Manufacturing Technician for Scientific Equipment Needed (vallejo / benicia)

Eastridge Workforce Solutions is now hiring for Manufacting Techs in the Poway area. Location: Poway, CA Shift: 1st Shift | 5:00 AM – 1:30 PM (Overtime Available) Pay Rate: $22.00 per hour + Overtime *Please simply respond to this advertisement with your resume *I will then reach out to set up a time to chat Job Summary: We are seeking reliable and motivated individuals to join our team as Assembly and Rack Associates. This position is hands-on and fast-paced, ideal for candidates who enjoy working with tools, assembling products, and performing general warehouse tasks. Plenty of overtime is available for those looking to maximize earnings. Key Responsibilities: *Perform assembly of products and components according to specifications. *Load, unload, and organize materials onto racks and designated areas. *Inspect parts for quality and accuracy *Follow safety procedures and maintain a clean work environment. *Assist team members and perform other related duties as assigned. Qualifications: *Previous assembly or warehouse experience preferred, but not required (training provided). *Ability to lift up to 50 lbs and stand for long periods. *Strong attention to detail and willingness to learn. *Reliable and punctual with a strong work ethic. *Flexible to work overtime as needed. *Please simply respond to this advertisement with your resume *I will then reach out to set up a time to chat Eastridge Workforce Solutions is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. We celebrate diversity and are committed to creating an inclusive environment for all employees. Please note that Eastridge is unable to provide visa sponsorship to applicants.

Wantable - Fulfillment Center 5315 S 3rd Street Milwaukee, WI 53207 *This job posting is intended for candidates who reside in the state of Wisconsin. Full-time Monday-Friday 1st Shift hours are 7:00 AM-3:30 PM (starting at $15/per hour) Performance-Based Increases: Start at $15/hr with the ability to make up to $19/hr if exceeding performance initiatives within 90 days. Work in a large and clean fulfillment center where you can spread out and work without being packed in with hundreds of other employees. Wantable is looking for positive and energetic Fulfillment Associates to pick and pack orders and process returns in our fulfillment center. If you are someone who enjoys working in a fast-paced environment, can be on your feet walking all day (or night), and enjoys being able to work individually, we are the place for you! Benefits: • Free coffee in the break room • 50% employee discount • Health, dental, vision and 401k (after a waiting period) • Enjoy listening to music/podcasts during your shift (you must bring your headphones) Summary: The Fulfillment Associate is responsible for picking and packing orders, processing returned orders and assembling boxes for shipping. This position reports to the Fulfillment Center Manager. Primary Responsibilities: • Pick and pack customer orders. • Assemble shipping boxes. • Replenish inventory in picking bins. • Maintain the work area and equipment in an orderly condition. • Process Reverse Shipments in an efficient manner. • Other duties as assigned by Fulfillment Center Leadership. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Daily attendance is necessary. This position requires the employee to be on their feet for the majority of the shift. The employee is occasionally required to sit; climb or balance; and stoop, kneel, crouch, or crawl. The employee must frequently lift and/or move up to 10 pounds and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. Other Duties: Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Requirements • Maintain a positive attendance record. • Ability to communicate effectively with Fulfillment Center Leadership. • Motivation to work with minimal supervision. • Excellent problem-solving ability. • Capacity to work well with others. • Easily adaptable to change in a fast-paced, deadline-driven environment. Benefits • $50 Shoe credit after 90 days, then every 6 months • Free coffee in the breakroom • 50% employee discount • Health, dental, vision and 401k (after a waiting period)

On Premise Products is looking to hire metal preparation positions pint application. 1st shift 7:30 am - 3:30 pm. The applicant is responsible for preparing metal parts and applying powder coat. About Us We are a growing manufacturer located in El Cajon. We offer competitive compensation and paid holidays Essential Functions - Complete prep and application process of powder coating. - Set up and operate variety hand tools. - Perform in process quality assurance activities and inspection to ensure parts and assemblies meet production specifications and standards - Removes minor imperfections by use of mechanical or manual methods according to approved process instructions -Experience with tools, grinders. Experience, and Skills - Must have strong English communication skills to understand verbal and written instructions The Job is all aspects of powder coating: Prep Metal Powder Coat Application Load And Unload Parts Full Time 4. Stand and/or walk for at least 8 hours per day 5. Safely lift, carry, push, and/or pull up to 50 lbs. frequently 6. Safely utilize step stools and ladders up 16 ft. to perform assembly tasks 7. Work in an outdoor (non air conditioned) industrial shop environment

Resource Management Concepts, Inc. (RMC) provides high-quality, professional services to government and commercial sectors. Our mission is to deliver exceptional management and technology solutions supporting the protection and preservation of the people and environment of the United States of America. RMC is hiring for a Junior Inventory Management Specialist to support our customer onsite at NSWC Indian Head, MD.   The selected candidate will be expected to: Perform a wide range of substantive clerical/technical support work. Perform inventory accounting and control records entry and review, demand processing, requisition and re-supply, receipt and release of property, shipments, and management information recoverability. Perform periodic inventories of plant property, materials, and equipment. Gather information to support inventory records, discrepancies, and assist with corrective actions. Process disposal documentation as required, and post status record changes to maintain control of equipment dispositions. Process material receipts; enter data in the inventory control system; enter receiving and shipping documentation; and notify management of discrepancies with maximum supervision. Follow technical written procedures issued by the Federal Government for requisitioning, receiving, and storing supplies, repair parts, and equipment. Requirements A High School Diploma and (2-3) years of general work experience is required. An active DoD Secret clearance is required to start. The applicant selected may be subject to a security investigation and must meet eligibility requirements for access to classified information. Must have working knowledge of Microsoft Office Suite. Must be able to follow technical written procedures issued by the Federal Government. Must maintain a valid state-issued driver's license and be able to drive and operate a vehicle (car, truck, van). Must be able to lift up to 50 lbs. Benefits At RMC, we're committed to your career growth! RMC differentiates itself from other firms through its investment in our employees. We invest our resources to train, certify, educate, and build our employees. RMC can offer you a great place to work with a small company feel and give you the experience, tuition assistance, and certifications that will take your career to the next level. This also includes a competitive paid vacation package with 11 paid federal holidays. Additionally, we also offer high-quality, low-deductible healthcare plans, pet insurance, and a competitive 401K package. Salary at RMC is determined by various factors, including but not limited to location, a candidate's specific combination of education, knowledge, skills, competencies, and experience, as well as contract-specific requirements. The current salary range for this position will be $41,000 to $48,000 (annually). #LI-MB1

• Job type: Full Time • Type: Manufacturing • Salary/wage: $23.00 - $42.00 per hour, based on experience • Overtime: Available • Shifts: Days • Benefits: Great, Competitive Uni-Fab Industries Inc. is looking for the best welders to join a rapidly growing company. We are building a team of highly professional people that are smart, motivated, and that want to grow. Company has internal welding program to help further your knowledge and certify you to an AWS Standard. The entire shop is air-conditioned. Key Job Responsibilities: • Tig Welding complex precision sheet metal • Mig Welding precision sheet metal • Must do own set-ups • Must be able to create fixtures • Must be able to work in a fast paced environment Technical Background: (Required Skillset) • 5 years experience min, TIG and MIG • Understanding of the different materials (CRS, SST, Alum) • Blueprint reading • Welder Certifications are a Plus Required: • Self-motivated, self starter • Own tools • Innovative • Team Player • Communication skills Educational Background: • GED (a plus) • Blueprint reading (a plus)

Harco Fittings is a member of the IPEX group of companies. Our mission is to compete and grow using innovation, differentiation and extraordinary service. Harco Fittings LLC, founded in 1966 in Lynchburg, Virginia is a producer of gasketed joint injection-molded PVC and push-on gasketed joint ductile fittings. Our Harco locations span across seven states in the US and we are looking for new individuals to come be a part of a dynamic and growing team today! We currently have an exciting opportunity as a Fabricator. This role is based in our facility in Janesville, WI and reports to the Plant Manager. The hours are Mo-Fri from 5.30am until 2pm. The starting wage is $21.71 per hour.   Do not miss the opportunity to join a diverse group of people-centric professionals, thought leaders and rapid thinkers, entrepreneurs in spirit and status quo-fighters!   Job Summary Responsible for receiving, inspecting, and preparing parts for fabrication operations. Perform fabrication, assembly, and packaging operations. Principal Responsibilities Fabricate fittings to customer specifications using customized fabricating equipment, hand, power tools, adhesives, and fixtures. Obtain components from stock/production. Set-up equipment to match product requirements. Must be able to work in a team-oriented environment and demonstrate good communication skills. Inspect completed parts. Prepare parts for shipping by placing them in boxes or on pallets. Correctly label all parts and boxes as needed. Visually inspect all incoming pipes, components, and gaskets for defects. Apply 5S and Lean Manufacturing principles. Maintains a safe working environment by following Health, Safety and Environmental Policies and attending training that is provided where required. Maintains a respectful working environment by following Human Resource Policies and attending mandatory training when required. Assist in the coordination, preparation, and execution of year-end inventory. Completing and maintaining reports for managers as required, which may include: Production reports Scrap reports Other duties may be assigned when applicable. Requirements Previous experience in a manufacturing environment is strongly preferred, however, full training will be provided Must be knowledgeable in basic math Detail oriented with excellent analytical and problem-solving skills Must be a self-starter with good interpersonal and verbal communication skills coupled with an eagerness to learn Good team player including with a demonstrated ability to chip in to and foster a positive team environment Working knowledge of Health and Safety practices is helpful. After training, should exhibit an understanding of various types and sizes of pipes. Working Conditions Manufacturing plant environment Requires good mobility and involves considerable routine walking, standing for long periods, bending, and heavy lifting of 50 - 75 lbs. The use of hand tools including heat forming, pulling, belling, caps, reducer, saws, gluing Fast-paced environment where a considerable amount of sensory attention is required Benefits 401K plan with company match Comprehensive Health, Dental, and Vision coverage options Vacation and holidays Set schedule with bi-weekly pay Basic safety equipment (i.e. safety glasses, ear plugs) will be provided Reimburse COBRA costs while transitioning to IPEX benefits   IPEX is committed to providing accommodations for people with disabilities throughout the recruitment process and, upon request, will work with qualified job applicants to provide suitable accommodation in a manner that takes into account the applicant’s accessibility needs due to disability. Accommodation requests are available to candidates taking part in all aspects of the selection process for IPEX jobs. To request an accommodation, please contact HR at HR@ipexna.com. EOE.