Browse
···
Log in / Register

Seeking OTR Drivers For Round Trip Shipments & Moore!!!! (Grand Rapids, MI)

Negotiable Salary

1750 Kendall St SE, Grand Rapids, MI 49508, USA

Favourites
Share

Description

$3,000 Sign ON BONUS INCLUDED Seeking OTR Owner Operators For Round Trip Shipments! You must have a clean driver license record to qualify. We provide brand new equipment such as a trailer if needed to rent. We charge 12% & give you 88% OR A Flat 27%. We provide a lot of TX work. The truck must be in good clean condition and (preferably newer year trucks) We are safe dispatch team and a good working environment. We only do work with a 53FT Dry Van. We do provide Additional Bonuses. If you have any questions call me on my cell 616-389-4213. 24/7 dispatch and will not sit a day at any place. BENEFITS OFFERED: VERY AFFORDABLE LIFE/ACCIDENTAL INSURANCE POLICES $3,000 Sign ON BONUS INCLUDED Seeking OTR Company Drivers For Round Trip Shipments! Drivers must have clean records on their license. We can either start you up to 65.c/mile or we can pay you 25% of the load along with additional bonuses. We pay $69/day for PerDiem. We pay every Friday via direct deposit. We are a safe dispatch and provide you good safe lanes. We Provide additional bonuses. IF you have any questions you may call me on my cell 616-389-4213 BENEFITS OFFERED: VERY AFFORDABLE LIFE/ACCIDENTAL INSURANCE POLICES $3,000 Sign ON BONUS INCLUDED SEEKING PAIR OF TEAM DRIVERS that are willing to run a lot of miles. Both Drivers must have clean records to qualify. We provide TEAM Service and Try to run about 6,000 miles weekly. Can be owner-operator team drivers as well. If you are wondering about the company pay, we pay either percentage or per mile. If you have any further questions call me on my cell 616-389-4213. BENEFITS OFFERED: VERY AFFORDABLE LIFE/ACCIDENTAL INSURANCE POLICES $3,000 Sign ON BONUS INCLUDED Seeking OTR TEAM Drivers For Round Trip Shipments and More. The requirements are 2 drivers with Clean CDL Class A Driver Licenses. We require about 6 months of experience of over the road work. Will be hauling a 53-Dry Van and brand new equipment will be provided. We provide 24-hour dispatch and run anywhere with tons of miles. We do accept company drivers or Owner Operators for this position. For owner-operators we provide 88% of the load and for company drivers start them at 62c/mile or 25% of the load. Great pay and great working environment. If you have any further questions please give me a call on my cell phone @ 616-389-4213. BENEFITS OFFERED: VERY AFFORDABLE LIFE/ACCIDENTAL INSURANCE POLICES

Source:  craigslist View original post

Location
1750 Kendall St SE, Grand Rapids, MI 49508, USA
Show map

craigslist

You may also like

Craigslist
Tool Maker (Manchester)
Position Summary: Analyzes specifications, lays out metal stock, sets up and operates machine tools, and fits and assembles parts to fabricate and repair metalworking dies, cutting tools, jigs and fixtures, gauges, and machinists' hand tools by performing the following duties. Responsibilities: • Study specifications such as blueprints, sketches, models, or descriptions, and visualizes product to determine materials required and machines to be used to fabricate parts. • Computes dimensions, plans layout, and determines assembly method and sequence of operations. • Sets up and operates machine tools such as lathes, milling machine, and grinder, to machine parts, and verifies conformance of machined parts to specifications. • Verifies dimensions, alignments, and clearances. • Examines standard or previously used dies, tools, and jigs and fixtures, and recommends design modifications regarding construction and function of part. • Develops specifications from general descriptions for specialty tools and draws or sketches design of product. • Must help the team maintain a clean and organized environment. • Work with Maintenance Dept to reproduce machine parts for timely repairs. Skills & Abilities • Understands Controls and Instrumentation, Manufacturing Experience, Mechanical Inspection • Proficient with a variety of machine tools, including, lathes, mills, grinders, etc. • Proficient with the use of both metric and standard measurement systems. • Proficient in the use of precision gauging. • Experience with single hit and progressive dies • Experience working with progressive dies (tight tolerances) in a precision metal forming/stamping plant. • Experience trouble shooting progressive die production issues. • Follow and enforce all safety policies and procedures • Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Education & Experience • A minimum 15-20 years’ experience . Wire EDM experience helpful. • The above description covers the most significant duties performed but does not exclude other occasional work assignments not mentioned, the inclusion of which would be in conformity with the factor degrees assigned to this job. Duties, responsibilities, and activities may change at any time with or without notice. Benefits: • Life and Disability insurance, Health Insurance • 401K and profit sharing, Paid holidays, Paid vacation. • Hours –Monday thru Thursday; 6:00 AM – 4:30 PM, • Job Type: Full-time • Salary: Based on Experience
270-324 Elm St, Goffstown, NH 03045, USA
Negotiable Salary
Craigslist
Manual Machinist Wanted (seattle, WA)
Looking for both Journeyman Manual Machinist as well as those interested in Apprentice Manual Machinist. About: Propulsion Systems, Inc. is a repair Facility located in South Seattle. We provide Field Service Engineers & Manufacturing for Controllable Pitch Propellers, Thrusters, PTO's, Shaft Brakes, Electronic and Pneumatic Controls for marine applications. Salary/Compensation: $25 - $50 an hour (Dependent on experience level) Duties and Responsibilities: • Operate Machinery: Use manual tools such as lathes, milling machines, drill presses, and grinders to cut, shape, and finish materials according to specifications. • Read Blueprints: Interpret technical drawings, blueprints, and schematics to determine machining requirements and methods. • Measure and Inspect: Utilize precision measuring instruments (e.g., calipers, micrometers) to ensure parts meet quality standards and specifications. • Maintenance: Perform routine maintenance and repairs on machinery to ensure optimal performance and safety. • Quality Control: Conduct inspections of finished products and make necessary adjustments to maintain high-quality standards. • Capable of training other machinists and correcting errors Perks/Benefits: • Safe Harbor 401k through ADP • 2 Weeks’ vacation after the first year of employment • No tools required, all items supplied by PSI • Two sets of coveralls and one pair of work boots provided per year after probationary period. • Flexible work schedule / start time • Training and additional schooling is offered after the first year of employment Qualifications: • Education: High school diploma or equivalent. • Experience in a manufacturing or machining environment is required. Previous roles as a lathe operator or in manual machining are advantageous. • Must be able to set up and operate at least two of the fabrication processes while achieving and maintaining established quality and efficiency standards • Make parts to meet the requirements of Design and Manufacturing Engineering using proper tooling, inspection equipment and through proper set-up and operation of equipment • Measure, examine, and test completed units to detect defects and ensure conformance to specifications, using precision instruments • Requires standing 90% of shift • Requires good manual dexterity • Exposed to hazards/risks that require body protection (gloves, pants, steel toes, sleeves, safety glasses) • Apply basic skills. Performs simple fabrication processes Requirements: • Ability to machine a variety of metals such as 300 and 400 series stainless steels, brass, copper, steel, composites, and exotic alloys • Prior machining experience (3+ years for Journeyman level applications) • Prior experience with set up and operation of manually controlled machines (3+ years for Journeyman level applications) • Prior experience reading and interpreting blueprints (2+ years for Journeyman level applications) • Experience using precision tools, machinery and equipment such as lathe, vertical milling machine, drill press, hydraulic press, chop saw, band saw, and a variety of cutting tools and equipment • Rigging experience using safe practices • Good communication skills • Knowledge of setting up and operating manual lathes and mills • Track record of being able to provide high quality work in a fast-paced environment • Plan, layout, set-up, operate and make tool adjustments to cut and shape all types of metals and synthetics using manual (e.g., lathes, millers and grinders) numerically controlled and computerized machine shop equipment • Strong focus on accuracy and quality in work, with the ability to troubleshoot and resolve issues as they arise. • Clear communication skills, Patience, Eye for details
Boeing Propulsion Engineering Labs (PEL), 1150 S Willow St, Seattle, WA 98108, USA
$25-50/hour
Cookie
Cookie Settings
Our Apps
Download
Download on the
APP Store
Download
Get it on
Google Play
© 2025 Servanan International Pte. Ltd.