Machine Operator - Manufacturing (Georgia, VT)

Position summary: Operate CNC press brake and laser cutting equipment, in both a prototyping and production capacity. Conduct “job shop” sheet metal work to fulfill new or existing production orders, on a recurring and repeat basis, according to required delivery schedules. In addition to production work, conduct R&D sheet metal work, in the form of short run/one-off projects to prototype new designs as they are created, and provide design input and feedback as applicable to improve and help create new designs. Manage the production schedule and keep a running priority of existing and upcoming work to ensure deadlines are met, for both R&D and production jobs. Employee is expected to carry a manufacturing project from raw material, through production, to packaging and prep for shipping. Ideal applicant has experience in welding, as well as other manufacturing processes like fastener installation and using hand/power tools, although these abilities can be trained on the job to a certain extent. Primary materials to be used are mild steel, stainless steel and aluminum, with potential to use additional materials as required. Employee may be needed to deliver parts directly to clients, generally located in the greater Seattle area. Nice-to-have: Experience with a modern Amada control interface Advanced fabrication techniques (skilled in MIG/TIG welding, etc.) Essential Responsibilities: Run CNC sheet metal equipment: laser cutting and brake forming (and manual machines as applicable) in production and prototyping capacities Run multiple machines simultaneously as required, and/or bounce back and forth between machines Check and monitor parts being run; maintain attention to detail in every aspect of the project Program parts at the console Familiarity with speccing/installing hardware Interpret and work off of manufacturing drawings Perform typical post-production such as deburring, polishing, cleaning, etc. Perform QC and dimensional verification to ensure standards are met and maintained Perform daily and periodic maintenance on machines (fluid levels, chip clearing, etc.) Be accountable and on time; maintain clean and orderly workspace Work as a team member and maintain a scrutinous eye for ways that a part or a project could be improved (this role is not simply button pushing or "turn off your brain" production) In downtime between projects, contribute to the R&D/production effort through collaborative problem solving with other team members, and assist with other projects Education and Experience: Trade school for sheet metal manufacturing, or equivalent experience Proficiency in basic math required for programming and operation of machines Examples of personal projects and/or creative exploration and self-education are preferred Metal fabrication and general shop work experience preferred Bonus points if applicants are already familiar with Laguna laser cutters and Amada press brakes Physical Requirements: Ability to sit or stand for extended periods of time Operate in a shop environment that is frequently noisy Wear proper PPE as required by task Lift or move between 10-50 lbs regularly Operate small forklift or pallet jack Occasionally assist team members in other projects throughout the shop, like relocating equipment, etc. Use hand and power tools (with wood and metal) in a basic or “homeowner” capacity at a minimum Compensation/benefits: Flexible work schedule including opportunities for occasional remote work After-hours access to the R&D Shop for personal projects Comprehensive benefits program including subsidized medical, dental, and vision insurance for employees Eligible for Overtime Pay Company 401(k) plan 14 days of PTO (7 sick days and 7 vacation days) 8 paid Holidays This job description is not exhaustive and the position may include additional responsibilities and expectations not listed here. This job posting is not an employment contract, and employees of this company are employed on an “at will” basis and may be terminated at any time. Please respond with resume and a brief introduction, and include your email address in the subject line.

Position summary: This role is more than a rank-and-file machinist or a “just make this part” machinist. It is an “R&D machinist” with a designer’s mind, who is a problem solver, conceptual thinker, and who is eager to figure it out, through individual effort as well as in collaboration with the team. This position will be largely centered around programming and machining custom parts in one-off or small batch quantity, which may need redesign or rework as the project progresses. Medium-sized, production-style machining projects may also be required. Most parts are designed from scratch by in-house designers, and this position will require fluency with CAD software (Solidworks), not just CAM, as it is expected that machinists can conceptualize and draw a design in CAD, not just carry out the steps to machine it. Essential Responsibilities: Run CNC equipment (and manual machines as necessary) in production and prototyping capacities Run multiple machines simultaneously as required Check and monitor parts being run; maintain attention to detail in every aspect of the project Program parts using Fusion 360 and HSM Works Have proficiency with Solidworks design software Create, interpret and revise manufacturing drawings Perform typical post-production such as deburring, polishing, etc. Perform QC and dimensional verification to ensure standards are met Perform daily and periodic maintenance on machines (fluid levels, chip clearing, etc.) Be accountable and on time; maintain clean and orderly workspace Work as a team member and maintain a scrutinous eye for ways that a part or a project could be improved (this is not simply button pushing or "turn off your brain" machining) At times between machining projects, contribute to the R&D effort through CAD work or collaborative problem solving with other members of the design and manufacturing team as required Education and Experience: Trade school for machining practices or equivalent experience Proficiency in basic math required for programming and machining Design experience in the form of product development or engineering, etc. Examples of personal projects and/or creative exploration and self-education are preferred Metal fabrication and general shop work experience preferred Proficiency in CAM programming in HSM Works/Fusion 360, including advanced techniques like multi-axis and 3D toolpaths. Nice to have: Existing familiarity with HAAS/PROTOTRAK/TRAK mills and lathes Experience in an ISO / ITAR setting Experience with a Quality Management System (QMS) Experience operating a CMM Physical Requirements: Ability to sit or stand for extended periods of time Operate in a shop environment that is frequently noisy Wear proper PPE as required by task Lift or move approximately 10-50 lbs regularly Operate small forklift or pallet jack Occasionally assist team members in other projects throughout the shop, like relocating equipment, etc. Use hand and power tools (with wood and metal) in a basic or “homeowner” capacity at a minimum Compensation/benefits: Flexible work schedule including opportunities for occasional remote work After-hours access to the R&D Shop for personal projects Comprehensive benefits program including subsidized medical, dental, and vision insurance for employees Eligible for Overtime Pay Company 401(k) plan 14 days of PTO (7 sick days and 7 vacation days) 8 paid Holidays We are ultimately seeking talented individuals with a wide range of experience and abilities. Prospective applicants whose work experience is more firmly rooted on the design/engineering side but still have strong abilities in machining and programming are encouraged to apply. This job description is not exhaustive and the position may include additional responsibilities and expectations not listed here. This job posting is not an employment contract, and employees of this company are employed on an “at will” basis and may be terminated at any time. Please respond with resume and a brief introduction, and include your email address in the subject line.

We are seeking a Sanitation/Housekeeping/Utility Associate for a local Food Manufacturer to join our team! You will thrive in a fast-paced environment and dedicate time to expanding our growth, brand and reputation. This is a part time position with full-time potential Schedule: Day time hours (no nights), M-Thurs with a three day weekend! What you will do: Work with cleaning equipment such as pan washer, steam cleaner, and dry vac Coordinate cleaning and sanitation duties with team Following SOPs for cleaning and sanitizing bakery equipment Assist bakers in light duties Work with management to create more efficient systems What we're looking for: Previous experience cleaning in a warehouse environment helpful Familiarity of ware-washing equipment Dependable and willing to learn about baking Food Safety Training a PLUS A typical day may include dry/wet mopping production floor, scraping bun pans, cleaning bakery equipment, trash removal and bathroom cleaning. Please send resume for consideration.

We have several MAJOR food manufacturing positions available! Positions on the South and North side of town. Come in tomorrow to apply! - Production WORKERS!!!! - Production Leads - Quality Control - Warehouse Worker with Sit Down Forklift, Inventory Control, and Shipping/Receiving Experience - Maintenance Mechanic CAN START AS EARLY AS NEXT WEEK! Monthly attendance BONUS! *Resumes REQUIRED for ALL positions* *MUST HAVE EXPERIENCE IN FOOD MANUFACTURING and FOR SAFETY REASONS ALL POSITIONS REQUIRE THE ABILITY TO READ, WRITE, AND COMMUNICATE IN ENGLISH* Available Shifts: Day Shift – 7:00 A.M. to 3:30 P.M. 2nd Shift – 3:00 P.M. to 12:00 A.M. 3rd Shift - 11:00 P.M. to 7:30 A.M. This CAN RANGE FROM MANY DIFFERENT SHIFTS. Background and Drug Testing are part of the screening process. Valid proof of identity and eligibility to work in the US will also be REQUIRED. Please apply online at www.remedystaff.com and call one of our offices below to schedule an interview tomorrow: North Office - 210.366.3400 | 2518 Nacogdoches Rd South Office - 210.973.6878 | 1950 SW Military Dr *Interviews are scheduled based on the openings we currently have available. Please include all work history when applying. It is also highly encouraged to attach a resume for review. We appreciate your patience during the application review and interview process*

We are a leading manufacturing company specializing in equipment manufacturing and technology. Blentech Corporation is a manufacturer​ of custom food processing systems based in Santa Rosa, CA. For over 35 years, we have creatively blended function, durability, sanitary design, safety, and performance into the design and construction of Blentech systems. Our team is dedicated to delivering high-quality components with tight tolerances for various industries. We are currently seeking a Welder II or III to join our Manufacturing Team. The ideal candidate will be a detail-oriented, self-motivated professional who has worked as a Stainless-Steel Welder II or III (3+ years of experience requested). Depending on experience, candidates will be considered for a Level II or Level III position. TIG welding stainless steel (GTAW) MIG welding stainless steel (GMAW) Stainless steel fabrication  Stainless steel experience is a must, with at least 3 years of experience Full Time: 40+ hours per week Hours: We run 3 Shifts 5 days 8-hour shift: Monday - Friday 6:00 am - 2:30 pm   Or 4 days 10-hour shift: Monday – Thursday 6:00 am – 4:30 pm 4 days 10-hour Swing Shift: Monday - Thursday 2:30 pm - 1:00 am (15% shift differential) The ability to lift 40+ pounds, forklift, and driver’s license is a plus. We offer 100% paid Medical, Dental, and Vision for the employee, a 401k with match, PTO, and a boot allowance. Pay Range DOE: Welder II $26.23 - $33.56 Welder III $29.40 – $38.41 If you have worked with Stainless Steel Fabrication and want to become a member of our winning team of motivated people and would like to grow with us, please apply. Send your resume along with a list of work experiences and references. You must be within driving distance of the factory. This is an on-site position only. We are Not accepting International Applicants.

Well-established CNC sheet metal manufacturing firm seeking a production/assembly worker. POSITION SUMMARY: Hardware assembly with hand tools into parts across one or more production areas ensuring required standards of quality are met DUTIES and RESPONSIBILITIES: • Demonstrate good hand and eye coordination with the ability to use both hands in installing small hardware pieces (screws/rivets) and insulation. • Optimize daily production and on-time delivery performance • Notifies Supervisor of problems which affect the production/quality of parts • Completes all assignments in a timely manner and procedures are followed. • Responsible for quality and quantity of products. • Works with limited or no supervision • Must have knowledge of material speeds and feeds, fixturing and tooling. REASONING ABILITIES: • Uses good judgment; seeks advice and help when necessary. • Must be able to distinguish between acceptable and non-acceptable parts. OTHER SKILLS & ABILITIES: • High attention to quality while maintaining a high rate of productivity. • Can safely lift 50 pounds, standing/walking in relatively confined areas EDUCATION / TRAINING / EXPERIENCE: • High School diploma or equivalent. • Must have two years of experience as an assembler Please send in your resume. You must have two years of experience in as an assembler. Lots of OT available.