Plumber /Handyman to install bathroom vanities

Helical Drilling, a New England based design build Geotechnical Engineering firm is looking to fill a Quality Control Technician’s role. This role would ensure that the project’s specifications are followed and that Helical Drilling’s work has been installed according to the design. They will work with the Helical Drilling (HDI) field supervisor, HDI office, the general contractor, and the project geotechnical engineer. The individual is responsible for recording accurate field and production information on a daily basis along with recognizing unknown anomalies that can affect the original design parameters. When changes or anomalies do occur, they also need to collaborate with the above mention entities on solutions and/or repairs. A successful QC Tech will ensure a project has been built correctly. Responsibilities and Duties: • Read, understand, and follow the design submittal and specifications as it relates to construction of the project. • Document and transfer to field layout plans as-builts, test pier locations, offsets, newly discovered utilities, etc. • Read and understand the boring logs. • Inform field supervisor of on-site change of conditions. • Review design submittal to verify information is accurate. • Complete accurate and timely Daily Field Reports (DFRs). • Prepare plans for field production and use. • Document and report all anomalies. • Participate in project kick off and closeout calls. • Communicate with the HDI office, GC, and/or Geotechnical engineers as directed by field supervisor. • Keep track of production and assist in sequencing of installing elements. • Introduce and be engaged with the on-site geotechnical consultants. • Calculate volume of materials needed (concrete, cement, grout, sand mix, infield mix, etc.) • Setup and preform load tests. Understand the required criteria for execution and completion of a successful test. • Record and complete all logs (drilling, driving, sheeting, grouting, test piers, installation, etc.) • Review the Quality Control Summary sheet and As- Built information at the end of a project for accuracy before submitting to the office. • Enter and record accurate information into the logs. REQUIREMENTS: • MUST HAVE: Reliable Vehicle and Valid Drivers License (We work all over New England) • 1-5 years of experience as a QC or laborer with QC experience in a fast paced construction company-Preferred • OSHA 10 Preferred • Ability to lift 50-100 lbs. • Must be able to work assigned hours with crew with some overnights • High School Diploma or GED equivalent required *Must be able to speak, read and write English and be a US Citizen ESSENTIAL KNOWLEDGE AND SKILLS * Attention to detail * Responsible attitude * Understanding of basic geometric formulas * Ability to read, interpret, and scale plans * Ability to use a tape measure for field layout * Ability to use elevation control devices * Well organized * Confident * Takes care to complete tasks fully and well * Labor as needed * Versatile BENIFITS * 100% Company Paid Health and Dental Care (Single or Family) * 3 Weeks PTO (Paid Time Off) * 9 Paid Holidays * OT After 8 Hours * Rarely Work Weekends * Paid Travel Time and Mileage * Per Diem for Overnight Travel * Paid Hotel Stays (Single Rooms) * 401 K Contribution * Continued Training and Certifications * ESOP, Employee Stock Ownership Plan Equal Opportunity Employer

Helical Drilling, is looking for an experienced Foreman. Helical is a geotechnical design build contractor that does work all over New England. The foreman is responsible for their assigned project and crew. Their primary responsibilities are to oversee and maintain a safe work environment. They will guide and direct the crew along with managing the daily activities of the project. They will ensure that the project is built according to the design submittal. They will keep General Superintendent (GS) & Construction Project Manager (CPM) informed on the status of the project daily or as needed and will also coordinate site activities with the General Contractor and with the GS & CPM when required. Primary Responsibilities 1. Responsible for the assigned project 2. Oversee and maintain a safe work environment 3. Guide and direct the crew 4. Manage daily activities on project 5. Build project according to the design submittal. 6. Keep GS & CPM informed on status of the project daily or as needed. REQUIREMENTS: • MUST HAVE: Reliable Vehicle and Valid Drivers License (We work all over New England) • 6-8 years of construction experience in a fast paced construction company and 2 plus years as a foreman running crews and jobs • OSHA 10 Preferred • Ability to lift 50-100 lbs. • Must be able to work assigned hours with crew with some overnights • High School Diploma or GED equivalent required *Must be able to speak, read and write English and be a US Citizen BENIFITS * 100% Company Paid Health and Dental Care (Single or Family) * 3 Weeks PTO (Paid Time Off) * 9 Paid Holidays * OT After 8 Hours * Rarely Work Weekends * Paid Travel Time and Mileage * Per Diem for Overnight Travel * Paid Hotel Stays (Single Rooms) * 401 K Contribution * Continued Training and Certifications * ESOP, Employee Stock Ownership Plan

Millwork Finisher – Full-Time Yellow Factory USA – Maspeth, NY Yellow Factory USA is a new and growing millwork shop located in Maspeth, NY, specializing in high-quality architectural woodworking. We are seeking a skilled, full-time Millwork Finisher with hands-on experience operating industrial finishing equipment and preparing materials for a range of custom wood products. This position is a great opportunity to join a dynamic team from the ground up and grow with the company. Health insurance is offered after a 90-day probationary period. Responsibilities: Sanding, buffing, polishing, and toning using industrial finishing machines and tools. Preparing surfaces for finishes including primer, paint, stains, and clear coats. Conducting quality inspections and performing necessary touch-ups to meet finish standards. Collaborating with production team members to ensure smooth workflow and on-time delivery. Maintaining a clean and safe work environment. Adhering to job specifications and finish standards for each project. Requirements: Proven experience with finishing in a millwork or woodworking environment. Familiarity with industrial machines used for sanding, spraying, and surface preparation. Experience with paint spraying techniques and knowledge of color mixing machines. Experience with the Cefla spray machine and drying oven is a plus. Strong attention to detail and craftsmanship. Ability to read and follow written and verbal instructions. Comfortable lifting up to 50 lbs and standing for extended periods. Good communication skills and a team-first attitude. High school diploma or equivalent preferred. Schedule: Full-time, Monday to Friday 7:30 AM – 4:15 PM Location: Maspeth, NY Benefits: Health insurance eligibility after 90-day probationary period. If you’re passionate about high-end finishing work and want to be part of building something from the ground up, we want to hear from you. To apply, please send your resume and a brief note about your experience.

We are in need of 2 experienced carpenters to install millwork on a project on Ellis Island. You must have a 40 hr SST card. This candidate should know how to install finished millwork and moldings. Possibly put together some millwork as well. You must have tools too. If you can get to Ellis Island, have tools, have the 40 SST card and are an experienced carpenter, please reply to this ad.

Thermo King Northeast currently has an opening for a full-time Refrigeration Technician at our Saugus, MA location. Below you will find our benefits, and day to day responsibilities. Feel free to reply below! Application: https://clrco.com/KswXf4Vywf What We Offer: Certification reimbursement Monday - Friday schedule (Weekends off) Promotion opportunities – we promote from within Medical & dental insurance Life insurance 401k plan with company match Flexible spending account Flexible scheduling options Paid time off Uniform & boot program Paid training Factory training Employee referral bonuses Primary Responsibilities: Performs scheduled preventive maintenance and service inspections on a variety of medium and heavy duty vehicles Performs diagnostic and repair work on all types of vehicles Follow established technical & administrative processes Complete repair orders & parts usage forms Communicate effectively with supervisor, team members & customers Remain current on technical & regulation requirements Perform road service calls as required

Contractor seeks skilled remodeler with a minimum of 10 years work experience the work is in the Lexington and surrounding areas you must be able to do a wide variety of jobs Including Carpentry and light framing Light plumbing Siding Composite decks with framing Trim replacement using pvc. interior trim Interior/exterior doors. Must have truck or van with necessary tools compensation: Starting pay 47 per hour if qualified. This is a job working for a local business who always busy summer and winter. Most work is preformed in lexington area Work requires high quality light remodeling with a large variety of jobs. Start immediately