CDL-A Owner Ops - Home Daily!! (Jacksonville, FL)

Position summary: Operate CNC press brake and laser cutting equipment, in both a prototyping and production capacity. Conduct “job shop” sheet metal work to fulfill new or existing production orders, on a recurring and repeat basis, according to required delivery schedules. In addition to production work, conduct R&D sheet metal work, in the form of short run/one-off projects to prototype new designs as they are created, and provide design input and feedback as applicable to improve and help create new designs. Manage the production schedule and keep a running priority of existing and upcoming work to ensure deadlines are met, for both R&D and production jobs. Employee is expected to carry a manufacturing project from raw material, through production, to packaging and prep for shipping. Ideal applicant has experience in welding, as well as other manufacturing processes like fastener installation and using hand/power tools, although these abilities can be trained on the job to a certain extent. Primary materials to be used are mild steel, stainless steel and aluminum, with potential to use additional materials as required. Employee may be needed to deliver parts directly to clients, generally located in the greater Seattle area. Nice-to-have: Experience with a modern Amada control interface Advanced fabrication techniques (skilled in MIG/TIG welding, etc.) Essential Responsibilities: Run CNC sheet metal equipment: laser cutting and brake forming (and manual machines as applicable) in production and prototyping capacities Run multiple machines simultaneously as required, and/or bounce back and forth between machines Check and monitor parts being run; maintain attention to detail in every aspect of the project Program parts at the console Familiarity with speccing/installing hardware Interpret and work off of manufacturing drawings Perform typical post-production such as deburring, polishing, cleaning, etc. Perform QC and dimensional verification to ensure standards are met and maintained Perform daily and periodic maintenance on machines (fluid levels, chip clearing, etc.) Be accountable and on time; maintain clean and orderly workspace Work as a team member and maintain a scrutinous eye for ways that a part or a project could be improved (this role is not simply button pushing or "turn off your brain" production) In downtime between projects, contribute to the R&D/production effort through collaborative problem solving with other team members, and assist with other projects Education and Experience: Trade school for sheet metal manufacturing, or equivalent experience Proficiency in basic math required for programming and operation of machines Examples of personal projects and/or creative exploration and self-education are preferred Metal fabrication and general shop work experience preferred Bonus points if applicants are already familiar with Laguna laser cutters and Amada press brakes Physical Requirements: Ability to sit or stand for extended periods of time Operate in a shop environment that is frequently noisy Wear proper PPE as required by task Lift or move between 10-50 lbs regularly Operate small forklift or pallet jack Occasionally assist team members in other projects throughout the shop, like relocating equipment, etc. Use hand and power tools (with wood and metal) in a basic or “homeowner” capacity at a minimum Compensation/benefits: Flexible work schedule including opportunities for occasional remote work After-hours access to the R&D Shop for personal projects Comprehensive benefits program including subsidized medical, dental, and vision insurance for employees Eligible for Overtime Pay Company 401(k) plan 14 days of PTO (7 sick days and 7 vacation days) 8 paid Holidays This job description is not exhaustive and the position may include additional responsibilities and expectations not listed here. This job posting is not an employment contract, and employees of this company are employed on an “at will” basis and may be terminated at any time. Please respond with resume and a brief introduction, and include your email address in the subject line.

Position summary: This role is more than a rank-and-file machinist or a “just make this part” machinist. It is an “R&D machinist” with a designer’s mind, who is a problem solver, conceptual thinker, and who is eager to figure it out, through individual effort as well as in collaboration with the team. This position will be largely centered around programming and machining custom parts in one-off or small batch quantity, which may need redesign or rework as the project progresses. Medium-sized, production-style machining projects may also be required. Most parts are designed from scratch by in-house designers, and this position will require fluency with CAD software (Solidworks), not just CAM, as it is expected that machinists can conceptualize and draw a design in CAD, not just carry out the steps to machine it. Essential Responsibilities: Run CNC equipment (and manual machines as necessary) in production and prototyping capacities Run multiple machines simultaneously as required Check and monitor parts being run; maintain attention to detail in every aspect of the project Program parts using Fusion 360 and HSM Works Have proficiency with Solidworks design software Create, interpret and revise manufacturing drawings Perform typical post-production such as deburring, polishing, etc. Perform QC and dimensional verification to ensure standards are met Perform daily and periodic maintenance on machines (fluid levels, chip clearing, etc.) Be accountable and on time; maintain clean and orderly workspace Work as a team member and maintain a scrutinous eye for ways that a part or a project could be improved (this is not simply button pushing or "turn off your brain" machining) At times between machining projects, contribute to the R&D effort through CAD work or collaborative problem solving with other members of the design and manufacturing team as required Education and Experience: Trade school for machining practices or equivalent experience Proficiency in basic math required for programming and machining Design experience in the form of product development or engineering, etc. Examples of personal projects and/or creative exploration and self-education are preferred Metal fabrication and general shop work experience preferred Proficiency in CAM programming in HSM Works/Fusion 360, including advanced techniques like multi-axis and 3D toolpaths. Nice to have: Existing familiarity with HAAS/PROTOTRAK/TRAK mills and lathes Experience in an ISO / ITAR setting Experience with a Quality Management System (QMS) Experience operating a CMM Physical Requirements: Ability to sit or stand for extended periods of time Operate in a shop environment that is frequently noisy Wear proper PPE as required by task Lift or move approximately 10-50 lbs regularly Operate small forklift or pallet jack Occasionally assist team members in other projects throughout the shop, like relocating equipment, etc. Use hand and power tools (with wood and metal) in a basic or “homeowner” capacity at a minimum Compensation/benefits: Flexible work schedule including opportunities for occasional remote work After-hours access to the R&D Shop for personal projects Comprehensive benefits program including subsidized medical, dental, and vision insurance for employees Eligible for Overtime Pay Company 401(k) plan 14 days of PTO (7 sick days and 7 vacation days) 8 paid Holidays We are ultimately seeking talented individuals with a wide range of experience and abilities. Prospective applicants whose work experience is more firmly rooted on the design/engineering side but still have strong abilities in machining and programming are encouraged to apply. This job description is not exhaustive and the position may include additional responsibilities and expectations not listed here. This job posting is not an employment contract, and employees of this company are employed on an “at will” basis and may be terminated at any time. Please respond with resume and a brief introduction, and include your email address in the subject line.

Looking for qualified, experienced welder/fabricator for full time position (no part time or seasonal) Blueprint reading, cutting, layout, measuring, using tools, etc. 2 years welding experience Must be able to TIG and MIG, aluminum, steel and stainless Lots of aluminum WABO cert a plus, but not required Ability to work independently, self-starter Tubing/piping and turn table work, open root. Shop work is across all industries (commercial, marine, space, residential, energy, etc.) Medical/benefits Must reply with resume. Weld Test required Pay DOE:

Must have mechanical assembly experience. Follow drawings and verbal instructions. Use of hand tools. Minimum one year experience. Must have good communication skills! SWING shifts openings. Long term positions. Immediate openings!

About Us: We are a women's accessory company that sells finished textiles to retailers all over the US. Some of our customers are Five Star Hotels and Resorts, and better retail stores. About You: You are an organized individual and you prioritize and keep track of the tasks that are given to you. Sometimes the studio can get very hectic with several jobs due at once on tight deadlines, having an ability to manage pressure and while remaining patient and understanding is critical. Equally you are organized, productive and an imaginative problem-solver/troubleshooter. Ideally you have an interest in an artistic practice yourself have a strong graphics background is a plus. Mainly you have a very strong desire to learn and an interest in becoming part of a growing small business. About The Position: Your role centers on the production of textiles, canvas art as well as studio support and upkeep. This includes: - Cutting art down to size - Prep art according to job specs - Excellent measuring skills - Running the UV and Sublimation Machine - Assist with the preparation and execution of applying art to items and pressing this on a heat press. Folding items and preparing them to ship to retailers. - Print art for production - Provide support in various studio tasks, such as organizing supplies, maintaining inventory, and cleaning workspaces. - Collaborate with the team to fulfill client orders and meet project deadlines. - Follow established studio procedures to ensure efficient workflow and maintain a safe working environment. -Take initiative and assist in other studio-related activities as needed. - Maintaining office organization systems - Regular cleaning of the studio - Printing and post printing support - Packing and shipping jobs - Ability to lift 50lbs Requirements: - Experience in a production environment a plus - Willing to learn to produce products on a UV and Sublimation Machine - Previous experience in a print shop a plus - An excitement to learn new skills and grow - You have a love for what you do along with a positive "can do" attitude - Independent & proactive, but works with a team mentality - Graphics experience a plus - Extremely detail oriented

Bellevue Sperm Bank is looking for new sperm donors in the Bellevue area to join our program. There is a national shortage of eligible tissue donors to help patients looking to fulfill their dream of starting a family. You can help! APPLY TODAY at: https://apply.bellevuespermbank.com/ Requirements: -Men 18-39 years old -All Ethnicities needed! -Any height, hair color, eye color -Willing to commit to at least 6 months -College degree preferred. Students & Working professionals welcome. Perks: +Earn up to $100 per donation – donate up to 3x per week +Flexible scheduling +Free routine STI testing +Free genetic screening- 514 genetic conditions https://www.bellevuespermbank.com/