Browse
···
Log in

Electronics Systems Engineer

$65,000-80,000

7284 S Potomac St, Englewood, CO 80112, USA

Favourites
Share
Description

JOB SUMMARY We are a Denver-based low voltage company seeking an Electronics Systems Engineer for a full-time position. We are a small company (less than 10 people) that primarily performs detention security electronic system design, installation & maintenance for facilities in the Western US. Our projects are typically owner-direct and utilize our template systems and components for most projects. This is a “hands-on” engineering position where the candidate will assist with shop assembly and testing of the systems designed. Travel would be limited to day-trips to facilities in the front range (if required), and a typical workday will consist of working from home on designs or at our shop in Centennial assisting with assembly of systems previously designed. TASKS Provide design, value engineering, experience-based recommendations, code/standard review, document completeness, material tracking/expediting, system assembly, system testing, and installation support for projects in Jails and Prisons. Projects will encompass a variety of technology and systems, and will range in duration from a day to a few months, depending on the project size. Systems include CCTV, intercom, access control, PLC integration, SCADA/HMI, conduit install, wire pull and labeling, and possible light metal work. Individuals with limited experience in these areas but with the ability and willingness to learn new skills and accept new responsibilities are encouraged to apply. QUALIFICATIONS AND SKILLS - High School Diploma or General Educational Development certificate (GED) is required - Proficient in AutoCAD - Related training and certifications are a plus - Must be able to pass a background check and drug test in order to enter secured facilities in which the company performs work - Valid driver license and ability to meet the company's driving requirements - Physically able to lift heavy weights of up to 75 lbs - Able to stand and walk for an entire shift to meet the varying requirements of each day’s work - Knowledge of wiring practices/procedures/installation (including fiber optic) - Ability to interpret the intent of plans, schematics, specifications, wiring diagrams, and functional block diagrams for multiple systems, even those not explicitly included in a project’s scope - Able to learn new software/hardware platforms and techniques for support when needed. - Able to learn various techniques and technical procedures. - Self-directed and able to support projects independently or with a team - Background in a mechanical or electrical vocation in which hands-on technical expertise is required - Mechanical aptitude and experience utilizing metering devices - Expresses thoughts clearly and concisely (written and verbal) ESSENTIAL JOB FUNCTIONS - Constant and thorough communication with project management, programming, engineers, and electronics technicians - Verifies security system /equipment functionality by testing equipment, connections, and signals; identifying and correcting problems - Perform wiring and hardware troubleshooting utilizing a voltmeter and other low-voltage electrical tools and methods - Assist with shop assembly of components prior to onsite installation - Contribute to team effort by accomplishing related results as needed - Complete special projects upon requests, and other duties may be assigned - Constant and thorough communication with project management, programming, and fabrication - Perform all duties associated with designing and integrating every sub-system within the specified security systems - Compile all required submittal documentation for submission to the project architect, consultant, and owner - Oversee and complete detailed design drawings to effectively communicate the design to internal and external members of the project team - Support engineered designs through fabrication, factory testing, on-site installation, and commissioning - Oversee site start-up and testing of systems - Perform company-wide trainings on topics in which you have received formal training - Complete documents and forms for department process/procedure - Proactively discover and resolve internal and external conflicts in order to keep projects moving forward BENEFITS - Paid time off - Bonus/profit sharing pay - 401k with 4% company match - Phone allowance COMPENSATION Salary position - $65,000 to $80,000, D.O.E. Please reply with compensation requirements.

Source:  craigslist View Original Post
Location
7284 S Potomac St, Englewood, CO 80112, USA
Show Map
craigslist

You may also like

SB9 application help ( 85% complete) (san mateo)
2946 Linden Ave, Berkeley, CA 94705, USA
Coordinate with the San Mateo County staff and persuade them to complete our SB9 application. We have a survey and a split line and a geologic soil analysis done so we are 85% there but we still need some careful persuasive documentation and help negotiating with the County of San Mateo staff. After the basic SB9 split approval then help us a second time. Create an off the shelf building house plan and submit it to get the County to assess if they will accept our existing " non compliant" driveway. If the driveway is not acceptable then launch an appeal to the State of California via SB450 If you have the appropriate persuasive skill and are motivated to help us please drop us an email.
Construction Consultant (Morgan Hill)
17847 Serene Dr, Morgan Hill, CA 95037, USA
We are looking for a part time experienced person, who is semi-retired, with experience in construction management, budgeting, inspections and construction cost estimating working with a commercial general contractor, in all trades. Work involves visiting construction sites each month, meeting the construction team, review of contractor's payment applications, schedule, change orders, etc. Good written and verbal skills are needed. Good knowledge of Microsoft Excel and computers is also needed. A degree in; Construction Management, Architecture or Civil Engineering is a plus. Prior experience as a Commercial Project Manager with a General Contractor and/or as an Estimator is very helpful. Ideal person will have over 30 years experience. Trades person need not apply. Please do not apply if you are looking for a full time position or have a full time job and want to moonlight. E-mails without resume will not be considered. Tight deadlines need to be met each month.
Electrical Designer (san jose south)
37 Norton Ave, San Jose, CA 95126, USA
American Consulting Engineers Electrical, Inc. (ACEE) has been a prominent figure in the Bay Area for over two decades, dedicated to serving our local communities with excellence. We are an Electrical firm specializing in electrical engineering, enhancing our ability to cater specifically to the needs of our clients and strengthen client relations. SUMMARY • Reports to Project Principal/Manager • Assists Engineers, Project Managers, or Principal by performing the routine aspects of electrical engineering assignments, project design drawings, specifications subsequently providing electrical, lighting and low voltage system design & document production. Duties and Responsibilities Essential functions for this position: • Performs electrical engineering calculations including electrical load, conduit and electrical system sizing, and equipment (i.e. low/medium voltage power distribution systems, transformers, and panelboards) • Perform Title 24 lighting calculations, Photometrics and design lighting control. • Perform low voltage system design (i.e. security/fire systems, data/telecommunications systems, etc.). • Coordinates project assignments with those of other Project Managers, and Principals in their team. • Reviews drawings supplied by vendors, clients, engineers, architects and then recommend necessary changes. • Perform, determine and learn to understand electrical code to be able to implement design requirements. Respond to issues and work with City, State, and County officials for permits. • May attend site investigations, project kick-off and design review meetings, and interact with clients as their level of experience progresses. QUALIFICATIONS Knowledge • Expected to have a thorough understanding of electrical and lighting systems. • Familiar with low voltage systems; Fire Alarm and Data/Communications. • Aware of construction document organization and preparation. Skills and Abilities • Highly proficient with Auto/CAD to prepare electrical drawings. • Knowledge of Autodesk REVIT and Bluebeam for additional requirements to perform project task with clients. • Knowledge of AGI to perform photometric calculations. • Knowledge of EnergyPro to perform Title 24 lighting compliance. • Knowledge of word processing and spreadsheet software. • Knowledge of California Electrical, Energy Code and Building Codes. • Ability to provide and follow written and verbal directions and instructions. • Demonstrate the ability to learn quickly and adhere to new standards and technical requirements. • Able to layout electrical systems. • Demonstrate ability to handle and prioritize multiple projects. • Effective written and oral communications skills are desirable. Education, Credentials and Experience • Bachelor's Degree in Electrical Engineering. • Possess a Fundamentals of Engineering (FE) certification or have the qualifications to take the FE exam. EIT certification is preferred but not required. • Four years of working experience within the construction industry. • Experience with City permit process and DSA (Department of State Architect) approval process. Work Schedule • In office in San Jose, CA • Upon successful completion of training and/or probational period, hybrid schedule may be offered.
PROJECT ENGINEER | AISC METAL FABRICATOR
16706 Penn Rd, Mount Vernon, WA 98273, USA
PROJECT ENGINEER | AISC METAL FABRICATOR EDCO, INC. is a family-oriented manufacturing company seeking great people to join our team of talented engineers, fabricators, and machinists. EDCO provides a professional and fun environment working with a diversified set of customers, products, equipment, and manufacturing processes. An AISC Certified Fabricator, EDCO works with General Construction, Marine Construction, Renewable Energy, Space and Defense, and other industries with a need for metal fabrication and specialized custom equipment. EDCO is located in Skagit County north of the Seattle/Everett metro area. Skagit County offers beautiful views of Mt. Baker and the Olympic Peninsula, with easy access to an endless number of recreational activities. We are looking for an experienced Project Engineer. Our project engineers work directly with customers and our fabricators to ensure progress on all stages of the project lifecycle. If you are a motivated self-starter, have excellent communication skills, and are dedicated, collaborative, professional, and results-oriented, we think you might be a great addition to our team and would love to learn more about you. This position is part of our Project Management department and will be responsible for coordinating the complete sales, technical and administrative requirements of each project. Qualifications. • Manufacturing, Industrial or Process Engineering experience. • Ability and desire to serve a variety of industrial markets (i.e., aerospace, space and defense, marine & transportation infrastructure, civil construction, etc.). • Experience in sales and cost estimating. • Experience in all facets of project management. • Experience with Autodesk 3-D modeling software. • Familiarity with welding and machining trades/metal fabrication. • Strong written communication skills, including experience with writing work instructions, procedures, and proposals. • Must have a positive attitude, commitment to meeting deadlines and be dependable. • Must have a valid driver’s license and reliable transportation. Specific Activities. Activities include but not limited to: • Estimate work and administer contracts. • Solicit quotes from subcontractors and suppliers. • Purchase materials. • Use Autodesk Inventor to create detailed 3D designs for complex projects, specifying dimensions and materials related to the project. • Communicate, consult with, and participate in design and manufacturing support. • Oversee scope and work with a team to manage schedule, cost, risks, and resources. • Lead project meetings and ensure fabrication is to technical documents, plans and specifications. Education and Experience. • Bachelor’s degree from an accredited university with a degree in engineering. • Four to ten years related experience and/or training in the fields of project management, construction management, engineering, and manufacturing design; or equivalent combination of education, experience and training that provides the required knowledge, skills, and abilities. Work Location. Work is performed on-site. This position requires the employee to work onsite to collaborate effectively with multiple team members daily. Schedule. Monday-Friday Job Type. Full-time, Exempt position Compensation. $85,000-$110,000 DOE Benefits. EDCO offers an outstanding benefits package that exceeds industry norms for organizations of our size; that includes but are not limited to: • Medical Insurance • Vision Insurance • Dental Insurance • 401K • 401K Matching • PTO (Paid Time Off) • Paid holidays • EAP (Employee Assistance Program) We are proud to be a Drug Free Workplace and an Equal Opportunity Employer. All employment offers are contingent on a successful pre-employment screening and must pass a drug test including marijuana. Qualified candidates must include a cover letter and their resume when applying. We look forward to hearing from you!
$85,000-110,000
PE Professional Engineer
16721 96th Ave NE, Bothell, WA 98011, USA
A long-established Engineering Firm is seeking a Senior Licensed Professional Engineer to perform Investigations, Residential Structural Inspections, and Structural Design development. The duties may expand to include Property Condition Assessments, Reserve Studies, and Commercial Building Inspections. Perfect for semi-retirees or to complement your current workload. Flexible schedule. WA State PE license required.
Chief Technical Architect Job Opening (Brookline)
81 Boylston St, Brookline, MA 02445, USA
Sousa Design Architects is seeking a Chief Technical Architect to join our collaborative architecture and interiors firm. We are looking for an experienced, detail-oriented leader with a passion for multi-family, residential, and/or hospitality design and construction. The successful candidate will play a key role in guiding projects from conceptual development through construction documents and into the field. Key Qualifications: * 15–20+ years of relevant experience in architecture * Professional architectural registration required * Professional degree in Architecture * Expertise in all phases of design, construction documentation, and construction administration * Strong leadership and team collaboration skills * Excellent communication—both verbal and written * Exceptional organizational skills and self-motivation * Advanced proficiency in residential construction * Aid in development of design staff What We Offer: * Competitive compensation * Comprehensive benefits package, including: * 401(k) with matching * Health and dental insurance * Paid holidays and PTO * Flexible working environment with a strong emphasis on quality design and client service About Sousa Design Architects: Sousa Design Architects is a Boston-based, full-service design firm specializing in architecture, interiors, and graphic design. Our studio is recognized for award-winning hospitality, residential, and commercial projects. Through principal-level involvement, cutting-edge technology, and a commitment to design excellence, we deliver thoughtful and innovative solutions for our clients.
About Us
Terms of Use
Privacy Policy
Help
Contact Us
FAQ
Cookie
Cookie Policy
Cookie Settings
© 2025 Servanan International Pte. Ltd.