Conventional Machinist with Manual Mill and Lathe Experience (Northeast San Fernando Valley)

Come work for Aero Controls, Inc.! Our Mission: Aero Controls is a proud team of professionals dedicated to providing the Aviation Industry with quality aircraft parts and services at a reasonable price to meet the customers' scheduled needs. We continuously improve in all areas through teamwork and innovation. We set the standard for vendor performance within the Aviation Industry. We provide employees a challenging, enjoyable, healthy, and productive work environment where personal and financial growth are based upon results. We provide the community a responsible corporate image, demonstrated by employee participation in local issues, community services, and environmental compliance. We provide employees and their families pride and dignity through their involvement with Aero Controls. We have lots of opportunities here at Aero Controls and are excited to grow our team. Below is a description of one of the opportunities we are looking to fill: POSITION: Technician – Electromechanical (Aviation) Status: Non-Exempt Location: Auburn, Washington Department: Electromechanical Shop (1131) Starting Hourly Pay Scale $25.00-$27.00 Overall Hourly Pay Scale $25.00-$30.36 Schedule: Monday-Friday, 5:55AM-2:30PM (40 hours/week), subject to overtime SUMMARY: This position is primarily responsible for the repair/overhaul of pneumatic/electrical operated aircraft components. The position cross-trains in other departments. The position requires the ability to read/write/understand the English language, following directions, and work in various teamwork settings. ESSENTIAL DUTIES AND RESPONSIBILITIES: • Test, disassemble, inspect, repair and reassemble aircraft components. • Work overtime and holidays on a short notice. • Follow customer’s special instructions and requirements. • Follow all company procedures and policies. • Follow all safety and security policies and regulations. • Back up department functions, cross-train in other departments and performs other duties as necessary. • Report to work on a regular and consistent basis. REQUIRED ABILITY TO: • Read and understand component maintenance/overhaul manuals. • Read and understand drawings, wiring schematics and flow diagrams. • Be a reliable self-starter. • Demonstrate the use of common hand tools. • Demonstrate the use of torque wrenches, micrometers, dial calipers and multi-meters. • Stand and work for long periods of time. • Lift, move, push and pull up to fifty (50) lbs. on a consistent basis. • Demonstrate good verbal and written communication skills in English. • Build alliances, partnerships and collaborate with co-workers in a tactful, professional and respectful manner. Be a team player with strong interpersonal skills. • Resolve workplace differences and conflict to achieve goals and objectives in a professional manner. • Foster an atmosphere of new ideas, input and creative solutions when faced with challenges. • Listen to others attentively and retain/process information effectively. • Promote a professional culture that is trustworthy, honest, and socially responsible while championing an energetic and positive work culture. REQUIRED EDUCATION/EXPERIENCE: • High School degree or equivalent. • Valid driver’s license and good driving record. • This position requires drug testing and criminal background check in accordance with FAA regulations. • Must be legally authorized to work in the United States. • 6 months + of mechanical experience. DESIRED EDUCATION/EXPERIENCE: • Airframe or Airframe and Powerplant license. • 1 year + of experience of electro-mechanical experience. WORKING CONDITIONS: • Continuous work in manufacturing/production setting. • Continuous walking and standing, and lifting, pushing and pulling heavy objects throughout the work day. • Flexibility to work long hours and occasional weekends. Why Work for Us? We offer competitive pay and benefits including: • Medical, Dental, Vision, Life and AD&D Insurance • Vacation, Personal Time Off, and Holiday Pay • Long-Term and Short-Term Disability • Flexible Spending Account (FSA) • Health Savings Account (HSA) with an employer contribution of $500 a year • 401(k) Plan with discretionary employer match • Employee Assistance Program (EAP) • Employee Discount Perks • Career growth and community involvement • Tool/Safety Shoe Reimbursement Program and mileage reimbursement for substance testing. • Day Shift and Monday through Friday schedule! Please use the link below to submit your application: https://aerocontrols.clearcompany.com/careers/jobs/fac19d9f-cb82-a357-d4e9-dcdbed341dc1/apply?source=3238408-CS-16124

Please apply at: https://secure7.saashr.com/ta/6206871.careers?CareersSearch=&lang=en-US Summary: Leads Injection Molding and Automation (IM&A) team members on required tasks, work orders, and daily 5S upkeep with all IM&A processes.  Performs and trains team on machine set-up, in-process production quality inspections, machine tear down, troubleshooting, maintenance, and workflow. DUTIES and RESPONSIBILITIES •           Directs production Work Order execution with prioritization from Production Manager, coordinates supporting equipment setup and line clearance operations, and team activities for equipment preventative maintenance. •           Participates in Production Planning meetings to provide Work Order execution status and scheduling updates. •           Participates hands-on in IM&A activities including work order execution, process equipment setup and shut down operations, mold/material/tooling changes, troubleshooting, equipment maintenance, and required quality assurance activities. •           Sustains on-going training and development of IM&A team members on all injection molding and machine automation processes, along with required quality assurance inspections to confirm production parts meet LEMO quality standards and dimensional requirements per drawings. •           Monitors processes at start up, production, and shut down to ensure the proper operation of injection molding and over-molding machines, automated pin insertion machines, and other IM&A work area process equipment. •           Collaborates with Engineering and Quality to investigate root causes of molding and secondary operation issues; helps with implementing corrective actions and process control plans. •           Provides input and participates in continuous improvement projects on cycle time reduction, process and machine up-time improvements, and scrap/waste reduction •           Follows all policies and work rules including but not limited to safety, 5S (housekeeping), Lean Manufacturing practices and quality systems •           Assists with new mold samples, verifies that process parameters are set per the process qualification documentation, collects and provides requested documentation of results. •           Other duties as assigned See job posting for more specific details and job qualifications. Company Overview: LEMO is a privately owned Swiss company, located in Sonoma County among the rolling hills of Northern California's wine county, centrally located just 45 minutes north of San Francisco. LEMO is a global leader in the design and manufacture of precision custom connection solutions since 1946. Providing high-quality push-pull connectors that can be found in a variety of challenging application environments including medical, industrial control, test and measurement, broadcast/audio/video, and telecommunications. LEMO also provides cable assembly services, prototyping and custom designs. LEMO requires an uncompromising commitment to QUALITY, EXCELLENCE, and INNOVATION. As such, we encourage and invest in each employee to promote responsibility, personal growth, and integrity. LEMO is an Equal Opportunity Employer

A&R Engineering has multiple openings for 2nd Shift Mechanical Assemblers for Aerospace and Defense components. - candidate must be capable of reading and understanding written and verbal instructions in English - candidate must be either as U.S. Citizen or permanent resident - candidate must have completed High School or GED as a minimum - Good manual dexterity is a must - Capable of lifting 15- 20 pounds - Training is available - Experience utilizing mechanical and pneumatic presses for riveting and staking is a plus - Experience utilizing automated identification equipment is a plus - Experience using basic measuring tools is a plus (i.e. - calipers, micrometers, vision systems) Principals only. Recruiters, please don't contact this job poster.

Looking for welder cleaner to add to our growing manufacturing team, experience require •Following and enforcing strict safety regulations such as wearing gloves , protective glasses, steel toe shows is a must for your on safety. •Cleaning stainless and aluminum fabricated items. •Inspecting all work for defects, dimension, alignment, preparation, and reporting discrepancies •Ensuring quality of finished products •Operating and maintaining shop hand tools and equipment, including tape measures, chisels grinders, files, demurring machines, notching machines, and press brakes. •processing incoming materials ordered. Benefits offered after 90 days

Starting Rate $18.22 - higher rate with more experience. This Assembler Position uses basic hand tools to assemble various components in manufacturing. We will provide on-the-job training to the right candidate. ControlAir is an established company with 35 years in the business. We have very low employee turnover, which is a testament to our exceptional culture and a clean, climate-controlled work environment. Candidates must be US citizens, 18 years and older. Candidates must be fluent in reading, writing, and speaking English.

Mandrel Tube Bender Van Nuys, CA Full time - Temp to hire 4x10s: Monday Thru Thursday - 6am to 4:30pm $25hr to start Designer and manufacture of Aircraft Ground Support Equipment, fabricated in-house from start to finish, with savvy and attention to detail producing some of the industry’s most innovative products is seeking a Mandrel Tube Bender to join their team in Van Nuys. Summary: Seeking a skilled Mandrel Tube Bender to join our growing team in Van Nuys. This role is critical to our fabrication process, ensuring that all tubing components meet our exacting standards for quality and performance. The ideal candidate will have hands-on experience operating mandrel tube bending equipment and a strong eye for detail. Responsibilities: • Operate mandrel tube bending machines to produce high-quality tubing components. • Read and interpret blueprints, technical drawings, and work orders. • Inspect finished parts for accuracy, quality, and compliance with specifications. • Maintain equipment, perform basic troubleshooting, and report any issues. • Work closely with the fabrication team to ensure smooth production flow. • Uphold a clean, organized, and safe work environment. Qualifications: • Previous experience operating mandrel tube bending machines (preferred). • Ability to read and interpret technical drawings and measurements. • Strong attention to detail and commitment to quality workmanship. • Ability to work independently and as part of a team. • Familiarity with aircraft ground support equipment manufacturing is a plus.