Construction Inspector

We are currently looking for a Substation Physical Engineer from 0 to 5 years of experience. Duties Assist with create/modify detailed design for Substation: Control building (relay panels, facilities, cable raceways, trays, etc.) Busbar and strain bus Equipment & support structures Assembly drawings Cables and connectors Lightning protection and lighting Grounding grid Conduit and tranches Perform basic calculations such as: Grounding Lighting and lightning Cable ampacity Tray sizing Trench sizing Conduit sizing Assist project manager to develop scope of work and conceptual design for the projects; Communicate and coordinate project activities with project manager, client, and others as needed; Take personal responsibility for the quality and accuracy of one's work; Requirements A Bachelor’s Degree in Electrical Engineering, Mechanical or Civil is preferred. 0 to 5 years of experience in Substation Physical design. Willing to pursue PE license in NY and NC. Desired knowledge of Institute of Electrical and Electronic Engineers (IEEE), NERC, NEC, NESC, NEMA, and ANSI standards used in designing substation is critical. Periodic travel, ability to visit project sites. Salary Range: $60,000 - $86,000 per year The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. Flexible Work Schedule Health/Dental Insurance 401k Plan with Employer Match Short & Long Term Disability Profit Sharing Paid Time Off Leadership Development Program Fitness Reimbursement Tuition Reimbursement Referral Bonus Program Wellness Program Team Building Events Community Service Events

A long-established Engineering Firm is seeking a Senior Licensed Professional Engineer to perform Investigations, Residential Structural Inspections, and Structural Design development. The duties may expand to include Property Condition Assessments, Reserve Studies, and Commercial Building Inspections. Perfect for semi-retirees or to complement your current workload. Flexible schedule. WA State PE license required.

Spalding, a Saalex Company is seeking Journeyman Test Engineer in Patuxent River, MD to support the development and testing of the H-1 platform avionics test facility.  Spalding is a professional services company delivering cutting-edge solutions to the Department of Defense since 2001. Our expert-level solutions include software development, information technology, program management, financial management and business intelligence services.  Spalding offers competitive compensation, career development, flexible work schedules and excellent benefits.   Position Type: Full-Time Salary: $78k-$132k annually (depending on experience) Work Location: Full-time onsite (see onsite requirements below) **On-site Requirements: This position is full-time onsite at Patuxent River, MD and may be eligible for reoccurring telework, but will require an onsite presence at the H-1 SIL Facility for greater than or equal to 75% of the work week.   Essential Functions: Receiving requirements and developing plans & procedures based on test bench operation and ICDs Develop and maintain Test Documentation Ensure the Test Case Matrices cover the system requirements Develop test procedures to verify the system requirements are being satisfied for each project Provide inputs to and participate in a peer review of TCMs and Test Plans Identifying & reporting issues/bugs with the JIRA system Provide input to the Test Plan as required to ensure alignment to the TCM Provide recommendation for testing to be accomplished for each project Validate and verify system requirements Analyze Test Data Document Test Result Outbrief test results at Test Integration Meeting Generate relative reports as required Document deficiencies Generate draft ATF discrepancies or draft SAR documents and provide them to appropriate personnel Participate in SRB Conduct/execute system integration testing Execute test procedures Coordinate with technicians, ATF Tech Lead, and Technical SMEs to complete test planning and execution Other duties as assigned or required Requirements Required: Candidate must have experience working with project documentation such as ICD, SDD, system performance specifications Working knowledge of test tools and MIL-STD-1553 is required 3 to 10 years of experience related to the functional duties BS degree required Desired: Understands and maintains basic test aircraft and equipment configurations Experience testing military avionics in a government facility Proficient with MS office products Experience with NAVAIR Test Planning and Test Reporting Experience with NAVIAR Integrated Test & Evaluation Management System (iTEMS) Security Clearance: Active Secret clearance required. Requirements to obtain a clearance include US Citizenship, security investigation, etc. Education: Bachelor's Degree from an accredited college or university required. Bachelor's Degree in an engineering field desired. Benefits Health Care Plan (Medical, Dental & Vision) Retirement Plan (401k, IRA) Life Insurance (Basic, Voluntary & AD&D) Paid Time Off (Vacation, Sick & Public Holidays) Short Term & Long Term Disability Training & Development Wellness Resources Stock Option Plan

Umbra builds next-generation space systems that observe the Earth in unprecedented fidelity. Our mission: Deliver global omniscience. To stay ahead of climate change, geopolitical risk, and other major crises and issues, we need a global understanding of what is changing, where, and how fast. Umbra provides easy access to the highest quality commercial satellite data available, which is an indispensable tool for the growing number of organizations monitoring the Earth. We empower our customers to create solutions that inform, inspire, and address our planet’s most pressing needs. We’re helping to create a brand-new industry that has never meaningfully existed before. We’re looking for a Mission Operations Vehicle Engineer to join our fast-paced Mission Operations team. You’ll work directly on the front lines of on-orbit spacecraft operations - monitoring, commanding, and helping maintain the health and safety of Umbra’s growing constellation of Synthetic Aperture Radar (SAR) satellites. For this position we are looking for a special emphasis on scripting and tool development, as well data analysis skills for analyzing spacecraft performance. Our aim is to hire this position to work in Umbra's Santa Barbara, CA or Arlington, VA office. This position offers a flexible work schedule, however during periods of system testing, anomaly resolution, or post-launch, it may be necessary to work off-hours shifts. Key Responsibilities Support daily spacecraft operations, including planning, monitoring, and anomaly resolution. Participate in on-call rotations to monitor satellite health and respond to alerts. Monitor, evaluate, and help improve radar satellite imagery and other products. Analyze satellite telemetry and generate state-of-health reports. Develop and maintain tools and scripts for automation, telemetry analysis, and mission planning. Collaborate with systems engineering, flight software, and ground teams to improve satellite operations processes. Contribute to documentation, training, and process development as we scale the constellation. Requirements Required Qualifications Bachelor's degree or equivalent experience in a related STEM field (such as aerospace, systems engineering, physics, or computer science). 2+ years of experience in spacecraft systems engineering. Strong understanding of spacecraft subsystems (e.g., ADCS, power, comms, thermal). Comfortable with: a scripting language such as MATLAB or Python; orbit analysis or mission design tools such as STK, GMAT, or Free Flyer; and version control software such as Git. Excellent communications skills, ability and desire to work collaboratively in a team environment, and willingness to learn new skills and technology. Willing to support, as needed, on-call shift assignments and odd hours near launches, such as overnights and/or weekends. Comfortable working in a dynamic and fast-paced development environment. Comfortable working on high-level tasks independently. Excitement to share knowledge and experience across the engineering team. Desired Qualifications Experience working with radar or remote sensing satellites. Familiarity with mission operations software, ground control systems, or command scripting. Exposure to low Earth orbit (LEO) mission dynamics and constraints. Benefits Flexible Time Off, Sick, Family & Medical Leave Medical, Dental, Vision, Life, LTD, STD (employer funded) Vol Life, Critical Illness, Accidental, Hospital Indemnity, Pet Insurance (employee funded) 401k with 3% non-elective company contribution Stock Options Free Parking Free lunch daily in office Umbra is an Equal Opportunity Employer. We do not discriminate in hiring on the basis of sex, gender identity, sexual orientation, race, color, religious creed, national origin, physical or mental disability, protected veteran status, or any other characteristic protected by federal, state, or local law. Employment Eligibility Verification In compliance with federal laws, all hired persons will be required to verify their identity and eligibility to work in the United States by completing the required Employment Eligibility Verification Form (I-9 Form) upon hire. ITAR/EAR Requirements This position may include access to technology and/or data that is subject to U.S. export controls pursuant to ITAR and EAR. To comply with federal export controls, all persons hired must be a U.S. citizen, U.S. national, U.S. lawful permanent resident, refugee or asylee as defined by 8 U.S.C. § 1324b(a)(3), or must otherwise be eligible to obtain the required authorizations from the U.S. Department of State and/or U.S. Department of Commerce as applicable. Pay Transparency This job posting may cover multiple career levels. To ensure greater transparency, we provide base salary ranges for all roles, regardless of location. Our standard pay ranges are based on the role’s function and level, benchmarked against similar growth-stage companies. Compensation may vary based on geographical location, as certain regions may have different cost-of-living factors. The final offer will also be influenced by the candidate's skills, responsibilities, and relevant experience. Compensation Range The Compensation Range for this role is $95,000 - $120,000 DOE.

Company Overview: LaBella Associates was established in 1978 and has been voted a Top Workplace for the last five years. We are headquartered in Rochester, NY with offices across New York, Ohio, Massachusetts, Pennsylvania, Virginia, North and South Carolina, The United Kingdom, Spain, and others. LaBella is a multi-disciplined architectural and engineering firm dedicated to client satisfaction through teamwork, respect, and trust. We provide services that take a project from start to finish—from a feasibility study or compliance review to record drawing development and everything in between. Job Overview: We are currently seeking Senior Gas Project Engineer(s) for our gas group in several locations throughout the North East. If you have interest in any of these locations, we would encourage you to apply. The ideal candidate has at least a Bachelor’s degree in Civil or Mechanical Engineering (or other engineering field with the required experience). The successful candidate will act in a consultant role for our existing utility clients. Types of projects include (but are not limited to) main and service replacements, system improvements, pressure upgrades, new business main extensions, highway improvements, regulator station and facility design, Gate Station design, odorization, pre-heat, critical crossing and horizontal directional drilling design, odorization and pipe conditioning, Integrity Projects and Integrity Management, Field Inspection, and more. If you have Integrity, Pipeline, and/or Facilities experience, there is a good chance this opportunity is for you! Duties – The following lists typical project responsibilities. This may vary based on the nature of a project and/or client needs: Conduct preliminary field work which would include carrying approximately 10 lbs. throughout the work day. Expected amount of field work would be approximately 5-10% of annual work load, but may vary based on client needs and project assignments. Coordinate with all project stakeholders and act in the interest of our clients to support their project goals. Production of quality basemap and construction drawings for client, municipal, and regulatory agency review using AutoCAD. Including details, BOM, Material Specifications, O&M manual development, management of inter-disciplinary projects, and more. Development of energization and de-energization procedures. Contractor and construction cost estimation. Alternative Analyses and detailed comparisons including Risk Assessment Code and Compliance Reviews, Gap Analyses, O&M and Construction standard audits and modification. DIMP and/or TIMP plan development and/or audits and/or improvements. Completion of complex engineering calculations (stress, pipe flow, heat transfer, external loading, etc.). Familiarity with CFR 192, CFR 193, and/or other applicable regulations to ensure work products are compliant. Data entry into SAP and/or Maximo Work Management System to support your project work in our clients’ WMS’s. Apply for and obtain municipal highway permits and other right-of-way permits (e.g. NYSDOT, railroad, Thruway Authority, Canal Corporation, etc.) Coordinate with landowners to obtain right-of-way / easement when required. Create as-built records from inspector’s field notes. Supervise, mentor, and train junior staff. Act as a role model. Set and monitor goals, objectives, and progress. Assist with marketing, business development, and internal SOP development. Requirements This is a Senior Level position, and you must have proven / demonstrated the ability to perform the duties of this role through previous employment. Bachelor’s or Masters degree in Civil/Mechanical Engineering or other closely related field. Professional Engineering license and/or GTI Competent Engineer Certification (preferred) Minimum of 10 years of related experience for Natural Gas Operator or consultant in Natural Gas industry (Transmission and Distribution preferred) Strong verbal and written communication skills. Presents and conducts themselves in a professional manner. Able to pace themselves and work within defined project budgets. Ability to balance multiple projects and assignments and prioritize their individual workload. Need to possess a valid driver's license with a safe driving history (required). Excellent organizational skills. Ability to carry 10 lbs. throughout the workday sometimes through difficult terrain such as forests, agriculture fields, etc. Ability to pass a client background check. Salary Range: $125,000 - $160,000 per year The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. o   Flexible Work Schedule o   Health/Dental Insurance o   401k Plan with Employer Match o   Short & Long Term Disability o   Profit Sharing o   Paid Time Off o   Leadership Development Program o   Fitness Reimbursement o   Tuition Reimbursement o   Referral Bonus Program o   Wellness Program o   Team Building Events o   Community Service Events

The Construction Manager will be responsible for administering and directing the construction project throughout the initiation, planning, execution, and closure phases.  The Construction Manager will be the main point of contact with the Client Representative for all construction related activities in the surrounding Rochester area. Duties:  Manage the pre-construction process, including schedule, budget, and quality monitoring and control. Manage the bidding process including contractor solicitation, bidding, evaluation, and selection.   Manage daily activities during the construction execution phase including the project schedule, budget, and the QA/QC process. Manage the organization, tracking, review, and disposition of various construction phase engineering and construction documents including Requests for Information (RFIs), submittals, shop drawings, and change orders. Coordinate with multidisciplinary designers, contractors, and clients to communicate project status and set priorities. Provide agenda and conduct periodic project coordination meetings. Resolve construction issues and manage risks to mitigate negative impacts to project and client. Position requires work Monday through Friday with occasional evenings and weekends, and frequent travel to project site(s). Requirements Qualifications:  Minimum 10+ years of construction management experience. Bachelor of Science in Engineering, Architecture, Construction Management or similar degree. Excellent written and verbal communication skills. Strong attention to detail with excellent analytical, multitasking, and judgment capabilities. Demonstrated ability to follow direction and work in a collaborative team environment. Proficiency in Microsoft Office Suite OSHA 30-Hour certification preferred. Current New York State Professional Engineer or Registered Architect license preferred. Construction Management (CCM, and/or PgMP, PMP) certification preferred. Experience with computer aided drafting software, proficiency in AutoCAD and REVIT preferred. Experience with Construction Management software (Primavera, Procore, RsMeans, etc.) preferred. Salary Range: $45 - $55 / Hr The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. Flexible Work Schedule Health/Dental Insurance 401k Plan with Employer Match Short & Long Term Disability Profit Sharing Paid Time Off Leadership Development Program Fitness Reimbursement Tuition Reimbursement Referral Bonus Program Wellness Program Team Building Events Community Service Events