Browse
···
Log in / Register

Cabinet Maker / Millworker / Trim Carpenter (Marietta)

Negotiable Salary

581 Webb Industrial Dr, Marietta, GA 30062, USA

Favourites
Share

Description

Company Description The Design Manufacturing Group has built complete restaurant interiors and furniture for over 30 years. While our customers are ensured of a consistent factory-built product, we also offer full millwork, finishing and installation teams. No project is too large, or too small. This experience and capability, makes DMG unique in the furniture industry. The result is a true single-source solution, ensuring easier project management, consistency, quality, and the best end-result for our customers. Job Description DMG is seeking Carpenters / Cabinet Makers for fabricating custom cabinets, bar tops, and other misc millwork. The ideal candidate will have experience building custom, stain grade cabinetry. DMG also has a full finishing shop, where we apply paints, stains, and other finishes. Responsibilities • Use of power tools, saws, routers, etc. to fabricate parts for assembly into finished product • Reading of drawings and blueprints to identify needs of the finished item and ensure customer satisfaction • Attention to detail to ensure quality standards are maintained • Adherence to safety standards • Communicating with shop personnel to maintain coordination between jobs and priorities Desired Qualifications • Strength and ability to lift items over 50 pounds • Strong worth ethic with a good attitude and team spirit • A self-starter who is hardworking and willing to focus on what it takes to get the job done We offer a competitive pay based on experience and results

Source:  craigslist View original post

Location
581 Webb Industrial Dr, Marietta, GA 30062, USA
Show map

craigslist

You may also like

Craigslist
Apartment Maintenance Technician
We are actively seeking Apartment Maintenance Technicians to join our team and support our clients in maintaining high-quality residential communities. These positions are critical in ensuring the timely and efficient turnover of apartment units, addressing resident work orders, and executing repairs and renovations. Rate of Pay: $26–$28 DOE Shift: Monday – Friday | 8:00am – 5:00pm Requirements: Must pass a background check in accordance with family housing standards Duties include: • Perform full unit turns: Carpentry, drywall patching, painting, plumbing, appliance installs, and non-licensed electrical work • Prepare move-in inspection reports with new and vacating residents • Track key/lock system and change locks as needed • Install and troubleshoot appliances such as dishwashers, ranges, and refrigerators • Provide courtesy services for tenants, including package delivery and routine/preventative maintenance for pool/spa areas Qualifications: • Minimum 2 years of hands-on experience in apartment maintenance, unit turns, and work orders, with skills in plumbing, light electrical, and appliance troubleshooting • Strong knowledge of hand tools, power tools, and maintenance equipment • Ability to manage a physical workload while effectively prioritizing and multi-tasking • Detail-oriented with a focus on meeting deadlines and completing quality work • Possess basic hand tools to perform daily tasks • Reliable transportation for travel to and from job sites
Denver Park, 1110 17th St, Denver, CO 80202, USA
$26-28/hour
Craigslist
QC TECH Civil Construction Field (Londonderry NH)
Helical Drilling, a New England based design build Geotechnical Engineering firm is looking to fill a Quality Control Technician’s role. This role would ensure that the project’s specifications are followed and that Helical Drilling’s work has been installed according to the design. They will work with the Helical Drilling (HDI) field supervisor, HDI office, the general contractor, and the project geotechnical engineer. The individual is responsible for recording accurate field and production information on a daily basis along with recognizing unknown anomalies that can affect the original design parameters. When changes or anomalies do occur, they also need to collaborate with the above mention entities on solutions and/or repairs. A successful QC Tech will ensure a project has been built correctly. Responsibilities and Duties: • Read, understand, and follow the design submittal and specifications as it relates to construction of the project. • Document and transfer to field layout plans as-builts, test pier locations, offsets, newly discovered utilities, etc. • Read and understand the boring logs. • Inform field supervisor of on-site change of conditions. • Review design submittal to verify information is accurate. • Complete accurate and timely Daily Field Reports (DFRs). • Prepare plans for field production and use. • Document and report all anomalies. • Participate in project kick off and closeout calls. • Communicate with the HDI office, GC, and/or Geotechnical engineers as directed by field supervisor. • Keep track of production and assist in sequencing of installing elements. • Introduce and be engaged with the on-site geotechnical consultants. • Calculate volume of materials needed (concrete, cement, grout, sand mix, infield mix, etc.) • Setup and preform load tests. Understand the required criteria for execution and completion of a successful test. • Record and complete all logs (drilling, driving, sheeting, grouting, test piers, installation, etc.) • Review the Quality Control Summary sheet and As- Built information at the end of a project for accuracy before submitting to the office. • Enter and record accurate information into the logs. REQUIREMENTS: • MUST HAVE: Reliable Vehicle and Valid Drivers License (We work all over New England) • 1-5 years of experience as a QC or laborer with QC experience in a fast paced construction company-Preferred • OSHA 10 Preferred • Ability to lift 50-100 lbs. • Must be able to work assigned hours with crew with some overnights • High School Diploma or GED equivalent required *Must be able to speak, read and write English and be a US Citizen ESSENTIAL KNOWLEDGE AND SKILLS * Attention to detail * Responsible attitude * Understanding of basic geometric formulas * Ability to read, interpret, and scale plans * Ability to use a tape measure for field layout * Ability to use elevation control devices * Well organized * Confident * Takes care to complete tasks fully and well * Labor as needed * Versatile BENIFITS * 100% Company Paid Health and Dental Care (Single or Family) * 3 Weeks PTO (Paid Time Off) * 9 Paid Holidays * OT After 8 Hours * Rarely Work Weekends * Paid Travel Time and Mileage * Per Diem for Overnight Travel * Paid Hotel Stays (Single Rooms) * 401 K Contribution * Continued Training and Certifications * ESOP, Employee Stock Ownership Plan Equal Opportunity Employer
275 Mammoth Rd, Londonderry, NH 03053, USA
$23/hour
Craigslist
FOREMAN-Civil Construction (Londonderry NH)
Helical Drilling, is looking for an experienced Foreman. Helical is a geotechnical design build contractor that does work all over New England. The foreman is responsible for their assigned project and crew. Their primary responsibilities are to oversee and maintain a safe work environment. They will guide and direct the crew along with managing the daily activities of the project. They will ensure that the project is built according to the design submittal. They will keep General Superintendent (GS) & Construction Project Manager (CPM) informed on the status of the project daily or as needed and will also coordinate site activities with the General Contractor and with the GS & CPM when required. Primary Responsibilities 1. Responsible for the assigned project 2. Oversee and maintain a safe work environment 3. Guide and direct the crew 4. Manage daily activities on project 5. Build project according to the design submittal. 6. Keep GS & CPM informed on status of the project daily or as needed. REQUIREMENTS: • MUST HAVE: Reliable Vehicle and Valid Drivers License (We work all over New England) • 6-8 years of construction experience in a fast paced construction company and 2 plus years as a foreman running crews and jobs • OSHA 10 Preferred • Ability to lift 50-100 lbs. • Must be able to work assigned hours with crew with some overnights • High School Diploma or GED equivalent required *Must be able to speak, read and write English and be a US Citizen BENIFITS * 100% Company Paid Health and Dental Care (Single or Family) * 3 Weeks PTO (Paid Time Off) * 9 Paid Holidays * OT After 8 Hours * Rarely Work Weekends * Paid Travel Time and Mileage * Per Diem for Overnight Travel * Paid Hotel Stays (Single Rooms) * 401 K Contribution * Continued Training and Certifications * ESOP, Employee Stock Ownership Plan
275 Mammoth Rd, Londonderry, NH 03053, USA
$28/hour
Cookie
Cookie Settings
Our Apps
Download
Download on the
APP Store
Download
Get it on
Google Play
© 2025 Servanan International Pte. Ltd.