CNC Machinist II- 2nd Shift

Selective Plating in Addison is hiring! Now hiring Full time factory Line Operators. Career opportunity. >> No experience needed. We train. << * $18.00 per hour to start with no experience. * Fast advancement possible. * Higher starting wage with manufacturing or electroplating experience. * Overtime available. Benefits: • Paid Health Insurance • Paid vacation and holidays • Career Advancement opportunities APPLY IN PERSON ONLY. See Alexandra Ochoa at 240 S Lombard Rd, Addison, IL ( south of UPS on the same side of the street ) Monday - Friday: 8:30 am. - 4:00 pm.

Assist in all phases of part machining and water jet operations including: o   Review of part/component/system technical data for completeness and accuracy o   Identification of tooling, jig, and fixture requirements & support/input/review of engineering designs o   CNC file implementation o   Set-up o   Rough and finish machining Identify machine tool requirements Provide support to either Project Manager or mid-level/junior Engineering/Science personnel in the areas of scheduling, data gathering/limited analyses preparation of technical/project reports, test reports, drawings, specifications and associated documentation Assist with department administrative duties as necessary to learn about the work being performed, and to contribute to completion of department workload Other duties as assigned Requirements Education/Training: High School diploma or equivalent required Associate’s Degree in management or technical/scientific discipline preferred Experience: 0-2 years of professional experience in the required task area Security: Must be a US citizen Ability to obtain a security clearance may be required Physical Requirements Able to assess, install, and modify equipment, and inspect machinery Able to climb, balance, stoop, kneel, crouch, grasp and reach with hands and arms, handle and operate hand/power tools and machine controls Perform frequent wrist, hand, and finger movements Prolonged periods of standing while operating machinery Adhere to all safety protocols, including wearing appropriate safety gear (e.g., eyewear, gloves, masks, hearing protection, etc.) for the assigned task Able to safely lift and carry up to 50 pounds at a time Benefits Health Care Plan (Medical, Dental & Vision) Retirement Plan (401k, IRA) Life Insurance (Basic, Voluntary & AD&D) Paid Time Off (Vacation, Sick & Public Holidays) Short Term & Long Term Disability Training & Development Wellness Resources

Machine Operator With over 90 years of customer-focused performance, Our Client has evolved as a market leader in engineered rubber, plastic, metal, flexible environmental sealing, and energy management solutions. Summary Under minimum supervision, operates and follows instructions to operate the machines in a safe and efficient manner. Monitor the operations of the machines and notify the supervisor if there are any problems. Visually inspect parts produced and determine if they meet quality standards. Complete documentation on defective parts. Essential Duties • Operator molding and other production machines in a safe and efficient manner, notifying the lead or supervisor if there are any problems. Some troubleshooting skills are required. • Visually inspect parts and determine if they meet the acceptable quality limits. Conduct quality checks using measuring equipment. • Package parts as specified to ensure proper and safe handling of the product. • Log all rejects on the Attribute Charts. • Review the operator inspection procedure before taking over any job. • Label all boxes after packaging to ensure proper handling of parts. • Ability to use basic measuring Equipment. • Degate and trim parts as required using secondary machinery to accomplish. • Ability to perform secondary operations such as gluing, welding, trimming, and some assembly. • Ability to use part count scale. Required Education and Experience • High school diploma or GED equivalent. • Knowledge of various measuring equipment. • 6 months of consistent and recent work history Required Skills • Strong written/verbal communication • Good decision-making skills • Ability to work under time constraints with changing priorities. • Regular and predictable attendance. • Ability to sit and stand for long periods of time. • Basic math skills. • Ability to lift up to 50 pounds. • Ability to work overtime as needed. • Basic PC and internet skills. Shifts: Monday-Friday - Multiple Shifts: Day, Swing, Graveyard (call for current availability)  Pay: $17.00/hr. Apply online Or Call: 971.371.4028 Or Send your resume to portlandwest@pridestaff.com Or Simply come by our office from 1:00 pm to 3:30 pm. M-F 12600 SW Crescent Street STE 180, Beaverton, OR 97005 PrideStaff Portland is a locally owned and operated Staffing Agency. PrideStaff is a winner of the coveted “Best of Staffing” Diamond award for 16 consecutive years for the highest level of satisfaction as rated by our valued Employees and Clients. Allow us to support your job and career search and see the difference PrideStaff can make for you!

Expertise and Functions Provide support in the areas of scheduling, data gathering/limited analyses, database population, preparation of technical/project reports, test reports, and associated documentation Participate in test or project events as assigned by Project Manager or Engineering supervisor Assist with development of Contract Data Requirement List (CDRL)s per Statement of Work Assist with development of program Integrated Master Schedule (IMS) using Microsoft Project Develop Bill of Material (BOM) from Technical Data Package (TDP) Develop purchase requisitions based on program needs and funding Observe all safety rules and maintains a foreign object damage (FOD) free work area Work cross functionally in other areas as needed Identify priorities based on time constraints and resources available Use various hand tools and machinery as required Maintain a clean work area Work unsupervised at times Report status and results Other duties as assigned This position is contingent upon contract award. Requirements Education/Training: High School diploma or equivalent required Associate’s Degree in management or technical/scientific discipline preferred Experience: 0+ years of professional experience in the required task area required Security: Must be a US citizen Ability to obtain a security clearance may be required Physical Requirements Prolonged periods of standing and walking, able to bend, stretch, work with hands, push, pull, and move as needed to reach, clean, and service machinery Must be able to visually inspect machines Must be able to wear required safety equipment such as gloves, safety glasses, and respirator as needed Must be able to regularly lift and carry up to 25 pounds, and occasionally up to 50 pounds Benefits Health Care Plan (Medical, Dental & Vision) Retirement Plan (401k, IRA) Life Insurance (Basic, Voluntary & AD&D) Paid Time Off (Vacation, Sick & Public Holidays) Short Term & Long Term Disability Training & Development Wellness Resources

Welding and fabricating positions open. English or Spanish speaking. Need people that have experience MIG / TIG welding of aluminum and steel. Compensation offered based on knowledge and experience.Were working with aluminum and steel. You must be clean and organized person with positive attitude.

Expertise and Functions Provide support to either Program/Project Manager in the areas of project scheduling, data gathering/analyses, database manipulation or population, preparation of technical/project reports or briefings, test plans and reports, and associated documentation, test or validation/verification assistance Oversee/perform test or project events as assigned by Program Manager or Engineering supervisor, report status and results Follow engineering guidance, technical orders, and drawings Perform and oversee moderately complex assembly/test functions utilizing mechanical skills, hand and power tools, test equipment, and inspection measurement equipment in a manufacturing environment Perform and inspect wire terminations and wire harness assembly (OJT) Produce and inspect assemblies conforming to customer specifications (OJT) Assemble, test, and solder as required per customer/industry standards (OJT) Perform electrical checkout of manufactured wire harnesses (OJT) Document records identifying compliance with assigned tasks regarding wire harness manufacturing (OJT) Establish, organize & maintain detailed inventory of government, customer and KIHOMAC property (OJT) Lay out/assemble units for production according to designs, specifications, and work instructions (OJT) Modify equipment by adding, removing, or altering components as per predetermined processes (OJT) Maintain high ethical/professional standards of performance, demeanor, and judgment always Observe all safety rules and maintains a foreign object debris (FOD) free work area Train and assist other technicians on techniques and procedures Attend meetings and conferences to represent section Communicate with vendors to acquire quotes for hardware and materials (OJT) Perform hardware procurement through purchase requests (OJT) Report status and results Maintain a clean work area Work unsupervised at times Other duties as assigned This position is contingent upon contract award. Requirements Education/Training: High School diploma or equivalent required Associate’s Degree in management or technical/scientific discipline preferred IPC/WHMA-A-620 and IPC J-STD-001 Certification preferred Experience: 3+ years of professional experience in the required task area required U.S. military aircraft maintenance and wiring experience preferred Familiarity with schematics, logic drawings, layouts, wire lists, and prints preferred Ability to use various hand tools, soldering equipment, and machinery preferred Impeccable organizational skills and attention to detail a must Basic understanding of electrical circuits preferred Wire termination experience using DMC Tools - “Daniels Kit” - style tools preferred Knowledge of cable assembly procedures preferred Familiarity with USAF TO 1-1A-14 (AKA NAVAIR 01-1A-505-1 or TM 1-1500-323-21-1) preferred Basic knowledge of IPC/WHMA-A-620 and IPC J-STD-001 preferred Basic knowledge of IPC/WHMA-A-640 fiber optic cable harness preferred Security: Must be a US citizen Ability to obtain a security clearance may be required Physical Requirements Prolonged periods of standing and walking, able to bend, stretch, work with hands, push, pull, and move as needed to reach, clean, and service machinery Must be able to visually inspect machines Must be able to wear required safety equipment such as gloves, safety glasses, and respirator as needed Must be able to regularly lift and carry up to 25 pounds, and occasionally up to 50 pounds Benefits Health Care Plan (Medical, Dental & Vision) Retirement Plan (401k, IRA) Life Insurance (Basic, Voluntary & AD&D) Paid Time Off (Vacation, Sick & Public Holidays) Short Term & Long Term Disability Training & Development Wellness Resources