PLUMBERS (Jacksonville)

General Construction laborers Needed to help build homes and landscape! $18-22 per Hour We drug test and background check Text 860-657-6352 to apply

Helical Drilling, a New England based design build Geotechnical Engineering firm is looking to fill a Quality Control Technician’s role. This role would ensure that the project’s specifications are followed and that Helical Drilling’s work has been installed according to the design. They will work with the Helical Drilling (HDI) field supervisor, HDI office, the general contractor, and the project geotechnical engineer. The individual is responsible for recording accurate field and production information on a daily basis along with recognizing unknown anomalies that can affect the original design parameters. When changes or anomalies do occur, they also need to collaborate with the above mention entities on solutions and/or repairs. A successful QC Tech will ensure a project has been built correctly. Responsibilities and Duties: • Read, understand, and follow the design submittal and specifications as it relates to construction of the project. • Document and transfer to field layout plans as-builts, test pier locations, offsets, newly discovered utilities, etc. • Read and understand the boring logs. • Inform field supervisor of on-site change of conditions. • Review design submittal to verify information is accurate. • Complete accurate and timely Daily Field Reports (DFRs). • Prepare plans for field production and use. • Document and report all anomalies. • Participate in project kick off and closeout calls. • Communicate with the HDI office, GC, and/or Geotechnical engineers as directed by field supervisor. • Keep track of production and assist in sequencing of installing elements. • Introduce and be engaged with the on-site geotechnical consultants. • Calculate volume of materials needed (concrete, cement, grout, sand mix, infield mix, etc.) • Setup and preform load tests. Understand the required criteria for execution and completion of a successful test. • Record and complete all logs (drilling, driving, sheeting, grouting, test piers, installation, etc.) • Review the Quality Control Summary sheet and As- Built information at the end of a project for accuracy before submitting to the office. • Enter and record accurate information into the logs. REQUIREMENTS: • MUST HAVE: Reliable Vehicle and Valid Drivers License (We work all over New England) • 1-5 years of experience as a QC or laborer with QC experience in a fast paced construction company-Preferred • OSHA 10 Preferred • Ability to lift 50-100 lbs. • Must be able to work assigned hours with crew with some overnights • High School Diploma or GED equivalent required *Must be able to speak, read and write English and be a US Citizen ESSENTIAL KNOWLEDGE AND SKILLS * Attention to detail * Responsible attitude * Understanding of basic geometric formulas * Ability to read, interpret, and scale plans * Ability to use a tape measure for field layout * Ability to use elevation control devices * Well organized * Confident * Takes care to complete tasks fully and well * Labor as needed * Versatile BENIFITS * 100% Company Paid Health and Dental Care (Single or Family) * 3 Weeks PTO (Paid Time Off) * 9 Paid Holidays * OT After 8 Hours * Rarely Work Weekends * Paid Travel Time and Mileage * Per Diem for Overnight Travel * Paid Hotel Stays (Single Rooms) * 401 K Contribution * Continued Training and Certifications * ESOP, Employee Stock Ownership Plan Equal Opportunity Employer

Our Indianapolis Shop has an immediate need for both an experienced MIG Welder and a Tig Welder. Fabrication experience is a plus but much of the work is pretty simple. The MIG welding pay will be based on experience and skills. We can negotiate based on where you land ($25 - $29). TIG Welder starting pay can go up to $32 per hour if you have all your own tools and equipment. We generally start out $28-$29 based on skillset. We will pay more to start if you can pass our pipe weld test. Anyone coming out of school with certs is welcome to apply. Don't overthink requirements because we have entry level positions however: Ideal TIG candidates can: - Read and interpret blueprints drawings and specifications to determine the layout and assembly of pipes - Measure and mark pipes for cutting threading and welding - Assemble and secure pipe fittings and related equipment according to specifications - Inspect completed welds to ensure they meet quality standards - Test pipes for leaks using pressure gauges or other testing equipment - Repair or replace damaged pipes or fittings as needed If you are talented and just do not have tools/equipment we can discuss your situation but pay would be reduced. We do phone screens to brainstorm if you might be a potential fit. If you send an email be sure to include your phone number. We won't email back and forth. We prefer to call and save both of us time. Call Ryan direct at (317) 226-3287

RAIN GUTTER INSTALLER MUST BE ABLE TO CARRY AND WORK OFF 2 STORY LADDERS MUST HAVE CONSTRUCTION EXPERIENCE MUST BE ABLE TO WORK FULL TIME CLEAN CDL

Job Title: Machinist – 2nd Shift Location: Indianapolis, IN 46256 Duration: 3+ Months (Contract) Shift: Monday – Friday, 2:45 PM – 10:45 PM (2nd Shift) Pay Rate: $40.00 per hour Job Summary We’re seeking an experienced 2nd Shift Machinist to operate and assist with CNC equipment setup in a precision manufacturing environment. This role involves machining high-quality components to meet strict specifications and ISO standards. Experience is required — no training available. Key Responsibilities Assist in setup and operation of CNC and conventional machining equipment. Fabricate, modify, and repair parts per specifications using lathes, mills, and grinders. Measure and inspect finished parts to ensure conformance to blueprints and tolerances. Perform tooling maintenance and basic troubleshooting. Maintain a clean and safe work area, following all quality and safety protocols. Run multiple machines simultaneously as needed. Qualifications Associate degree or technical school certification in machining or related field preferred. 1–3 years of machining experience (CNC experience required; Willemin preferred). Ability to read and interpret blueprints and technical drawings. Strong attention to detail and precision measurement skills. Works well under supervision with the ability to follow detailed instructions. Apply Today! Please reply to this posting with your resume and contact details for immediate consideration.

Flooring Installers Needed / Necesitamos Instaladores De Piso Interior Logic Group – Property Services, the leader in Multi-Family, Single Family and Senior Living flooring, is now looking for highly talented installers and contractors of carpet, vinyl and LVP Flooring. We offer competitive rates and pay weekly. $500+ sign-on bonuses available for eligible contractors! Contact Dave via call, text or email: dave.becker@ilginc.com or (505) 975-4473. Interior Logic Group - Property Services, líder en pisos multifamiliares, casas residenciales de renta y propiedads para personas mayores, está buscando buenos instaladores y contratistas de alfombras, pisos de vinilo y LVP. Ofrecemos tarifas competitivas y pagamos semanalmente. Bono de $500 disponible para nuevos contratistas elegibles. Para obtener más información, llame, envíe un mensaje de texto o envíe un correo electrónico a Dave.