsite maintenance/management and clean-up, including proper waste disposal and tool and van maintenance. Prior use of spray booth Basic carpentry experience (or willingness to learn) Motivation and team skills: great communication via phone, text, email, and in-person (with coworkers, managers, and clients). Basic computer/cell phone skills, including some knowledge of zoom, Outlook and Excel Punctual and Reliable Clean driving record and WA state driver's license. Comfortable working at heights, including on ladders up to 40 feet. Estimating experience Additional Details: This is a full time (40 hrs.) position, and our hours are Monday - Friday 7.30 am – 4 pm We work in Seattle and nearby areas. $35 - $45.00 per hour, depending on experience. IF INTERESTED - resume and cover letter are required!

SUBCONTRACTOR/DOOR INSTALLER - $100k+ PER YEAR OPPORTUNITY We need subcontractors now! Our subcontractors typically average between $75k-$100k annually. We are the largest millwork installation company in the U.S. and have a proven track record of stability and year over year growth. Requirements: Must be able to pass a detailed background investigation. Minimum of 5 years' experience installing doors and/or trim carpentry is preferred. Commercial General Liability insurance (minimum $1M policy). Vehicle, trailer, or some way to transport products to job sites. Commercial Auto insurance policy (minimum $300K policy). EPA RRP Certified Firm and EPA RRP Certified Renovator (Lead Safe Work Practices Training). We can assist in obtaining certification if necessary. Access to a smart phone and/or tablet (a plus), as well as a computer with an internet connection. Contractor Licensing (State, County and City) required where applicable. Must provide own tools - IE: trim carpentry/door installation tools. Serious Inquiries only. Contractors are paid on a percentage basis, by job type. rfinstallations.my.site.com/s/job-position/a4xUw0000007hh8IAA/IVRCODE-0362

A busy local pre-owned car dealer with an average of 130 cars in inventory is currently looking to hire a reliable and skilled auto Mechanic/Technician to work at our dealership. We are dedicated to providing quality services for our vehicles and our customers’ vehicles. The technician must have experience, their own tools, and be able to work independently of others, perform car inspections, diagnostics, and repairs on imports and domestics. We buy and sell mostly but not limited to low miles used cars, trucks, and SUVs. We perform safety and mechanical inspections, minor and major diagnostics and repairs on our vehicles prior to offering them for sale. Potential candidates should have experience performing all types of diagnostics and repairs using advanced scanning machines and reprogramming newer vehicles. Our dealer/shop offers exceptionally great pay, raises, and a stress-free environment. If you have the experience/ability, tired of the stressful job you currently have, and want to live a better life while making lots of money, contact Joe immediately at 206-403-6463 or send resume to We offer: Vacation pay, Sick Leave, Uniforms Provided, Employment Bonus, Parts and labor discounts on own vehicle. Visit our website: www.allrightautosales.com