SETUP LATHE MACHINIST (DAY SHIFT) (IMMEDIATE HIRE) (Chatsworth, CA.)

Come work for Aero Controls, Inc.! Our Mission: Aero Controls is a proud team of professionals dedicated to providing the Aviation Industry with quality aircraft parts and services at a reasonable price to meet the customers' scheduled needs. We continuously improve in all areas through teamwork and innovation. We set the standard for vendor performance within the Aviation Industry. We provide employees a challenging, enjoyable, healthy, and productive work environment where personal and financial growth are based upon results. We provide the community a responsible corporate image, demonstrated by employee participation in local issues, community services, and environmental compliance. We provide employees and their families pride and dignity through their involvement with Aero Controls. We have lots of opportunities here at Aero Controls and are excited to grow our team. Below is a description of one of the opportunities we are looking to fill: POSITION: Technician – Electromechanical (Aviation) Status: Non-Exempt Location: Auburn, Washington Department: Electromechanical Shop (1131) Starting Hourly Pay Scale $25.00-$27.00 Overall Hourly Pay Scale $25.00-$30.36 Schedule: Monday-Friday, 5:55AM-2:30PM (40 hours/week), subject to overtime SUMMARY: This position is primarily responsible for the repair/overhaul of pneumatic/electrical operated aircraft components. The position cross-trains in other departments. The position requires the ability to read/write/understand the English language, following directions, and work in various teamwork settings. ESSENTIAL DUTIES AND RESPONSIBILITIES: • Test, disassemble, inspect, repair and reassemble aircraft components. • Work overtime and holidays on a short notice. • Follow customer’s special instructions and requirements. • Follow all company procedures and policies. • Follow all safety and security policies and regulations. • Back up department functions, cross-train in other departments and performs other duties as necessary. • Report to work on a regular and consistent basis. REQUIRED ABILITY TO: • Read and understand component maintenance/overhaul manuals. • Read and understand drawings, wiring schematics and flow diagrams. • Be a reliable self-starter. • Demonstrate the use of common hand tools. • Demonstrate the use of torque wrenches, micrometers, dial calipers and multi-meters. • Stand and work for long periods of time. • Lift, move, push and pull up to fifty (50) lbs. on a consistent basis. • Demonstrate good verbal and written communication skills in English. • Build alliances, partnerships and collaborate with co-workers in a tactful, professional and respectful manner. Be a team player with strong interpersonal skills. • Resolve workplace differences and conflict to achieve goals and objectives in a professional manner. • Foster an atmosphere of new ideas, input and creative solutions when faced with challenges. • Listen to others attentively and retain/process information effectively. • Promote a professional culture that is trustworthy, honest, and socially responsible while championing an energetic and positive work culture. REQUIRED EDUCATION/EXPERIENCE: • High School degree or equivalent. • Valid driver’s license and good driving record. • This position requires drug testing and criminal background check in accordance with FAA regulations. • Must be legally authorized to work in the United States. • 6 months + of mechanical experience. DESIRED EDUCATION/EXPERIENCE: • Airframe or Airframe and Powerplant license. • 1 year + of experience of electro-mechanical experience. WORKING CONDITIONS: • Continuous work in manufacturing/production setting. • Continuous walking and standing, and lifting, pushing and pulling heavy objects throughout the work day. • Flexibility to work long hours and occasional weekends. Why Work for Us? We offer competitive pay and benefits including: • Medical, Dental, Vision, Life and AD&D Insurance • Vacation, Personal Time Off, and Holiday Pay • Long-Term and Short-Term Disability • Flexible Spending Account (FSA) • Health Savings Account (HSA) with an employer contribution of $500 a year • 401(k) Plan with discretionary employer match • Employee Assistance Program (EAP) • Employee Discount Perks • Career growth and community involvement • Tool/Safety Shoe Reimbursement Program and mileage reimbursement for substance testing. • Day Shift and Monday through Friday schedule! Please use the link below to submit your application: https://aerocontrols.clearcompany.com/careers/jobs/fac19d9f-cb82-a357-d4e9-dcdbed341dc1/apply?source=3238408-CS-16124

All Star Labor and Staffing is hiring for Assemblers for a Dental Manufacturing company in Newberg area. Main function of position is to assemble Office Dental Supplies such as light fixtures, chairs, cabinets, metal tools and more. Must be able to use scales, hand presses, drill presses (small hand tools). Attention to details is critical. Employees must be able lift-up to 50 lbs. depending on department. Schedule/ Pay: Monday- Friday 7:00am-4:30pm/ 5:00am- 1:30pm w/ OT (Saturdays) Starting at $17.50hr CONTACT INFO: If interested, please call/text 503-619-0811 (Hablamos Espanol) Or visit our website to fill out an application at: https://hrcenter.ontempworks.com/en/ASLS/ OFFICE LOCATION: 14463 SW Pacific Hwy Tigard, OR 97224 We are open Monday- Friday 8am-5pm closed for lunch 12pm-1pm

THIS IS NOT YOUR ORDINARY PRODUCTION JOB! HOT, NOISY, TOUGH, TEAMWORK. LEARN TO WORK WITH MOLTEN GLASS: IT WILL DAZZLE YOUR FRIENDS AND TERRIFY YOUR ENEMIES! Join a 50-year legacy of supplying the world with art glass that appears in museums, cathedrals, parks, courthouses, hospitals—even the US Capitol Dome. Locally owned and operated since 1974, Bullseye Glass Co. is a growing company that has always worked shoulder-to-shoulder with artists and architects, uniting creativity and industry, inspiration and perspiration, nationwide and worldwide. Bullseye is seeking a full-time Graveyard Glass Melter. Prefer experience in an industrial environment, line cook experience helpful, ability to lift 50-80 lbs on a regular basis and interest in glass helpful. Requires ability to follow verbal and written instructions, attention to detail, and self-motivation a MUST! Job entails working near hot furnaces/molten glass. Schedule: Sunday - Thursday, 10:00pm - 6:30am. Please fill out application here: https://www.bullseyeglass.com/application-for-employment/ or email resume with "GM" on the Subject line. Check us out at: www.bullseyeglass.com or get a tour at: https://www.youtube.com/watch?v=7XNQHh7zOjw

Mechanical Assembler Little previous experience in manufacturing is required. You can do this job if you have strong general mechanical skills and a desire to learn! Our client is locally owned and operated. Established in 1949, it has grown into a regional and national industrial equipment supplier, providing a combination of value added technical services, engineering, consultation, and quality products to a variety of markets. They provide mission-critical equipment to a wide variety of industries including Fortune 500 companies. PRIMARY DUTIES: Assemble and test large industrial products from bare parts, in "job shop" and production environment. This includes mechanical connections, supports and structures, and control panels. Build custom air compressor, vacuum pump, blower, and pump assembly packages. DESIRED QUALIFICATIONS: • Some experience to build and disassemble an engine or machine • Electronic Panel Assembly experience preferred but not required • Read & interpret assembly drawings • Mechanical skills • Physically able (lifting of 50 lbs occasionally) • Work well independently/self-starter and with a team DUTIES AND RESPONSIBILITIES: Such duties include, but are not limited to: • Assemble mechanical assemblies; such as air ends, blowers, and other compressed air system components, working on a shop floor. • Inspects components for proper assembly, specifications, fit and finish. • Plans assembly and positions components according to the knowledge of unit being assembled and through the interpretation of engineering drawings, layout drawings or electrical schematics. • Remove small quantities of metal with hand files, scrapers or machine tools to produce close fit between parts. • Bend and install tubing and fittings for oil lubrication/cooling systems. • Align couplings and subassemblies to the gearbox or other components. • Operate drill presses, milling machines, lathes, hydraulic presses, welders and other shop equipment to assist in assembly operations. • Test completed assemblies for proper operation, temperature, vibration and noise levels and complete required written reports. Troubleshoot, repair or replace faulty components. • Provide feedback in regards to design improvements, updates, and procedures, verbally and in writing, as required. • Work in conjunction with Floor Supervisor to ensure assemblies meet design parameters. • Perform workstation and shop clean-up duties as assigned. EDUCATION, EXPERIENCE, SKILLS, AND KNOWLEDGE Qualifications and Requirements: • Education: High School diploma or GED preferred, but not required. • Specialized training: mechanics, electrical • Previous experience is desired but not required. It should include mechanical assembly and disassembly. Desired Skills • The ability to learn to read and use handheld mechanical measurement devices (micrometer, dial indicator, caliper) as well as electrical measurement devices (Fluke meter). • Recognize common mechanical and electrical components • Passion for auto mechanics, building and/or tinkering with mechanical components • Excellent communication skills • Must work well with others in a safe and self-directed manner • Reading: Read and interpret the following documents: operating and maintenance manuals, employee manuals, safety guidelines, electrical schematics, blueprints, mechanical sketches, and electrical and mechanical reference charts. Day Shift: 5:00 am to 1:30 pm **Not public transportation accessible** Pay rate: $21.00/hr to start! Email us at portlandwest@pridestaff.com Or Call Today to Apply! 971.371.4028 And Walk-ins are welcome Monday to Friday from 9:00 am to 3:30 pm. 12600 SW Crescent Street Beaverton, OR 97005 PrideStaff Portland is a locally owned and operated Staffing Agency. PrideStaff is a winner of the coveted "Best of Staffing" Diamond award for 15 consecutive years for the highest level of satisfaction as rated by our valued Employees and Clients. Over the years, PrideStaff has been a consistent industry leader, developing technology and service processes that allow our organization to deliver superior performance. When it comes to your success, we leave nothing to chance. Let us support your job and career search and see the difference PrideStaff can make!

Subject: 🚨 Immediate Openings at Pacific NW Beverage Company! | Temp-to-Hire Forklift, Sanitation ,Dock Workers & Production Roles Are you ready to join a cornerstone of the Pacific Northwest beverage industry? CSR Personnel is actively recruiting for several exciting temp-to-hire positions with the Clackamas Distribution Company. This leading, 24/7 co-packer committed to quality and innovation, utilizing state-of-the-art equipment. If you are dependable and have a passion for efficiency, we want to hear from you immediately! Current Open Positions (Clackamas, OR) We offer competitive wages and a $2.00 per hour shift differential for all hours worked between 7:00 PM and 5:00 AM. Position Wage Schedule Details Forklift Driver (Line) $21.00/hour + differential 6:00 PM – 6:30 AM (2-2-3 rotation) Night Shift Forklift Driver (Dock) $21.00/hour Schedule 1: Friday – Tuesday, 6:00 AM – 2:30 PM Day Shift Forklift Driver (Dock) $21.00/hour Schedule 2: Wednesday – Sunday, 6:00 AM – 2:30 PM Day Shift Production Tech $21.00/hour + differential 6:00 PM – 6:30 AM (2-2-3 rotation) Night Shift Sanitation Tech $19.00/hour Schedule 1: Wednesday – Saturday, 5:00 AM – 3:30 PM Day Shift Sanitation Tech $19.00/hour Schedule 2: Monday – Friday, 12:00 PM – 8:30 PM Day Shift Next Steps: These positions are filling quickly! If you are interested in joining this Clackamas Bottling team, please reply to this email immediately with your current resume, including dates of employment. We look forward to connecting you with this great opportunity! Best regards, Jacquie Bartow CSR Personnel 347 NE Hood Ave. Gresham, OR 97030 Office: 503-665-7790

NOW HIRING: Machine Operator – Food Production (McMinnville, OR) 🚨 All Star Labor & Staffing is currently hiring Machine Operators for a fast-paced Food Production Company in the McMinnville area. If you have a strong mechanical aptitude, attention to detail, and thrive in a team-driven environment – we want to hear from you! 💼 Responsibilities: • Operate and monitor food production machinery safely and efficiently • Set up machines for production runs and ensure proper calibration • Perform routine equipment maintenance and troubleshooting • Document machine settings, output, and any production deviations • Follow strict safety and quality protocols at all times 🔧 Requirements: • Ability to read technical manuals and production documents • Strong mechanical and troubleshooting skills • Detail-oriented with a focus on product quality • Excellent communication and teamwork skills • Ability to work in a fast-paced, physically demanding environment • Flexible with schedule and open to overtime • Commitment to safety and compliance 💪 Physical Requirements: • Frequent walking, bending, stooping, and lifting (up to 70 lbs) • Use of hands/arms for repetitive tasks • Occasional kneeling, climbing, and working at heights • Ability to operate dolly/forklift to move full drums of chemicals 🕒 Schedule & Pay: Day Shift: $20.63/hr Graveyard Shift: $23.13/hr (includes $2.50 night differential) Rotating Shifts: Shift 1: Sun – Every Other Wed | 4am – 4pm Shift 2: Sun – Every Other Wed | 4pm – 4am Shift 3: Every Other Wed – Sat | 4am – 4pm Shift 4: Every Other Wed – Sat | 4pm – 4am 🎯 Perks Once Hired On: • Medical, Dental, Vision, and Voluntary Benefits • 401(k) with 3% Employer Contribution • 40 Hours of Sick Pay • Vacation Pay (Up to 120 hours per year based on tenure) If you are interested, please Call/ Text 503-619-0811