Browse
···
Log in / Register

Frame-to-Finish Carpenters and Site Leads ($25-45/hr DOE) (Seattle)

$25-45/hour

1505 6th Ave S, Seattle, WA 98134, USA

Favourites
Share

Description

Hammer & Hand is seeking experienced full-time Frame-to-Finish Carpenters, as well as Site Leads (lead carpenter and site supervisor), to join our Seattle team! Frame-to-Finish Carpenter Carpenter Qualifications • Approximately 5 years of custom carpentry experience including framing, envelope, and trim install • Experience with remodel and new build projects • Knowledgeable of materials, methods, and the tools involved in the construction of buildings and other structures • Must be able to keep accurate records and perform timekeeping, including electronic submittals • Must have reliable transportation, a valid driver’s license, and a clean driving record • Must have full selection of tools to perform the work • High level of accuracy and pride in your craft • Ability to lift 50lbs Site Lead Hammer & Hand is seeking a site lead to join its Seattle team. Successful candidates are goal-driven, organized, outside-the-box problem solvers with a keen attention to detail and the ability to manage a team and at least 10 years of experience. Site Lead Qualifications • Approximately 10 years of construction and carpentry experience • Approximately 5 years in an on-site project management role • Experience with high-end residential remodels and new build projects • Experience managing high-end commercial TI projects • Must have reliable transportation, a valid driver’s license, and a clean driving record • Must have full selection of tools to perform the work • High level of accuracy and pride in your craft • Ability to lift 50lbs • Self-motivated and able to motivate others • Well developed computer skills, including cloud based project management tools. Preferred Qualifications & Skills • Experience with cutting-edge building practices and high performance building. • Ability to use project management software. APPLY HERE: https://hammerandhand.com/careers/ No phone calls, please. Thank you for your interest! To apply, please submit an application through the link above, and we’ll be sure to reach out to you if we decide to move forward. -- About Hammer & Hand Established in 1995, Hammer & Hand is a general contractor celebrating 30 years in partnership with clients and architects in the Pacific Northwest. Our reputation is built on decades of dedication from individuals who are as passionate about their jobs as they are about their lives outside of work. Based in Portland and Seattle, our firm serves clients by empowering employees, harnessing 21st century building science, and advancing the tradition of craftsmanship. From classic remodels to design-forward commercial build-outs and high performance passive buildings, Hammer & Hand’s projects are crafted with care and built to last. We work hard to foster an atmosphere that supports our most valuable asset: our people. As such, we are proud to announce that we are on the path to 100% employee ownership. We offer a dynamic workplace, as well as a full range of benefits, including: • Competitive Industry Wages • 100% Employer Paid Medical and Dental Benefits • Optional Vision Plan • Alternative Health Care reimbursement program for chiropractic, massage, and acupuncture • 401k Retirement Savings Plan • Employee Stock Ownership Plan • Paid Time Off and Paid Holidays • Long-Term Disability Insurance • Profit Sharing • Employee Assistance Program We are always looking for the best talent to join our team and are aware that a great candidate for a job may come from a less traditional background. Studies have shown that women, LGBTQIA+ individuals, and people of color are less likely to apply for a job when they believe they may not meet all of the qualifications in a job description. We strongly encourage you to apply even if you’re not sure you meet every one of our qualifications. If you are unsure, you can contact us through our website with questions about how this would be determined. We do occasionally have openings for those looking to hone their craft and build their skillset. These are paid positions. Please do not hesitate to apply if you feel you have the aptitude to succeed with us! See more about our employment philosophy here: http://hammerandhand.com/about/employment/ Hammer & Hand is committed to equal opportunity in employment and does not discriminate based on race, color, creed, religion, sex, age, national origin, mental/physical disability, sexual orientation, gender identity/transgender status, military/veteran status, genetic information, or any other status/characteristic protected under applicable law.

Source:  craigslist View original post

Location
1505 6th Ave S, Seattle, WA 98134, USA
Show map

craigslist

You may also like

Craigslist
IMMEDIATE OPENINGS - CABLE TECHNICIANS - LA / GLENDALE / EAGLE ROCK (Los Angeles and Ventura Counties)
Precision Network Solutions, the Top Performing company in the Los Angeles and Ventura County Markets is now hiring for both entry level and experienced cable technician positions for full time employment. No Cable experience? That is not a problem!! Precision Network Solutions will provide you with full paid training. The level of training you can expect to receive from Precision Network Solutions can't be beat with our STATE OF THE ART training program. Every aspect of an installer position is fully covered in this training and our training program is unmatched by our competitors!!! Precision Network Solutions will provide to you, at no cost, all the "tools" necessary to succeed in today's cable & home automation/theatre industries. This includes uniforms, smart phone, and signal meter. If interested, we also have an excellent tool purchase program if you wish to purchase your own set of tools. At Precision Network Solutions, you also keep what you make! Unlike many of our competitors, you will not be charged back for performance errors or docked pay for such items as cell phones, uniforms and metering equipment. Your mileage is also fully reimbursed on a weekly basis. Don't get fooled by our competitors. Come work for the Top Performing Company in the Los Angeles and Ventura County Markets. The service areas we are looking to fill include the following listed and nearby surrounding areas: -Chatsworth -Simi Valley -East San Fernando Valley -All areas of Los Angeles -Glendale -Eagle Rock -Hollywood -South Bay and Surrounding Cities -Ventura and Surrounding Cities Requirements: - Provide your own truck or van with ladder rack. If you don't have a ladder rack, we can get you equipped with one. - Provide current registration and insurance - Must have a valid California Drivers License with a clean record - Ability to read, write, and communicate well in English - Ability to meet the physical demands of the job - lift/push/pull (up to 60 lbs), stand, squat, kneel, bend, crawl, climb, and sit. - Must be able to work in confined spaces (attics and crawl spaces) - Ability to use hand tools and power tools - Ability to work weekends, long hours, and endure all weather conditions both indoors and outdoors Benefits: - Full Dental, Vision and Chiropractic plans available after the first 60 days - Competitive pay scale based on monthly performance and great incentive programs - Ability to earn excellent pay based on your level of proficiency - Growth opportunities available Technician Incentives: - Prime scheduling - Enhanced tier pay for employee's reaching seniority length of service If interested in the position, you may email us with your contact info and resume by clicking Reply on our job ad. You will be contacted back to schedule an immediate interview and if qualified, you'll be immediately hired to begin training. Precision Network Solutions is an Equal Opportunity Employer.
8775 Harvard Blvd, Los Angeles, CA 90047, USA
$90,000/year
Craigslist
TIG Welder – Full-Time Position (SAN GABRIEL)
About Us: Cambero Metalworks is a small custom metal fabrication shop serving the San Gabriel community since 2003. We specialize in stainless steel fabrication while working with a wide variety of alloys. We partner with our customers to design, create, and bring their ideas to life across business, residential, commercial, industrial, and manufacturing applications. We're a close-knit team looking to grow with skilled professionals who share our commitment to quality craftsmanship. About You: • Minimum 3 years TIG welding experience • Knowledge of welding equipment • Ability to read and understand blue prints, weld symbols, and relevant information. • Familiar with welding procedures, concepts and practices. • Ability to weld light gauge stainless steel and aluminum. • Must be able to perform physical requirements of the job which includes but not limited to: o Standing, lifting, pushing and work in awkward positions. • Must be able to assemble, build and fit up metal components • Maintain a positive work atmosphere • Good written and verbal communication • Must be able to communicate effectively and professionally • Ability to work in a team • Must be able to work extra hours when required • Must be able to get to work on time Please have the appropriate tools for welding: o Welding hood o Clamps o Basic Hand Tools o Toolboxes o Measuring Tape, o Steel toe work boots Compensation & Benefits: o Starting pay: $18.50/hour (negotiable based on skills assessment and experience) o Full-time position: Monday-Friday, 6:00 AM - 2:30 PM with overtime opportunities o Paid time off (PTO) o Paid holidays o Opportunities for training and career advancement o Positive, collaborative work environment To Apply: o Please submit your resume to: virginia (@) camberometalworks (.) com Interview Process: Once an interview is scheduled, please come prepared with your welding tools for a hands-on skills assessment. Location: 210 Agostino Road, San Gabriel, CA *Cambero Metalworks is an equal opportunity employer. Applicants must be authorized to work in the United States and possess a valid driver's license. Relevant certifications (such as AWS welding certifications or OSHA safety training) are preferred but not required. This position is open until filled.
131 Agostino Rd, San Gabriel, CA 91776, USA
$18/hour
Craigslist
T-10 Automotive Technicians wanted
ASE Technicians Wanted – $33/hr + New Snap-on Tool Set – Toyota of Berkeley Toyota of Berkeley is hiring automotive technicians ready to move north or start their career with a professional, high-performing team. We’re offering top pay, full tool support, and relocation help for qualified applicants. If you’ve earned your ASEs or are completing your training, this is a place where you can grow and build your future. What We Offer $33 per hour starting pay for ASE-certified technicians Brand-new Snap-on starter tool set provided to every new hire Relocation assistance for those moving from Southern or Central California Flat rate with production bonus potential Toyota training and certification path Full benefits and consistent work volume Modern facility and strong leadership support We’re a busy Toyota dealership in Berkeley with steady year-round volume. You’ll work alongside experienced Master and L-level technicians who take pride in doing quality work and helping others advance. Requirements Valid driver’s license with clean record ASE certifications or completion of T-TEN or equivalent training program Dependable, motivated, and ready to learn If you’re ready to relocate north and join a professional environment that invests in your success, contact us today. Contact: Jason Clark Service Manager – Toyota of Berkeley 2400 Shattuck Ave, Berkeley, CA 94704 📞 (510) 982-6320 📧 jasonc@toyotaofberkeley.com Start your career with a dealership that backs its technicians from day one. Top pay, real tools, and a team that wants you to succeed.
1231 Saga St, Glendora, CA 91741, USA
$33/hour
Cookie
Cookie Settings
Our Apps
Download
Download on the
APP Store
Download
Get it on
Google Play
© 2025 Servanan International Pte. Ltd.