Entry Level Production Assistant (San Fernando)

Come work for Aero Controls, Inc.! Our Mission: Aero Controls is a proud team of professionals dedicated to providing the Aviation Industry with quality aircraft parts and services at a reasonable price to meet the customers' scheduled needs. We continuously improve in all areas through teamwork and innovation. We set the standard for vendor performance within the Aviation Industry. We provide employees a challenging, enjoyable, healthy, and productive work environment where personal and financial growth are based upon results. We provide the community a responsible corporate image, demonstrated by employee participation in local issues, community services, and environmental compliance. We provide employees and their families pride and dignity through their involvement with Aero Controls. We have lots of opportunities here at Aero Controls and are excited to grow our team. Below is a description of one of the opportunities we are looking to fill: POSITION: Technician – Electromechanical (Aviation) Status: Non-Exempt Location: Auburn, Washington Department: Electromechanical Shop (1131) Starting Hourly Pay Scale $25.00-$27.00 Overall Hourly Pay Scale $25.00-$30.36 Schedule: Monday-Friday, 5:55AM-2:30PM (40 hours/week), subject to overtime SUMMARY: This position is primarily responsible for the repair/overhaul of pneumatic/electrical operated aircraft components. The position cross-trains in other departments. The position requires the ability to read/write/understand the English language, following directions, and work in various teamwork settings. ESSENTIAL DUTIES AND RESPONSIBILITIES: • Test, disassemble, inspect, repair and reassemble aircraft components. • Work overtime and holidays on a short notice. • Follow customer’s special instructions and requirements. • Follow all company procedures and policies. • Follow all safety and security policies and regulations. • Back up department functions, cross-train in other departments and performs other duties as necessary. • Report to work on a regular and consistent basis. REQUIRED ABILITY TO: • Read and understand component maintenance/overhaul manuals. • Read and understand drawings, wiring schematics and flow diagrams. • Be a reliable self-starter. • Demonstrate the use of common hand tools. • Demonstrate the use of torque wrenches, micrometers, dial calipers and multi-meters. • Stand and work for long periods of time. • Lift, move, push and pull up to fifty (50) lbs. on a consistent basis. • Demonstrate good verbal and written communication skills in English. • Build alliances, partnerships and collaborate with co-workers in a tactful, professional and respectful manner. Be a team player with strong interpersonal skills. • Resolve workplace differences and conflict to achieve goals and objectives in a professional manner. • Foster an atmosphere of new ideas, input and creative solutions when faced with challenges. • Listen to others attentively and retain/process information effectively. • Promote a professional culture that is trustworthy, honest, and socially responsible while championing an energetic and positive work culture. REQUIRED EDUCATION/EXPERIENCE: • High School degree or equivalent. • Valid driver’s license and good driving record. • This position requires drug testing and criminal background check in accordance with FAA regulations. • Must be legally authorized to work in the United States. • 6 months + of mechanical experience. DESIRED EDUCATION/EXPERIENCE: • Airframe or Airframe and Powerplant license. • 1 year + of experience of electro-mechanical experience. WORKING CONDITIONS: • Continuous work in manufacturing/production setting. • Continuous walking and standing, and lifting, pushing and pulling heavy objects throughout the work day. • Flexibility to work long hours and occasional weekends. Why Work for Us? We offer competitive pay and benefits including: • Medical, Dental, Vision, Life and AD&D Insurance • Vacation, Personal Time Off, and Holiday Pay • Long-Term and Short-Term Disability • Flexible Spending Account (FSA) • Health Savings Account (HSA) with an employer contribution of $500 a year • 401(k) Plan with discretionary employer match • Employee Assistance Program (EAP) • Employee Discount Perks • Career growth and community involvement • Tool/Safety Shoe Reimbursement Program and mileage reimbursement for substance testing. • Day Shift and Monday through Friday schedule! Please use the link below to submit your application: https://aerocontrols.clearcompany.com/careers/jobs/fac19d9f-cb82-a357-d4e9-dcdbed341dc1/apply?source=3238408-CS-16124

Eastridge Workforce Solutions is now hiring for Manufacting Techs in the Poway area. Location: El Cajon, CA Shift: 1st Shift Pay Rate: $21/hr *Please simply respond to this advertisement with your resume *I will then reach out to set up a time to chat Position Summary: The Forklift Yard Worker is responsible for safely operating forklifts and performing general labor duties in an outdoor yard environment. This position involves loading and unloading materials, organizing inventory, maintaining a clean yard area, and assisting with daily logistics. Key Responsibilities: *Operate sit-down or stand-up forklifts to move, load, and unload materials in the yard *Stage products and materials according to instructions from supervisors or dispatch *Assist with loading and securing materials onto flatbeds, trailers, or trucks *Maintain yard organization, including stacking pallets, sorting materials, and clearing debris *Perform visual inspections of equipment and report any safety or maintenance concerns *Assist customers, drivers, or team members with material pickups and deliveries *Follow all safety procedures and wear required PPE at all times Qualifications: *1+ year of recent forklift experience (outdoor or yard setting preferred) *Valid forklift certification (or ability to obtain through employer) *Ability to lift up to 50 lbs and work on your feet throughout the shift *Comfortable working in all weather conditions (heat, cold, wind, etc.) *Strong attention to safety and teamwork Work Environment: *Outdoor yard or warehouse yard setting *Exposure to dust, dirt, noise, and varying weather conditions *Fast-paced and physically active work environment *Please simply respond to this advertisement with your resume *I will then reach out to set up a time to chat Eastridge Workforce Solutions is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. We celebrate diversity and are committed to creating an inclusive environment for all employees. Please note that Eastridge is unable to provide visa sponsorship to applicants.

Batching Assistant Van Nuys, CA Full time Temp to hire Monday thru Friday - 6am to 2:30pm $19hr to $21hr depending on experience. A fast-growing company passionate about creating fresh, high-quality health and wellness beverages is seeking a motivated Batching Assistant to join their team in Van Nuys. Summary: Working as part of the Manufacturing & Operations team and under the supervision of the Chief Batching Officer, the Batching Assistant will operate equipment that blends raw materials to create food and beverage products by weighing, measuring, and mixing ingredients to client specifications. As needed, the Batching Assistant will also cross-train as a Production Support to operate and/or assist with production lines, including but not limited to the high-speed canning/beverage production line, the bottle filling production line, powder flavor-making production line, and labeling line to create, produce and package products while working on a team. Responsibilities: • Assist, provides support, and/or carries out: Precisely stages kits and verifies physical ingredients to match the ingredients on batch sheets according to the product recipes. • Collaborate with Quality Compliance Technician on the analytical results and makes modifications or adjustments to the batches when needed (i.e. Brix, Acid, pH, color). • Ensure resulting mixture meets specified consistencies and requirements; Report any urgent quality, food safety incidents, or deviations immediately to Chief Batching Officer or Quality team for investigation and resolution. • Accurately weighing or measuring all ingredients per formulation. • Accurately documents lot numbers, quantities, and expiration dates on formulas per customer regulations. Quality • Perform set-up of batching area, including tools and equipment needed. • Perform physical inventory of materials before and after production and document • Communicate any ingredient availability or ingredient quality issues immediately to the Processing Supervisor. • Perform cleaning and sanitation of batching equipment and fillers (CIP’s, foaming equipment and hand brushing). • Properly clean and seal all ingredient containers prior to returning to the proper ingredient storage areas. • Adhere to all food safety policies and procedures. • Operate forklift to load/move various ingredients, following all safety procedures. • Maintain general housekeeping and quality in all areas of batching, production, and any additional areas. • Accurately completes inspection sheets based on overall product quality. • Provide status report during shift handoff (batches produced, quality and results of batching) • Must have proficient knowledge of the batching flow to production. • Report non-compliance and food safety issues to management. • Ability to stand or walk for extended periods of time in a manufacturing environment. • Ability to regularly lift and/or move up to 50 pounds and frequently lift and/or move up to 50 pounds, must use appropriate means to accomplish this, using pallet jack and/or forklift, as necessary. • Ability to visually inspect products and materials. Qualifications: • A high school diploma or equivalent. • 1-2 years prior experience in batching in food and beverage industry. • Able to be physically active for the duration of the workday. • Forklift experience.

Please apply at: https://secure7.saashr.com/ta/6206871.careers?CareersSearch=&lang=en-US Summary: Leads Injection Molding and Automation (IM&A) team members on required tasks, work orders, and daily 5S upkeep with all IM&A processes.  Performs and trains team on machine set-up, in-process production quality inspections, machine tear down, troubleshooting, maintenance, and workflow. DUTIES and RESPONSIBILITIES •           Directs production Work Order execution with prioritization from Production Manager, coordinates supporting equipment setup and line clearance operations, and team activities for equipment preventative maintenance. •           Participates in Production Planning meetings to provide Work Order execution status and scheduling updates. •           Participates hands-on in IM&A activities including work order execution, process equipment setup and shut down operations, mold/material/tooling changes, troubleshooting, equipment maintenance, and required quality assurance activities. •           Sustains on-going training and development of IM&A team members on all injection molding and machine automation processes, along with required quality assurance inspections to confirm production parts meet LEMO quality standards and dimensional requirements per drawings. •           Monitors processes at start up, production, and shut down to ensure the proper operation of injection molding and over-molding machines, automated pin insertion machines, and other IM&A work area process equipment. •           Collaborates with Engineering and Quality to investigate root causes of molding and secondary operation issues; helps with implementing corrective actions and process control plans. •           Provides input and participates in continuous improvement projects on cycle time reduction, process and machine up-time improvements, and scrap/waste reduction •           Follows all policies and work rules including but not limited to safety, 5S (housekeeping), Lean Manufacturing practices and quality systems •           Assists with new mold samples, verifies that process parameters are set per the process qualification documentation, collects and provides requested documentation of results. •           Other duties as assigned See job posting for more specific details and job qualifications. Company Overview: LEMO is a privately owned Swiss company, located in Sonoma County among the rolling hills of Northern California's wine county, centrally located just 45 minutes north of San Francisco. LEMO is a global leader in the design and manufacture of precision custom connection solutions since 1946. Providing high-quality push-pull connectors that can be found in a variety of challenging application environments including medical, industrial control, test and measurement, broadcast/audio/video, and telecommunications. LEMO also provides cable assembly services, prototyping and custom designs. LEMO requires an uncompromising commitment to QUALITY, EXCELLENCE, and INNOVATION. As such, we encourage and invest in each employee to promote responsibility, personal growth, and integrity. LEMO is an Equal Opportunity Employer

Leading designer and manufacturer of innovative interconnect products and complex cable assemblies has an immediate opening for a Tester with Soldering skills. Duties/Responsibilities: • Checks Customer Specification Sheet (CSS) to determine required assembly, exterior finish on product, and any special options. • Uses various machines and hand tools to accomplish assigned tasks. • Maintains logs, records, and reports concerning production, machine maintenance, and product inconsistencies. • May do one or more of these functions: solder; assembly of components into sets or sub-assemblies; crimping; electrical testing; pull-testing; stripping machines; • Perform functional testing to ensure assembled products meet quality standards • Reports other problems to line supervisor or quality control inspector for assistance. • Reporting of quantity and in process inspection on traveler as required. • Solder components with precision and care following safety procedures. • Safely lift and carry materials and finished products weighing up to 50 lbs. • Maintains clean and safe working environment in line with company policies. • Follow all safety protocols and company policies. • Performs other related duties as assigned. Required Skills/Abilities: • Detail-oriented and consistent. • Previous experience in assembly, soldering and testing. • Ability to use soldering equipment and testing tools effectively. • Works well as a productive member of a team. • Experience in intricate hand assembly on paced assembly line depending on whether entry-level or more senior assembly position. • Knowledge of hand and automated tools; soldering irons and soldering tools. • Use of electrical meters; pc based automated electrical test equipment and high potential low amperage equipment, hand presses. Education and Experience: • High school diploma or equivalent required. Physical Requirements: • Prolonged periods standing and performing repetitive tasks. • Must be able to lift up to 50 pounds at a time. • Must have manual dexterity in order to assemble products or machines as directed. • Must have excellent hand-eye coordination. • Ability to differentiate between colored wires, tabs, and electronic components. • Must wear gloves and eye protection when required. Qualified candidates please submit your resume for immediate consideration.

We are currently looking for a Customer Service Representative to add to our growing team! We are a leading manufacturing of high- quality HVAC coils and components. This role will be responsible for upholding our excellent customer service standards and fostering relationships with our client base located across the country. We are looking for a passionate and energizing individual who is able to advocate for our customers and become a subject matter expert in the industry. This role requires excellent communication skills, attention to detail and the ability to thrive in fast-paced manufacturing environment. Responsibilities: • Handle inbound and customer inquiries via phone and email. • Receive, review and evaluate customer quotations and understand the scope of work. • Accurately prepare and submit sales order; review all orders and revisions for completeness • Support daily operation activities of the sales and customer service department. Requirements: • 2+ years of experience in customer service, preferably in a manufacturing or industrial environment. • Strong verbal and written communication skills, • Proficient in Microsoft Office ( Word, outlook, and Excel ) • Experience in QuickBooks preferred • Strong organizational skills and attention to detail. • Ability to multitask prioritizes responsibilities and work effectively in a team setting. Schedule & Pay: Starting Pay: $22-24/HR DOE Schedule: Monday – Friday Shift: 1st / 8AM-4:30PM Call for more details: (323) 532-3984 Please submit your resume to be considered