Carpenters Wanted Meredith

Cloacina LLC manufactures Packaged Wastewater Treatment Systems for municipal and beverage industries. We are currently filling the position of Fabrication Welder Welder / Fabricator Job Duties: Reading engineer blueprints and fabricating to their specifications Cutting, grinding, fitting, and welding together stainless steel tubing, angle iron, and sheets MIG welding stainless steel tanks, with occasional TIG Lifting up to 50 lbs required Operate machinery – forklifts, scissor lift, telehandler NOTICE OF OCCUPATIONAL HAZARDS The wastewater industry can be hazardous due to exposure to biological and chemical hazards, as well as physical dangers like confined spaces, slips, and falls. Employees may come in contact with wastewater which contains human waste. Wastewater contains various bacteria, viruses, and parasites that can cause diseases in humans and animals. Workers can be exposed through contact with wastewater, aerosols containing pathogens, or contaminated equipment. Wastewater treatment processes also involve the use of various chemicals, some of which can be toxic or corrosive. It is imperative that employees wear proper Personal Protective Equipment (PPE) and follow safety protocols. While not mandatory, it is also highly recommended that employees stay current with vaccinations, including Hepatitis A, Hepatitis B, Tetanus, and Diphtheria. Clean, organize, and sort equipment and raw steel Adherence to all safety practices and procedures Personal tools ARE required for the position, lockable storage required as well such as a cart or tool box. (I.e. Basic hand and power tools, wrenches, hammers, layout tools, square, etc.) Ability to work overtime as needed Ability to work with minimal supervision All other duties as assigned We offer excellent wages and benefits. Pay Dependent on Experience. To apply for the position, please reply by email with a resume attached. NOTICE OF WORK ENVIRONMENT & OCCUPATIONAL HAZARDS: The wastewater industry can be hazardous due to exposure to biological and chemical hazards, as well as physical dangers, including but not limited to, confined spaces, slips, falls, wet and/or humid conditions, high and/or low altitude, moving mechanical parts, high and/or precarious places, fumes and/or airborne particles, outside weather conditions, extreme cold, extreme heat, risk of electrical shock, vibration, sewage, epoxy coatings, solvents, and excessive noise levels.  Employees may come in contact with wastewater which contains human waste.  Wastewater contains various bacteria, viruses, and parasites that can cause diseases in humans and animals.  Workers can be exposed through contact with wastewater, aerosols containing pathogens, or contaminated equipment.  Wastewater treatment processes also involve the use of various chemicals, some of which can be toxic or corrosive.  It is imperative that employees wear proper Personal Protective Equipment (PPE) and follow safety protocols.  While not mandatory, it is also highly recommended that employees stay current with vaccinations, including Hepatitis A, Hepatitis B, Tetanus, and Diphtheria.

We are hiring a Project Manager to oversee a 40-unit apartment renovation in Columbus, GA (Phase 1 of a 140-unit community plan). 💰 $70K base + performance bonus 📍 Columbus, GA | Start: 2025 🏗️ Growth opportunity to lead the full 140-unit renovation Responsibilities: • Manage day-to-day renovation of 40 units • Oversee subcontractors & trades (scheduling, quality, compliance) • Ensure safety, budgets, and timelines are met Requirements: • Experience with multifamily or large-scale renovations • Strong scheduling & budgeting skills • Hands-on leader with excellent communication Apply today via email or text or call Mark 410-446-6761

📢 NOW HIRING: Finish Carpenters (Temp-to-Perm Opportunity) 📍 Location: 3087 Victory Drive, Columbus, GA 31903 📞 Contact: 706-324-1780 We are seeking skilled Finish Carpenters to join our team for a Temp-to-Perm opportunity. If you have experience with finish carpentry and the ability to work independently, we want to hear from you! 💲 Pay Rate: $22–$25 per hour (based on experience) 🕒 Schedule: Monday–Friday, 8–10 hour shifts (occasional Saturdays may be required) Job Responsibilities: * Perform finish carpentry including measuring, cutting, framing, and assembly. * Read and interpret measurements with accuracy. * Install trim, moldings, and other finish carpentry elements. * Safely use hand tools, power tools, and carpentry equipment. * Work independently with little to no supervision. * Maintain a clean and safe work environment. Requirements: Must have own tools to perform job duties. Ability to read measurements and cut with precision. Must be able to climb, frame, and perform physical carpentry tasks. Reliable transportation preferred (not required). Strong work ethic and attention to detail. This is an excellent opportunity for a reliable and skilled carpenter looking for long-term employment with growth potential. 👉 To apply, call us today at 706-324-1780 or visit us at 3087 Victory Drive, Columbus, GA 31903.

Cloacina LLC manufactures Packaged Wastewater Treatment Systems for municipal and beverage industries. We are currently filling the position of Industrial Plumber Industrial Plumber Job Duties: Mount and install equipment Reading engineer blueprints and fabricating to their specifications Install, repair, replace plumbing lines and fixtures. Schedule 80 PVC, ranging from 1/2" diameter up to 12” diameter Operate machinery – forklifts, scissor lift, telehandler Lifting up to 50 lbs required Cutting, grinding, and fitting together stainless steel frames Adherence to all safety practices and procedures Clean, organize, and sort equipment and raw steel Personal tools and lockable storage may be required for the position (i.e., basic hand and power tools, wrenches, hammers, layout tools, square, etc.). Ability to work overtime as needed. Ability to work with minimal supervision. All other duties as assigned. We offer excellent wages and benefits. Pay Dependent on Experience. To apply for the position, please reply by email with a resume attached. NOTICE OF WORK ENVIRONMENT & OCCUPATIONAL HAZARDS: The wastewater industry can be hazardous due to exposure to biological and chemical hazards, as well as physical dangers, including but not limited to, confined spaces, slips, falls, wet and/or humid conditions, high and/or low altitude, moving mechanical parts, high and/or precarious places, fumes and/or airborne particles, outside weather conditions, extreme cold, extreme heat, risk of electrical shock, vibration, sewage, epoxy coatings, solvents, and excessive noise levels.  Employees may come in contact with wastewater which contains human waste.  Wastewater contains various bacteria, viruses, and parasites that can cause diseases in humans and animals.  Workers can be exposed through contact with wastewater, aerosols containing pathogens, or contaminated equipment.  Wastewater treatment processes also involve the use of various chemicals, some of which can be toxic or corrosive.  It is imperative that employees wear proper Personal Protective Equipment (PPE) and follow safety protocols.  While not mandatory, it is also highly recommended that employees stay current with vaccinations, including Hepatitis A, Hepatitis B, Tetanus, and Diphtheria.

Cloacina LLC manufactures Packaged Wastewater Treatment Systems for municipal and industrial clients. We are currently filling the position of Electrician. Electrician Job Description The electrician is responsible for installing and repairing complex electrical control and wiring systems working from a technical blueprints. Electrician Job Duties: Study and interpret assembly instructions. Listen to directions from supervisors. Fabricate and assemble wastewater/water treatment components. Determine if all parts are present. Read parts list/BOM. Verify specifications. Complete preventative maintenance. Troubleshoot malfunctions and perform repairs as needed. Ensure working environment is clean and safe. Check stock to ensure inventory is replenished. Place orders for supplies. Participate in product development. Build prototypes and test products. Installing, maintaining, and repairing electrical control, wiring, and lighting systems. Reading technical diagrams and blueprints. Performing general electrical maintenance. Inspecting transformers, circuit breakers, and other electrical components. Troubleshooting electrical issues using appropriate testing devices. Repairing and replacing equipment, electrical wiring, and fixtures. Following National Electrical Code state and local building regulations. Performing circuit breaker corrective maintenance. All other duties as assigned. Must be able to lift 50 pounds. To apply for the position, please reply by email with a resume attached. NOTICE OF WORK ENVIRONMENT & OCCUPATIONAL HAZARDS: The wastewater industry can be hazardous due to exposure to biological and chemical hazards, as well as physical dangers, including but not limited to, confined spaces, slips, falls, wet and/or humid conditions, high and/or low altitude, moving mechanical parts, high and/or precarious places, fumes and/or airborne particles, outside weather conditions, extreme cold, extreme heat, risk of electrical shock, vibration, sewage, epoxy coatings, solvents, and excessive noise levels.  Employees may come in contact with wastewater which contains human waste.  Wastewater contains various bacteria, viruses, and parasites that can cause diseases in humans and animals.  Workers can be exposed through contact with wastewater, aerosols containing pathogens, or contaminated equipment.  Wastewater treatment processes also involve the use of various chemicals, some of which can be toxic or corrosive.  It is imperative that employees wear proper Personal Protective Equipment (PPE) and follow safety protocols.  While not mandatory, it is also highly recommended that employees stay current with vaccinations, including Hepatitis A, Hepatitis B, Tetanus, and Diphtheria.

Pay: $25.00 - $30.00 per hour *********** Job Site is in San Luis Obispo ********* Job description: Motorcycle Mechanic – Full Time Pay: $25–$30 per hour Location: San Luis Obispo, CA We are seeking a skilled and motivated Motorcycle Mechanic to join our team full time. The ideal candidate will have hands-on experience with diagnostics, maintenance, and repairs across multiple brands, and a passion for precision and performance. What We’re Looking For Experience: Minimum 2 years as a motorcycle repair technician. Certification: OEM/Motorcycle Mechanics Institute (MMI) certifications preferred. Technical Skills: Proficient in diagnosing, repairing, and maintaining two-stroke and four-stroke engines, as well as electrical systems. Brand Experience: Experience with BMW, Honda, and Yamaha strongly preferred. Tools: Must provide and maintain your own basic tools. Physical Stamina: Ability to stand for extended periods and safely maneuver motorcycles weighing 800+ lbs. Attention to Detail: Strong focus on accuracy, efficiency, and quality workmanship. Computer Skills: Basic knowledge for diagnostics, service records, and parts ordering. License: Valid M1 motorcycle endorsement, at least 5 years of riding experience, and a clean driving record. Key Responsibilities Perform diagnostics, routine maintenance, and complex repairs in line with manufacturer standards. Troubleshoot and repair electrical and mechanical issues. Inspect motorcycles thoroughly and provide accurate service recommendations. Create detailed labor estimates and parts lists for each job. Clearly communicate findings and test results with the Service Manager and customers. Keep a clean, organized, and safe workspace. Conduct test rides to confirm quality and performance. Job Type: Full-time Work Location: In person