Browse
···
Log in / Register

Epoxy / Flake / Polyaspartic / Garage Floor Installer – Helper Wanted (Marietta)

Negotiable Salary

991 Canton Rd NE, Marietta, GA 30060, USA

Favourites
Share
Description

We are a decorative concrete coatings company in Marietta, Ga near the Big Chicken. We mainly do garage floors. Some patios and pool decks. We’re looking for a motivated installer/helper to join our team. Job Duties Include: Mixing and applying epoxy, flakes, and polyaspartic topcoats. Polyurea experience is a plus. Operating a 22" planetary grinder and 7" hand-held cup wheel for prep and edge work Properly treating cracks, divots, and repairs before coating Scraping/vacuuming flakes and assisting with topcoat application General jobsite and shop support (loading materials, cleanup, etc.) Qualifications: Experience in coatings, flooring, or construction trades a plus (will train the right person) Able to lift 30+ lbs and work on your feet. Not hard work but it will keep you moving. No ladders, we are on the ground :) Valid Drivers License and your own transportation to the shop, no exceptions. Strong work ethic, attention to detail, and willingness to learn Keep the drama at home. BE ON TIME What We Offer: Competitive pay (based on experience) Opportunity to learn a specialty trade and grow with our company Opportunity to run your own crew with our equipment and partner jobs. Work with modern equipment, branded setup, and organized operations If you have experience in skilled trades/artisan work, flooring, painting, or construction, this could be a great fit. 📩 CALL 404-590-6633 and leave your name, a brief description of your work experience, where you live, your number, and when you are best available for a phone interview. We look forward to hearing from you! Texts and emails will be ignored.

Source:  craigslist View original post
Location
991 Canton Rd NE, Marietta, GA 30060, USA
Show map
craigslist

You may also like

Craigslist
Heavy Equipment Operators/ Entry level laborers/ CDL Drivers (Idaho, Oregon, Washington)
DeAtley Crushing Service is currently interviewing for heavy equipment operators and entry level laborers to join our team. We are looking for career minded people capable of working long hours and are able to travel around the Northwest and are eager to face the day to day demands of our rock crushing industry. All of our employees provide their own RV's to live in while on the road away from home. This is a 100% travel job, and people best suited for this work are ones who don't mind living in an RV and exploring the Northwest and all it has to offer. We do not have seasonal layoffs so applicants must be able to work in all weather conditions. We welcome applicants with prior equipment experience, but we highly value attitude, work ethic, and desire to learn and so we welcome applicants who exemplify our values but have no experience in this kind of work. We have a very competitive salary and benefits package that includes: Paid Per Diem when over 50 miles away from tax home Medical, Dental, Vision, and Life Insurance for the Employee and His / Her Family at NO COST to the Employee 401k with 6 % match on total gross earnings Roth IRA Seven Paid Holidays Paid Vacations Please go to deatleycrushinghiring.com to fill out an application and learn more about our great company and what we have to offer.
6443+QF Waha, ID, USA
$29-30/hour
Craigslist
CNC Machinist/Programmer
HardHat is currently interviewing for a long-term position for an experienced CNC Machinist/Programmer- this position is located in Cocoa Beach, Florida. Pay is up to $35/hour Federal Background and US Citizenship is required This position requires enthusiasm to learn & requires excellent work ethic. Basic Qualifications: 3+ years programming CNC Machines & reading G-Code CNC Mills or Lathe experience-at least 3+ years hands on experience High School Diploma or Equivalency Certificate Federal Background check is required Preferred Skills: Mastercam 2019+ experience Fanuc, Hurco & Haas machine tool controls Renishaw probe experience Proficiency with precision measurement tools Lathe, knee mill experience as well as other machinery Job Scope- not limited to the following: Complete machining operations from drawings, blueprints, verbal & written instructions Operate, setup & prove out programs on equipment such as CNC Lathe, manual Mill/lathe & other equipment Program & machine high precision, quickturn & reoccuring production jobs with the same attention to detail Enforce clients procedures, processes & safety culture while working collaboratively across several teams with a team mentality at all times HardHat offers direct deposit, weekly pay, health benefits, 401K as well as other great benefits. Please call/text our office at 713.487.6911 to speak with us regarding this position. "All estimates of project are mere estimates and not representative of a guaranteed period of employment. HardHat is always subject to our clients termination of a project or assignment."
127 Adams Ave, Cape Canaveral, FL 32920, USA
$35/hour
Craigslist
Equipment Operator (Colorado area)
We are Looking for motivated individuals for Busy company. We are looking for Equipment Operator that can dig Basement's, also looking for individual to do backfill and Final grades for residential projects. Must be able to read grade and prints. 40 hours week. Must have reliable transportation. Pay is bi-weekly. Please call or Text to set up an interview.
13920 I-76, Brighton, CO 80603, USA
$25/hour
Craigslist
STUCCO/PLASTER WORK (Boulder)
Looking for a couple of experienced plasterers to help right away with re-finish on a large house in Boulder. More work scheduled after this job. Must have at least a few years in the trade. Must have own reliable transportation and some tools. Bilingual a big plus! Small crew, friendly environment. We do mostly custom homes, repair work etc. We do hard-coat and EIFS and some interior plastering on occasion. Looking for responsible people with positive attitudes, who take pride in their work. Please reply to this message with information about your experience, when you can start, how many years in the trade etc. You can also text or leave a message at 970-290-5373.
28th St & Valmont Rd, Boulder, CO, USA
$22-26/hour
Craigslist
Cabinet Builder and Solid Surface Fabricator (Arvada)
Unique Millwork Cabinetry and Countertops is seeking a skilled individual(s) with knowledge in cabinet building and solid surface fabrication, with a motivation to produce quickly and with quality. We are located in Arvada at 52nd and Marshall. This shop has been around for over 30 years and under new management for the last 4 years. We continue to grow the business and need additional personnel to meet the demands. This is a full-time position. We have a separate installation crew and a majority of the work will be in the shop. Requirements: Your own transportation and hand/power/pneumatic tools are required as in field installation may be required at times. Millwork saws, edge-bander and glue applicators are supplied by the shop for use in the shop. We do a multitude of different projects to include laminate counters, cabinet building and installation, solid surface fabrication and installation, various millwork fabrication and installation for low-income housing complexes, private residential, multi-family complexes and commercial applications. We are branching out into new builds as well. Job Duties will include but not limited to: -Fabrication of solid surface -New cabinet builds and cabinet rebuilds -Cabinet door/drawer/drawer fronts/faux front fabrication -Laminate countertop fabrication. -Shop cleanliness and organization Starting pay will be $26-$29 an hour depending on knowledge/skill. Benefit options, holiday paid days and sick leave accrual.
5367 Field Cir, Arvada, CO 80002, USA
$26-30/hour
Craigslist
Construction/Installer/General Laborer
***Must be able to meet the I-9 Requirements and have two valid forms of ID Summary Construction workers, laborers, installers and skilled carpenters from any trade or background strongly encouraged to apply. Our work is mostly in the Denver Metro/Front Range Areas, we do some out of town work as well. Some Qualifications are but not limited to: Must have Tools Valid driver's license with a copy of current MVR Reliable transportation and proof of insurance Meets I-9 Requirements Trustworthy Ethical Reliable Has proven construction work history Must be able to pass a background check. Must be able to pass a drug screen *Send work history *Pay is DOE **Open to Colorado Applicants Only - **This is a full-time, permanent position, not seasonal Direct for Employer -W2 Work Job Type: Full-time Benefits: 401(k) Dental insurance Health insurance Paid time off Vision insurance
1028 N Marion St, Denver, CO 80218, USA
$20-30/hour
About Us
Terms of Use
Privacy Policy
Help
Contact Us
FAQ
Cookie
Cookie Policy
Cookie Settings
Our Apps
Download
Download on the
APP Store
Download
Get it on
Google Play
© 2025 Servanan International Pte. Ltd.