DAS Installation Technician

LOCATION AREA: Uptown Denver (Near Benedict Fountain Park) SCHEDULE: Monday-Friday 9:00 am - 6:00 pm | Availability for on-call emergencies SUMMARY: Under the direct supervision of General Manager, the Building Engineer will be responsible for delivering and maintaining all facilities of a residential high-rise building. The primary expectation for this role is to maintain and preserve the life of all common area equipment, both interior and exterior, while ensuring compliance with all City, County, State, OSHA, and governmental regulations. ROLE: · Manage the engineering and maintenance of a residential facility, including common areas, amenity spaces, and parking garage. · Conduct quarterly cost analyses for maintenance items, including filters, belts, valves, and parts. · Perform efficiency analysis and energy savings audits quarterly. · Create, execute, and maintain an automated preventative maintenance program for all building components. · Implement and maintain all required maintenance Standard Operating Procedures (SOPs) as directed by GM and VP of Risk Management. · Coordinate, maintain, and keep current all inspections for building components. · Supervise the maintenance team, contractors, and any other departments as assigned by the GM, ensuring excellence in job performance through training. · Build and maintain strong relationships with outside vendors. · Coordinate contracted services and repairs in conjunction with the GM. · Maintain complete and accurate records of all maintenance requests submitted, commented on, and completed. · Available for on-call emergencies after hours, weekends, and holidays as needed. · Ensure all safety precautions and procedures are followed while performing assigned duties. · Competent in addressing water-based/plumbing emergencies (Note: This role does not perform non-emergency plumbing repairs). · Willing and able to perform minor work including painting, cosmetic repairs, light fixture installations, damper actuators, etc. · Exhibit good communication skills with the team, management, and association owners to support the community. Requirements · Minimum of 3-5+ years of engineering or maintenance experience. · Intermediate knowledge of involved trades including electrical, plumbing, fire systems, elevators, and mechanical systems. · Ability to read and interpret building design drawings. · Knowledge of annual inspections. · Maintenance knowledge of: o HVAC water-based cooling and heating systems (Cooling towers, water source heat pumps, looped systems). o Domestic water and sump pumps. o Fire pump control and safety systems. o Trash rooms/compactors. · Experience with BuildingLink or comparable facilities/CRM software preferred. Benefits $1,000 USD bonus awarded upon completion of 6 months of employment Medical Dental Vision Short term disability (STD) Long term disability (LTD) Employee assistance program (EAP) Identity theft protection Pet insurance  Retirement Paid Time Off (PTO)

Adaptive Property Solutions provides building documentation services nationwide. We are seeking an individual to perform architectural as-built field verification services at commercial spaces in Sacramento, CA. In our process, we perform a 3DVR scan to generate a point cloud, which we use to create as-built drawings in Revit. We need a local field tech to provide interior confirming measurements and exterior elevation sketches. Architects, Engineers, Drafters, and individuals with experience in commercial construction are well-suited to perform these surveys. We are seeking to establish a long-term relationship to meet future demand in the area. If you are interested, please respond with your phone number, email address, and resume.

As a member of the Engineering Team at OnLogic, you will learn some of the rigors and unique design methodologies OnLogic uses to create the world’s most reliable Industrial PCs. You will work alongside Hardware and Design engineers in both lab and digital environments to create schematics, test and validate PCs, and interact with world class lab instrumentation and tools.  In this role, you’ll be responsible for:  Work with computer hardware, creating and modifying schematics and building PCB assemblies Build and test a wide variety of systems spanning the entire OnLogic portfolio and utilize a thorough root cause analysis process to tackle hardware and software issues Collaborate with the Hardware Electrical Engineering team to align on daily goals Participate in validation engineering tasks, ensuring reports are complete, and assisting with the development of new products Support design solutions for new and unique customer opportunities Own a technical project from conception to delivery, including research, design, and implementation, to enhance our product offerings.  The team you will be joining:  Our Engineering team creates our cutting edge industrial computers by finding innovative solutions on a daily basis. The Engineering team's success relies on collaboration, creative thinking and a commitment to being at the forefront of technology. Roles on our Engineering team include, Hardware, Mechanical, Applications and Regulatory. Requirements A junior or senior enrolled in a bachelor’s degree program or a recent college graduate An electrical engineering, computer engineering, or related major Demonstrated ability to learn new processes quickly and efficiently Demonstrated ability to thrive in a fast-paced work environment Available to work up to 40 hours per week during the semester Ability to work in the U.S. without visa sponsorship Satisfactory completion of a background check Who we're looking for: A task-oriented individual with excellent attention to detail Excellent written and verbal communication skills Self-motivated with the ability to solve problems creatively and strategically  Who we are: OnLogic is growing, and we want to give you the same opportunity to grow in your career! We design and manufacture specialized computers and hardware solutions for companies all over the world, helping them to make the seemingly impossible possible. Our computers are designed to work where others would fail, and it's our vision to be the first choice in industrial computing. To make that vision a reality, we've built a team of ambitious problem solvers, guided by the company's core values of Open, Fair, Innovative and Independent. We have an open office, open salaries and strive to be fair and transparent in our decision making. We encourage input and feedback from every member of our team and look to improve ourselves and our business every single day. OnLogic is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. To learn more about our values, our mission and what it's like to work at OnLogic, visit www.onlogic.com/careers. Benefits The pay for this co-op is $20/hour, with an up to 40 hour per week commitment during the semester.

DraftWorks Architecture is seeking a Licensed Architect (California) for ongoing freelance, project-based collaboration. About the Role: You’ll handle plan drafting, HOA submissions, and city permitting for residential projects such as garage-to-ADU conversions, remodels, and additions. Perfect for an independent architect seeking flexible, steady project work without full-time commitment. Responsibilities: Prepare and stamp plan sets for City of Sacramento and HOA approval Coordinate with homeowners, engineers, and city planning departments Respond to plan check comments and maintain project compliance Provide design input and revisions as needed Requirements: Active California Architectural License (required) Minimum 1 year of residential design and permit experience Skilled in AutoCAD or Revit Reliable communication and attention to deadlines Compensation: Per-project pay depending on scope (average $1,500–$3,500 per project) We average 10–20 projects per month, offering a consistent stream of work with flexible scheduling. Flexible schedule – remote or local collaboration Paid directly per approved project phase Travel reimbursement is provided for occasional site visits (measurements, inspections, or HOA review meetings) within the Bay Area or Sacramento region. About Us: DraftWorks Architecture is an independent Sacramento-based design firm specializing in ADUs, remodels, additions, and permitting. We focus on simplifying the design-to-permit process for homeowners while maintaining professional design quality.

Who We Are: At Goods Electric, Heating & Air, we don’t just fix problems—we create solutions that make homes bright, safe, and comfortable. We’re a passionate, hardworking team that thrives on delivering excellent customer service with integrity and innovative, customer-focused solutions. Job Overview (Duties/Responsibilities): Goods Electric, Heating & Air is seeking a HVAC Apprentice who aligns with our core values and commitment to excellence. In this role, you’ll train & shadow under an experienced top-notch HVAC Service Technician while assisting in delivering exceptional customer care, helping us create safe and reliable solutions for our customers. Requirements Skills/Qualifications: Proven experience as an HVAC Apprentice OR is a recent HVAC Trade-School graduate (with or without a license/certification, not required). High school diploma or equivalent required. An HVAC Trade School diploma/certificate is a plus! Valid driver's license with a clean driving record. Possess a willingness to learn technologies/software & tools used: Google Workspace, such as Google Sheets, Docs, Google Calendar, Gmail, as well as Microsoft Office, and Dropbox, or similar platforms. Excellent verbal and written communication skills. Strong organizational skills with a keen eye for detail. Ability to multitask and prioritize tasks effectively in a fast-paced environment. Customer-focused attitude with a commitment to upholding the company’s values. Benefits Why Choose Good’s Electric, Heating, and Air? Competitive weekly pay: $18-22/hour or more depending on experience! Bonus incentive based on field performance! Simple IRA retirement plan with 3% company match after the first year. Health Insurance Reimbursement Account. 5 days of PTO accrued per year with additional days added for each year of employment. 6 Paid Holidays (New Year’s Day, Memorial Day, Independence Day, Labor Day, Thanksgiving, Christmas). Company-provided uniforms (polos, pants, jackets) with laundry service. As a family-oriented company, we prioritize open communication and a strong team culture. NEXSTAR company - Our Employees have access to world-class training and coaching. Paid Training at our facilities. Supportive and collaborative work environment. Goods Electric, Heating, and Air is an Equal Opportunity Employer. 

BMA Mechanical+ is a company for problem solvers, innovators, and team players. We get excited about things like saving energy and water, designing with the latest and greatest, and helping our customers achieve their vision. Our mission is to develop, support, and shape the built environment with innovative, resilient, and sustainable solutions. We call it the California Standard. Job description:  As an HVAC & Plumbing Drafter/Specialist or Designer, your primary responsibility is to support the design and engineering teams by creating detailed and accurate drawings using relevant software and tools. Specializing in HVAC and plumbing engineering, you play a crucial role in translating conceptual designs into comprehensive, precise, and technically sound construction documents. Your role involves collaboration with architects, engineers, and other stakeholders to ensure that the HVAC and plumbing systems are efficiently integrated into the overall building design. This is a full-time in-office position. Role & Responsibilities: Ensure accuracy and compliance with industry standards and project specifications. Ensure Seamless Integration of HVAC and Plumbing Systems. Must be familiar with building codes, standards and regulations related to HVAC and plumbing systems. Ability to take on and complete tasks independently and/or with a team. Timely resolution of design-related issues through effective communication. Stay Technologically Current with awareness and application of the latest developments in relevant software tools. Team player. Qualifications: Proficiency in using AutoCAD is required. 3+ years working in Architecture/Engineering/Construction field is preferred Preferred Software skills: AutoCAD, Bluebeam, MS Office365 & REVIT A growth mindset is essential. What we offer: We encourage a healthy work/life balance and are dedicated to cultivating an excellent work atmosphere for our team. Our benefits package includes generous vacation time, paid holidays, medical, dental, vision benefits, Annual bonus, 401(k) retirement plan with matching contributions. We promote a healthy work/life balance.  For consideration, please provide a cover letter that includes information on why you are interested in this position as well as a detailed resume. Please apply online with BMA Mechanical+ at: https://bmamechanical.hiringthing.com/job/877820/plumbing-drafter-specialist-junior-plumbing-designer?s=cl