Browse
···
Log in / Register

Electrical Technician

$26/hour

New Flyer

Crookston, MN 56716, USA

Favourites
Share

Description

The Electrical Technician will be responsible for providing programing, troubleshooting, installation and repair of vehicle electrical, HVAC, and mechanical systems within the manufacturing industry.  This position requires you to use your excellent problem-solving skills, high attention to quality and safety, and positive teamwork attitude to drive your career. Seeking candidates for 1st shift 7:00a-3:30p. There may be overtime opportunities available after the scheduled shift and on Saturday.    WHAT YOU WILL DO: Install and repair various Hybrid Drive systems, communication networks, and electrical components Inspect and diagnose electrical systems issues using advanced electrical theory, PLC and ladder logic Interpret blueprints, process sheets, schematics and instructions for appropriate repairs and process Maintain clean and safe work practices with electrical systems by adhering to safety policies, procedures, and processes Inspect and communicate issues that arise in the required quality checkout Document work and results with support of various software programs including, Microsoft Office Suite, Internet browsers, and diagnostic applications Install and repair electrical control components such as resistors, diodes and relays) Expand knowledge of technical and maintenance principles including how to perform work around high voltage systems (200+ volts) New Flyer is an EEO/AA/Female/Minority/Disabled/Vets Employer.   Accommodations are available at all stages of the recruitment process, at the candidates’ request. Requirements Experience in electrical and mechanical diagnosis and repair.   High voltage experience a plus. Previous PLC, ladder logic, AC and DC system experience. Experience reading engineering documents, wiring schematics and instructions. Commitment to organizational health and safety standards and procedures.  Strong problem solving and communications skills. A valued team member who builds collaborative relationships through honesty and integrity. Accountable with a strong attention to detail and quality, while meeting deadlines. Ability to bend, stoop, reach and climb up and down ladders. Flexibility to work both first (1st) or second (2nd) shift. Intermediate level computer skills preferred. Associate degree in automotive discipline, electronics, or equivalent vocational school preferred. Benefits Competitive Wages - $26.49 1st Shift  - 1st pay increase at 5 months New hire allowance - $2,500  Immediate benefit eligibility Paid holidays and vacation 401K with generous company match Relocation support available On-the-job training provided in continuous learning environment Advancement opportunities with a growing company Be part of a team who is leading the world’s electrification of mass mobility Take a look at the exciting work you can be a part of!  NFI Group | We Move People - YouTube  

Source:  workable View original post

Location
Crookston, MN 56716, USA
Show map

workable

You may also like

Workable
Sewing Machine Technician
The Sewing Machine Technician works with materials to craft proprietary medical belts.  This individual will work with the team to assemble belts and finished goods by utilizing sewing machines, workstations and line-assembly operations.    Essential Duties and Responsibilities Assemble medical device components following detailed work instructions and specifications. Assemble subassemblies and finished goods, using sewing machines, fixtures, hand, or power tools. Conduct in-process inspections to ensure assembled devices meet quality standards and specifications Follow all regulatory and company standards, including FDA regulations, ISO 13485, and Good Manufacturing Practices (GMP). Requirements High School diploma or equivalent required. 3-5 years sewing experience. Previous experience in industrial sewing environment or a similar role is preferred. Benefits Meaningful work in a rapidly growing company with opportunity for advancement Directly influence the quality of products and make a difference for patients worldwide Opportunities for professional and personal growth  Pay: $18-$20/hr plus bonus Sentec offers competitive benefits like Medical, Dental, Vision, HSA, FSA, and 401K matching, as well as paid parental leave , a wellness stipend and tuition reimbursement. Sentec emphasizes employee voices and recognizes hard work making it a promising environment for professional growth. Sentec focuses on delivering impactful healthcare products and improving patient care. By choosing a career at Sentec, you’re not just choosing a job – you’re embracing the chance to make a real impact, contributing to the development of innovative medical solutions that support the wellbeing of individuals worldwide.  Sentec is a Swiss-American medical device company specializing in respiratory care. Since its founding in 1999, Sentec utilizes a deep-tech approach that is founded on advanced science and avant-garde technologies for respiratory patients across care areas. Sentec provides healthcare professionals worldwide with non-invasive, continuous monitoring and effective therapeutic solutions.
Sandpoint, ID 83864, USA
$18/hour
Workable
Forklift Drivers Needed (Shipping/Receiving)
Job Title: Forklift Driver Location: Sterling Heights, MI ( 18 ½ mile road) Shifts: 1st (Mon - Fri, Sat/Sun 5 a.m. - 1 p.m. Shipping/Receiving 2nd (Mon - Fri, Sat/Sun 1pm - 9pm- Shipping/Receiving 3rd (Mon - Fri, Sat 9pm - 5am) - Shipping/Receiving Pay: $17.50/hr 1st shift: $17.50/hr 2nd shift: $18.25/hr ($17.50/hr + $0.75/hr premium) 3rd shift: $19.00/hr ($17.50/hr + $1.50/hr premium) Weekly Pay - Direct Deposit or Pay Card After 40 hours: Overtime (1.5x) Job Summary: Forklift Operators will be required to use standard propane powered forklifts primarily assigned to unload materials and supplies necessary for the plant operation; move palletized bagged materials from a conveyor line to the storage yard; load both flatbed and box trucks for shipping using either portable loading ramps or operating off the ground. Requirements Responsibilities: Work safely and responsibly and follow all safety policies and procedures Perform daily equipment checks and minor service maintenance Moving palletized materials throughout the storage facility Installs and re-supplies as necessary rolls of bagging film, rolls of stretch wrap, top sheet, pallets, bottom sheet, labels, and other consumables as needed. Follow shipping instructions and load trucks with proper materials to complete orders Move & stack pallets in the correct storage areas Lift and carry boards between pallets while stacking Align pallet stacks vertically and safely Ensure bags are not damaged during pallet handling Examine bag products to verify conformance to quality standards Perform work according to accepted procedures and practices Change out propane tanks or fill with diesel fuel depending on the type of forklift Keep accurate records of production data Communicate all concerns affecting safety, quality, productivity and the work environment to the Supervisor Other work as required and assigned Benefits Paid Time Off Paid Holidays Shift Premiums Referral Bonuses (up to $6,500!) BCBS Health Insurance Promotions After 40 hrs: Over Time (1.5x)
Sterling Heights, MI, USA
$17/hour
Workable
Production Worker II
Now Hiring – Door Assembly Department $17.00–$17.50/hour | Monday–Friday, 7:00 AM – 3:30 PM (OT as needed) We’re growing and looking for motivated individuals to join our Door Assembly Department. This role involves hands-on work building high-quality doors in a fast-paced manufacturing environment. What You’ll Do: ·         Assemble entry and patio doors using various tools and materials ·         Read and follow measurements using a tape measure ·         Operate hand and power tools safely and effectively ·         Ensure quality standards are met throughout the assembly process ·         Work as part of a team to meet daily production goals Requirements: ·         Must be able to read and use a tape measure accurately ·         Must have reliable transportation to and from work ·         Must be dependable with strong attention to detail ·         Ability to lift up to 50 lbs and stand for extended periods ·         Manufacturing experience is a plus, but not required—we provide training! Schedule: ·         Monday through Friday, 7:00 AM to 3:30 PM ·         Occasional overtime as required If you take pride in quality work and want to be part of a supportive team, apply today to join our Door Assembly Department!       Benefits Health Care Plan (Medical, Dental & Vision) Retirement Plan (401k, IRA) Paid Time Off (Vacation, Sick & Public Holidays)
Berea, OH 44017, USA
$17/hour
Workable
Assembly Technician
New Flyer is North America's heavy-duty transit bus leader and offers the most advanced product line under the Xcelsior® and Xcelsior CHARGE® brands. It also offers infrastructure development through NFI Infrastructure Solutions™, a service dedicated to providing safe, sustainable, and reliable charging and mobility solutions. Further information is available at www.newflyer.com POSITION GOAL:  The purpose of this position is to build or assemble parts that will eventually end up in a New Flyer Metro Transit bus. These parts may include electrical, mechanical, engine and axle finished / sub-assemblies Starting Pay Rate: $20.18 Hourly Rate: ESSENTIAL FUNCTIONS: (list in order of importance) Adhere to all established safety practices and procedures. Must have knowledge of assemblies within specific area. Must be able to work on blueprints, process sheets, and/or written instructions.  Must have working knowledge of hand and air tools.  Must regularly lift and move up to 10 pounds, frequently lift and move up to 25 pounds.  Must be able to bend, stoop, and reach.  Must be able to stand upright and perform tasks at ergonomic worktable.  Employee is regularly exposed to vibration, and occasionally works near moving mechanical parts.  Must be present on the job to perform the assigned duties and be able to work overtime. Able to work effectively with minimal supervision. Meet performance targets set by the company and meet our first-time quality expectations. Test and troubleshoot finished assemblies in all assembly areas. Requirements Job Requirements:   Ability to work effectively in a fast-paced team environment Physical ability to perform repetitive tasks and lift heavy objects if required Benefits WHY JOIN OUR TEAM: Competitive Wages. Benefits: Health, Dental, Vision, 401K. FMLA/Short Term Disability. A continuous learning environment. NFI Group has been named a Manitoba Top Employer for 2020 and this is the tenth since the competition was established in 2007. Employee social committee organizes numerous events throughout the year, including summer barbecues, holiday festivities, sporting events and tournaments, and much more. Ongoing employee development through a variety of in-house training initiatives along with tuition subsidies for courses at outside institutions. OUR WHY:  We exist to move people. Our mission is to design and deliver exceptional transportation solutions that are safe, accessible, e­fficient and reliable.   NFI Group is a leading independent global bus manufacturer providing a comprehensive suite of mass transportation solutions.  News and information are available at www.nfigroup.com, www.newflyer.com, www.mcicoach.com, www.arbocsv.com, www.alexander-dennis.com, www.carfaircomposites.com and www.nfi.parts.
Jamestown, NY 14701, USA
$20/hour
Cookie
Cookie Settings
Our Apps
Download
Download on the
APP Store
Download
Get it on
Google Play
© 2025 Servanan International Pte. Ltd.