Team Lead (Automotive Production)

JOB SUMMARY This position performs a variety of additional duties to that of a CNC Machine Set-up Operator. In addition to their regular production related duties, the Department Lead needs to coach, manage, communicate, oversee daily maintenance and 5S, oversee quality of parts produced within their designated department, and assist Production Supervisor with assigning production within the milling department and executing the production schedule. ESSENTIAL DUTIES AND RESPONSIBILITIES Machine setup, operation, and startup, restarting the machine, adjusts tooling to maintain proper sizes, replaces broken or worn tooling. Verify conformance of work piece to specifications, using measuring instruments such as micrometers, calipers, and go-no-go gauges. Secures all tooling and instruments required; Positions and secures work piece in holding device, machine table, chuck, centers, or fixtures. Understand how to adjust work offsets and part zero. Understand how to adjust the speed and feed of the machine according to different part specifications. Confirms daily preventative machine maintenance: proper coolant levels, filters, fan operation, cleans machines, etc. Responsible for loading tools, setting tool Diameters so that cutter radius compensation may be used. Understand how to install Work holding. Assist Production Supervisor assigning personnel to jobs (i.e. contingency and/or priority jobs) on machines according to the production schedule and/or priorities established in production meetings. Monitor all production documentation for accuracy and completion. Assist Production Supervisor in maintaining accuracy of production reporting in ERP system (Epicor). React in real time as problems arise and make changes to daily assignments or request additional resources in order to execute the production schedule. Assist in the training and evaluation of employees that are new or need to learn a new skill. Monitor employee efficiencies and performance. Provide recommendations to the Production Supervisor for performance reviews. Responsible for ensuring their personnel clean and organize their workstations before the end of their shift. Collect Maintenance Logs at the end of the month and provide these to their supervisor for review. Works off shifts and weekends as demand requires. Report safety concerns, maintenance, violations of company policy, performance, and production issues Briefly report production performance of department personnel to plant leadership on a daily basis. Takes responsibility for the quality of the parts produced by department personnel. Conducts regular spot checks of the quality of production. Participate and provide input for nonconforming parts at the Material Review Board (MRB) and attend corrective action meetings to determine root cause of the nonconformities. Additional responsibilities as assigned by the supervisor may include department transfers to meet production needs. REQUIRED SKILLS / ATTRIBUTES Ability to recognize and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to communicate effectively with supervisor and co-workers as needed. Ability to perform intermediate shop math skills and calculations: fraction conversions, divide, multiply, percentages, etc. Basic computer skills required to perform inquiry, data collection or input. Strong work ethic: Willing to work OT to meet tight deadlines as needed. EDUCATION AND EXPERIENCE High school diploma or GED. Minimum of 3 years’ experience in a CNC related field - set up experience preferred. Ability to quickly use the control panel to do offsets and edits on 2-3 of the FMS machinery. Tolerance: Ability to machine parts to +/- 0.0005” for diameter and +/- 0.001” for length. Ability to read and interpret GD&T blueprints to the needed specification in creating a part. PHYSICAL JOB REQUIREMENTS Regularly required to stand and reach the duration of shift, 8-10 hours. Occasionally required to walk, sit, stoop, kneel, crouch, or bend. Frequently required to perform repetitive or short-cycles work. Regularly lift, push, or pull up to 10 pounds and occasionally up to 50 pounds. Understands and observes all necessary safety procedures: safety glasses, shoes, ear protection, machine interlocks, lifting guidelines, etc. as designated in specific work area assigned.

Have you been looking to make a move?  This is a newly created position and a great opportunity for a proven proffessional hazmat tanker driver located in North Carolina!  Our OTR Compressed Natural Gas (CNG) CDL-A Hazmat Drivers transport CNG / Renewable Natural Gas for several projects across the USA. Our drivers are regularly dispatched on dedicated and non-dedicated customer runs, they also provide vacation / staffing relief for local drivers stationed throughout the U.S.A., and occassionally company equipment moves. Often drivers fly into an area and are responsible for a dedicated run for up to 2-3 weeks and fly back for scheduled home time. Our OTR CDL-A Hazmat Drivers serve our long-haul, Mobile Energy Solutions (MES), operations by the safe transportation of compressed biomethane (Hazmat 1972). Drivers primarily deliver and unload CNG to a wide assortment of client locations and job sites. Occassional loads of Liquid Natural Gas (LNG) will also be required.  At REV our drivers are our company ambassadors that working closely and safely with our business partners to deliver a clean, reliable and renewable energy source.  * Build trust and credibility by holding yourself and all co-workers to the company's code of business ethics, and company policies & procedures. * Rev is required to maintain FMCSA, PHMSA, OSHA, customer, and vendor safety protocols. Training requirements for these safety protocols are a requirement of this position. Drivers will be required to participate in extensive online and in-person training as needed to maintain required documentation and training levels. * Trip sheets, detailed paperwork including Bills of Lading (BOLs), fuel & weight slips and or special load documentation must be handed in or scanned to dispatch daily. * Drivers are required to perform, document, certify, and submit all required DOT pre-trip and post-trip inspections.  * In partnership with dispatch and their direct supervisor, the driver is responsible for timely scheduling, shuttling to and from, and confirmation of power unit and trailer preventative maintenance and repairs. * The Company is required to keep an accurate record of all drivers’ on-duty time per FMCSA law. Drivers must document, certify, and submit accurate Records of Duty Status (RODS) via the Company selected Electronic Logging Device (ELD) system or other legal means of tracking Hours of Service (HOS). Training and other tasks not involving driving or being in the truck must be manually entered and tracked within FMCSA regulations. * Drivers must adhere to all HOS rules and regulations including always following the 8-hour, 10-hour & 34-hour break laws. The 11-hour, 14-hour & 70-Hour driving laws. It is the duty and responsibility of the driver to track HOS limitations and report conflicts to their dispatcher. Drivers who use the Yard Move (YM), or Personal Conveyance (PC) must do so within the limitation of the law and company policy. * All drivers must abide by all State and Federal DOT rules and Regulations while safely operating an REV vehicle on public highways and customer or business partner property.REV has a strong commitment to our customers when it comes to safety and arriving on time. The driver is expected to make pickup and delivery times, if you are running behind you are required to inform dispatch immediately. * Time off requests require approval and 7-day notice for a single day and 14-day notice for any more than a single day. * Drivers must understand there will absolutely be weather delays, business needs, or another unpredictable event that causes a change in route or schedule. Drivers must be reasonably flexible, and we will do the same! * Straight Salary position - $2115 Per week.  ($110,000/Year base plus bonus programs below.) * $550 per month safety bonus program in addition to salary is available. * Annual year-end discresionary performance bonus program in addition to salary. * Annual Fire Retardant (FR) Clothing Allowance & FR Winter Coat Program * Annual Safety Shoe Allowance * Clean DOT Inspection Bonuses * Late model sleeper trucks.(new Petes on order) * Very low (Have you been looking to make a move?  This is a newly created position and a great opportunity for a proven professional hazmat tanker driver!  Our Over-The-Road (OTR) CDL-A Hazmat Drivers transport Compressed Natural Gas (CNG), Renewable Natural Gas (RNG), and Liquefied Natural Gas (LNG) for several projects across the USA.  Our drivers are regularly dispatched to long and short-term CNG/RNG/LNG projects.  They also provide vacation/staffing relief for short-haul drivers stationed throughout the USA, as well as company equipment moves. Often, drivers fly or drive into an area and are responsible for a dedicated run for up to 4-8 weeks at a time and then fly back for scheduled home time.  Drivers hired for this position will be expected to work in the Myrtle Beach SC area to support a recurring project Nov 1st-March 31st, returning home if/when not needed.     This is a salaried position with the opportunity for monthly and year-end bonuses with a growing and thriving company.  Drivers will be issued a new or late-model sleeper cab power unit for their dedicated use.    At REV our drivers are our company ambassadors who working closely and safely with our business partners to deliver a clean, reliable, and renewable energy source.  * Build trust and credibility by holding yourself and all co-workers to the company's code of business ethics, and company policies & procedures. * Rev is required to maintain FMCSA, PHMSA, OSHA, customer, and vendor safety protocols. Training requirements for these safety protocols are a requirement of this position. Drivers will be required to participate in extensive online and in-person training as needed to maintain required documentation and training levels. * Trip sheets, detailed paperwork including Bills of Lading (BOLs), fuel & weight slips and or special load documentation must be handed in or scanned to dispatch daily. * Drivers are required to perform, document, certify, and submit all required DOT pre-trip and post-trip inspections.  * In partnership with dispatch and their direct supervisor, the driver is responsible for timely scheduling, shuttling to and from, and confirmation of power unit and trailer preventative maintenance and repairs. * The Company is required to keep an accurate record of all drivers’ on-duty time per FMCSA law. Drivers must document, certify, and submit accurate Records of Duty Status (RODS) via the company-selected Electronic Logging Device (ELD) system or other legal means of tracking Hours of Service (HOS). Training and other tasks not involving driving or being in the truck must be manually entered and tracked within FMCSA regulations. * Drivers must adhere to all HOS rules and regulations including always following the 8-hour, 10-hour & 34-hour break laws. The 11-hour, 14-hour & 70-hour driving laws. It is the duty and responsibility of the driver to track HOS limitations and report conflicts to their dispatcher. Drivers who use the Yard Move (YM), or Personal Conveyance (PC) must do so within the limitations of the law and company policy. * All drivers must abide by all State and Federal DOT rules and Regulations while safely operating an REV vehicle on public highways and customer or business partner property. REV has a strong commitment to our customers when it comes to safety and arriving on time. The driver is expected to make pickup and delivery times, if you are running behind you are required to inform dispatch immediately. * Time off requests require approval and a 7-day notice for a single day and a 14-day notice for any more than a single day. * Drivers must understand that there will absolutely be weather delays, business needs, or another unpredictable event that causes a change in route or schedule. Drivers must be reasonably flexible, and we will do the same! EDUCATION / EXPERIENCE * Five years CDL-A tractor-trailer experience * High School Diploma or Equivalent preferred * Must be 25 years of age or older. REQUIREMENTS * Must be able to fly/drive in and fly/drive out of work areas when required. * Have extensive knowledge of all commercial motor vehicle rules and regulations. * Interstate CDL -A Driver’s License * Valid medical certification  * CDL Tanker endorsement * CDL Hazmat endorsement * Safe (PSP) Pre-Employment Screening Program report * Safe (MVR) Motor Vehicle Report * Safe FMSCA Drug and Alcohol Clearinghouse report * NO JOB HOPPERS! * NO CROC WEARING, STEERING WHEEL HOLDERS!   REV LNG LLCClick here to Apply Online

PTS and EWM Lead Responsible for implementing and optimizing Extended Warehouse Management solutions for our clients. Work closely with client to understand business requirements, design solutions, configure systems, conduct testing, and provide ongoing support and maintenance. Responsibilities: 1. Collaborate with clients to gather business requirements and translate them into functional specifications for EWM solutions. 2. Design and configure EWM systems based on best practices and industry standards. 3. Develop and execute test plans to ensure the quality and functionality of EWM implementations. 4. Provide training and support to end-users on EWM functionalities and processes. 5. Troubleshoot issues, identify root causes, and implement corrective actions. 6. Stay updated with the latest trends and developments in EWM technology and incorporate them into our solutions. 7. Work collaboratively with cross-functional teams, including developers, project managers, and business analysts, to deliver successful projects on time and within budget. 8. Contribute to pre-sales activities, such as solution demonstrations, proposal preparation, and client presentations. 9. Should have experience of ATTP integrations with the EWM and PTS Modules.

EUROTRANS EXPRESS IS LOOKING FOR OVER THE ROAD DRIVERS Call Daniel at 630-290-2512 or go to http://eurotransexpress.com/apply/ We have 2023 Freightliner Cascadia Automatic and 2024 Volvo Automatic available $0.65 per mile for REEFER (all miles are paid, loaded and empty) You get FREE Occupational Accident Insurance We pay $50 per extra stop. Whatever loads are delivered by Friday are paid the following Friday with direct deposit. We use MOTIVE ELD (KeepTruckin). We require the driver to stay on the road minimum of 2 weeks and then a couple of days off at home. We have dispatch 24/7/365. Trucks are governed at 70 mph. Trucks have PrePass for the stations and transponders for toll roads (EZ Pass, etc.) Minimum of 2 years OTR experience. No DUI. Call Daniel at 630-290-2512 or go to http://eurotransexpress.com/apply/

Join a team where your impact reaches beyond the stars! At Terran Orbital, you’re not just part of the system – you’re a vital force propelling our mission forward. As trailblazers in satellite manufacturing and aerospace innovation, we shatter boundaries daily to deliver groundbreaking solutions that power our nation’s defense and commercial missions. We are a unique, fast growing, and trusted team dedicated to swiftly and efficiently designing, building, launching, and operating state of the art satellites for advanced mission constellations. If you’re driven by purpose, inspired by challenges, and ready to leave your mark on the universe, you’ll find a home and endless opportunities for growth here. Together, let’s redefine what is possible in orbit and beyond! Terran Orbital is seeking an experienced Production Supervisor to join our growing team. Reporting to the Production Manager, the Production Supervisor will work within a multidisciplinary team to build, test, and maintain a variety of complex hardware assemblies. This role is on our Weekend shift (Friday - Sunday) from 6:00AM - 7:00PM Key Duties and Responsibilities Collaborate with a high-performing team of skilled assembly and test technicians Properly execute production needs within weekly-monthly goals An understanding of aerospace manufacturing practices Manage Modules build and test production schedules Propose and incorporate continuous improvements for product quality, cost, and throughput Identify documentation, root cause, and corrective action of build and test anomalies Assure maximum lab equipment uptime by identifying issues early and coordinating calibration, repair, and maintenance Ensure appropriate inventory levels and notify the supply chain when stock needs replenishment to ensure on-time delivery of goods Track and categorize all costs related to production Perform strategic hiring to grow the current team to meet future production goals, and evaluate the teams’ skills and talents against Company needs Develop, maintain, and communicate production metrics Coach team members on best practices to ensure the quality, efficiency, and throughput of spacecraft modules Perform other duties as assigned Requirements 5 years’ experience as a project lead or project manager with a demonstrated reputation for delivering unique, high-complexity systems 3 years of supervisory experience in a hands-on workforce in a high-reliability industry Able to interface seamlessly with all levels of the organization Previous experience with electromechanical assembly, or spacecraft/spacecraft hardware manufacturing Familiarity with Aerospace Quality standards (ISO9000, AS9100) and space hardware handling practices Competency with MS Office suite, including Word, Excel, and PowerPoint. Familiarity with JIRA is a plus Demonstrated experience with rapid development projects Familiarization with cleanroom and ESD precautionary measures Demonstrated teamwork both within function and cross function Clear, concise, and compelling oral and written communicator Meticulous attention to detail and documentation Proven ability to deliver on time and on-budget Demonstrate employee management experience and proficiency in task management to meet required deadlines Ability to read & understand mechanical drawings Demonstrate experience following procedures to build intricate mechanical/electrical assemblies Competency with a variety of hand tools, including torque wrenches, crimping tools, epoxy applicators, tap & die sets, deburring tools, rotary tools, drill press, bandsaw, Competency in using calipers & micrometers to perform conformance inspection of mechanical structures Competency with a variety of testing equipment, including power supplies, DC loads, DAQs, test harnesses Provide input to production plans capable of identifying accurate component delivery dates across multiple Satellite Programs U.S. Citizenship with ability to obtain and maintain DoD Security Clearance Benefits 100% Company-paid comprehensive medical, dental, and vision coverage for you and your dependents 401(k) Match Flexible Time Off (FTO) Education Reimbursement Competitive Paid Parental Leave Salary Range $80,000-$125,000 Your actual level and base salary will be determined case-by-case and may vary based on the job-related qualification, knowledge, skills, education, and experience. In addition to base salary, we offer 100% covered medical, dental, and vision coverage, a 401(k) match, Flexible Time Off (FTO), covered life insurance, maternity and paternity leave, tuition reimbursement, employee referrals, and lots of swag!    About Terran Orbital Terran Orbital is a leading manufacturer of satellite products primarily serving the aerospace and defense industries. Terran Orbital provides end-to-end satellite solutions by combining satellite design, production, launch planning, mission operations, and on-orbit support to meet the needs of the most demanding military, civil, and commercial customers. Learn more at www.terranorbital.com Physical Demands An employee must meet the physical demands described to perform the essential functions of this job successfully. In performing the duties of this job, the employee is routinely required to sit or stand for long durations of time, in addition to bending, reaching, and walking. This would require the ability to lift or move objects up to 10 pounds and occasionally lift or move objects up to 25 pounds. This position is generally sedentary, with substantial computer usage. Work Environment The job operates in a professional office environment but in a manufacturing company. This job routinely uses standard office equipment such as computers, phones, photocopiers, and scanners. Disclaimers To comply with U.S. Government space technology export regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. In addition, please note that this position may require a current United States National Security clearance or eligibility for such a clearance. Terran Orbital is an Equal Opportunity/Affirmative Action Employer. We consider applicants without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender, gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, or membership in any other group protected by federal, state, or local law. If you need assistance or accommodation due to a disability, you may contact us at hr@terranorbital.com. Terran Orbital does not accept unsolicited resumes from recruiters, employment agencies, or staffing firms. To conduct business with Terran Orbital, a Master Services Agreement (MSA) must be executed and confirmed prior to submitting any information relating to a potential candidate. Without a signed MSA, Terran Orbital shall not be responsible to any individual or entity for any payment relating to any form of fee or compensation. And, in the event that a resume or candidate is submitted by a recruiter, an employment agency, or a staffing firm without a fully executed MSA, Terran Orbital has the unrestricted right to pursue and hire any of those candidate(s) without any legal or financial responsibility to the recruiter, agency, and/or firm. 

Solo drivers with Class "A" CDL wanted for Over the Road or REGIONAL. Our commitment to safety, providing quality customer service, and showing our driver's we respect and appreciate them, is our #1 goal. Let us get you “ON THE ROAD AGAIN"! What we offer our drivers: ✅ PAID up to .65cpm (based on experience, MVR & PSP safety reports) ✅ 1099 ✅ Weekly pay with direct deposit ✅ Excellent Equipment (Newer Freightliner Cascadias) and 53’ dry vans ✅ 24/7 - professional dispatchers ✅ Assigned trucks and trailers ✅ Highest paid layovers, stop-offs and detentions ✅ Empty miles paid ✅ No touch freight ✅ Power inverter ✅ APU ✅ Passenger policy ✅ On site mechanic shop ✅ FLEXIBLE HOME TIME (OVER THE ROAD OR REGIONAL) WE KEEP OUR DRIVERS ROLLING so you’re on the path to making 💰💰💰 Requirements: ⚠️ Class “A” CDL ⚠️ Minimum 2 years of OTR verifiable experience ⚠️ Must be at least 23 years of age ⚠️ Must have a Clean MVR, PSP If interested in this great opportunity; please call us at 815-526-0551 or 815-669-1839. After hours; Please leave us your name & number; we'll call you upon return to office. We would love to give you details about this fantastic opportunity. WE ARE AN EQUAL OPPORTUNITY EMPLOYER. Application available online at:https://intelliapp.driverapponline.com/c/kalogisticsllc. All calls are replied too and applications are reviewed within 24 hours on business days. If you don't apply; we can't make you an offer! Find out more details today!