Auto Technician Wanted- NO RESUME NEEDED (Gresham)

Hammer & Hand is seeking experienced full-time Frame-to-Finish Carpenters to join our Portland team! Frame-to-Finish Carpenter QUALIFICATIONS • Approximately 5 years of custom carpentry experience including framing, envelope, and trim install • Experience with remodel and new build projects • Knowledgeable of materials, methods, and the tools involved in the construction of buildings and other structures • Must be able to keep accurate records and perform timekeeping, including electronic submittals • Must have reliable transportation, a valid driver’s license, and a clean driving record • Must have full selection of tools to perform the work • High level of accuracy and pride in your craft • Ability to lift 50lbs APPLY HERE: https://hammerandhand.com/careers/ No phone calls, please. Thank you for your interest! To apply, please submit an application through the link above, and we’ll be sure to reach out to you if we decide to move forward. -- About Hammer & Hand Established in 1995, Hammer & Hand is a general contractor celebrating 30 years in partnership with clients and architects in the Pacific Northwest. Our reputation is built on decades of dedication from individuals who are as passionate about their jobs as they are about their lives outside of work. Based in Portland and Seattle, our firm serves clients by empowering employees, harnessing 21st century building science, and advancing the tradition of craftsmanship. From classic remodels to design-forward commercial build-outs and high performance passive buildings, Hammer & Hand’s projects are crafted with care and built to last. We work hard to foster an atmosphere that supports our most valuable asset: our people. As such, we are proud to announce that we are on the path to 100% employee ownership. We offer a dynamic workplace, as well as a full range of benefits, including: • Competitive Industry Wages • 100% Employer Paid Medical and Dental Benefits • Optional Vision Plan • Alternative Health Care reimbursement program for chiropractic, massage, and acupuncture • 401k Retirement Savings Plan • Employee Stock Ownership Plan • Paid Time Off and Paid Holidays • Long-Term Disability Insurance • Profit Sharing • Employee Assistance Program We are always looking for the best talent to join our team and are aware that a great candidate for a job may come from a less traditional background. Studies have shown that women, LGBTQIA+ individuals, and people of color are less likely to apply for a job when they believe they may not meet all of the qualifications in a job description. We strongly encourage you to apply even if you’re not sure you meet every one of our qualifications. If you are unsure, you can contact us through our website with questions about how this would be determined. We do occasionally have openings for those looking to hone their craft and build their skillset. These are paid positions. Please do not hesitate to apply if you feel you have the aptitude to succeed with us! See more about our employment philosophy here: http://hammerandhand.com/about/employment/ Hammer & Hand is committed to equal opportunity in employment and does not discriminate based on race, color, creed, religion, sex, age, national origin, mental/physical disability, sexual orientation, gender identity/transgender status, military/veteran status, genetic information, or any other status/characteristic protected under applicable law.

Hammer & Hand is seeking experienced full-time Frame-to-Finish Carpenters to join our Portland team! Frame-to-Finish Carpenter QUALIFICATIONS • Approximately 5 years of custom carpentry experience including framing, envelope, and trim install • Experience with remodel and new build projects • Knowledgeable of materials, methods, and the tools involved in the construction of buildings and other structures • Must be able to keep accurate records and perform timekeeping, including electronic submittals • Must have reliable transportation, a valid driver’s license, and a clean driving record • Must have full selection of tools to perform the work • High level of accuracy and pride in your craft • Ability to lift 50lbs APPLY HERE: https://hammerandhand.com/careers/ No phone calls, please. Thank you for your interest! To apply, please submit an application through the link above, and we’ll be sure to reach out to you if we decide to move forward. -- About Hammer & Hand Established in 1995, Hammer & Hand is a general contractor celebrating 30 years in partnership with clients and architects in the Pacific Northwest. Our reputation is built on decades of dedication from individuals who are as passionate about their jobs as they are about their lives outside of work. Based in Portland and Seattle, our firm serves clients by empowering employees, harnessing 21st century building science, and advancing the tradition of craftsmanship. From classic remodels to design-forward commercial build-outs and high performance passive buildings, Hammer & Hand’s projects are crafted with care and built to last. We work hard to foster an atmosphere that supports our most valuable asset: our people. As such, we are proud to announce that we are on the path to 100% employee ownership. We offer a dynamic workplace, as well as a full range of benefits, including: • Competitive Industry Wages • 100% Employer Paid Medical and Dental Benefits • Optional Vision Plan • Alternative Health Care reimbursement program for chiropractic, massage, and acupuncture • 401k Retirement Savings Plan • Employee Stock Ownership Plan • Paid Time Off and Paid Holidays • Long-Term Disability Insurance • Profit Sharing • Employee Assistance Program We are always looking for the best talent to join our team and are aware that a great candidate for a job may come from a less traditional background. Studies have shown that women, LGBTQIA+ individuals, and people of color are less likely to apply for a job when they believe they may not meet all of the qualifications in a job description. We strongly encourage you to apply even if you’re not sure you meet every one of our qualifications. If you are unsure, you can contact us through our website with questions about how this would be determined. We do occasionally have openings for those looking to hone their craft and build their skillset. These are paid positions. Please do not hesitate to apply if you feel you have the aptitude to succeed with us! See more about our employment philosophy here: https://hammerandhand.com/careers/ Hammer & Hand is committed to equal opportunity in employment and does not discriminate based on race, color, creed, religion, sex, age, national origin, mental/physical disability, sexual orientation, gender identity/transgender status, military/veteran status, genetic information, or any other status/characteristic protected under applicable law.

Labors and Mason’s wanted!Residential block houses in Ocala, Florida

Well Bilt Industries is looking for Welding and Fabricating personnel to join our team! Candiate is required to have the following qualifications: -Proficient in MIG Flux Core welding -Read and use a tape measure -Experienced with torches and grinders -Able to read and interpret blueprints and weld symbols -Strong fabrication skills preferred -Must pass a weld test -Reliable and able to work in a team-focused environment -Safely operate equipment What We Offer: -Long-term opportunity with potential for advancement -Health Insurance Options -Positive and professional work environment -Competitive pay (based on experience and skill level) - Overtime opportunities

We are a extremely successful busy automotive/transmission repair shop in Vancouver, WA Are you looking to get paid what your worth, and build a career? Do You Look For Advancement? Do You want a Better Opportunity in this Industry? ● Weekly In Person Training and More Training Available ● Excellent Pay Based On Experience. $26 to $50 an hour based on you skill set ● Yearly Pay Increases based on performance ● NO WEEKENDS NO LATE NIGHTS! 5 day work Week Mon-FRI ● Medical and Dental Plans ● 401K opt in ● Great work environment And Culture ● Team friendly atmosphere ● And more! If you want to the success you believe you can be, Give me a call today. call or text anytime: (951) 490-1583 Mechanic, tech, auto, automotive, R&R , transmission, auto repair, auto shop, dealership, ASE, master tech, Classic, Cars, Wrench, American, Asian, Ford, Chevy, Fuel Injection, Snap On, Mac, Tool, Tools, Matco, Socket, Honda, Toyota, Lexus, Tahoe, Suburban, GMC, Nissan, Scion, Dodge, Scanner, Diagnostics, Autel, Vantage, Modis, Solus, Verus, Maxsis, Cars

The current tech was making over 150k a year, turning 60 plus hours a week. He's the main/only tech in shop so you don't have to worry about not getting hours or competition in the shop. We Are Looking For An Experienced Mechanic We Have A Very Strong Customer Base And Growing Daily The work is here and with a motivated tech, the potential is endless. We pride ourselves by fixing the car right the first time and helping customers maintain their vehicles properly and safely. We do work in a fast pace environment and need a technician who can multi task. We Are A Neighborhood business and pride ourselves on quality, care and customer service. Tech Must have past experience and be able to properly diagnose vehicles and have own tools Inspection, Emission, And CRT are a big plus but not required. Experience with Mitchell as well is a plus but not required. ASE Certs also a big plus but not required We have a great team, just need to add a great mechanic Hours Required To Work: Monday-Friday 8am-5:00pm Saturday 8am-2:00pm Please E-mail us Your Resume Or Previous Work Experience Ask for Sam (703)549-0225 or send us a resume