Full time installer needed (Sacramento)

Painter Responsibilities: - Prepare surfaces for painting by removing old paint, filling holes, and repairing cracks - Mix, match, and apply paints and other finishes to various surfaces - Use brushes, rollers, or sprayers to apply paint or other finishes - Cover surfaces with drop cloths or masking tape to protect surrounding areas - Fill cracks, holes, and joints with caulk, putty, plaster, or other fillers - Sand and/or scrape off old paint or loose debris from surfaces - Spray custom finishes (lacquer, paint, and custom coatings) - Cleanup work areas and remove materials Frequent lifting and carrying painting equipment, occasional lifting up to 65 lbs. paint cans, pulling, standing, walking, reaching, sitting, kneeling, occasional crawling and reclining, frequent climbing, balancing, pushing, occasional arm rotation, frequent manual and finger dexterity. Hearing warning signals and reading and comprehending safety instructions. Must be able to maintain general safety awareness and avoid hazards commonly present in employee’s work area. Required Qualifications: Must participate in and pass background screening and employment verification. Must keep a clean and professional work area and appearance. Reliable transportation to and from work is required. Two to five years of experience with a reputable painting company or possession of a painting certification from an accredited institution preferred. Must have knowledge of surface preparation procedures, proper use and mixing of paints. Must have the ability to read and understand the Product Data Sheet. Must have the ability to identify paint application requirements and equipment needed for coating application. Must be able to operate high-reach equipment. Must be able to work at heights, in confined spaces, and work any shift. Must be able to access and move around safely; must have the ability to observe differences in color. Must comprehend written and verbal instructions and hear warning signals, read and comprehend safety instructions, regulations, and warnings. Note: This job description is not intended to be all-inclusive. Employees may perform other job duties related to the trade as needed. Job Types: Full-time, Part-time Work Location: Various (Primarily San Diego Area and Coastal Cities) Applicants must submit a verifiable resume for consideration,

WE ARE SEEKING VINYL SIDING CREWS. PREFER LATINO. WE PROVIDE MATERIALS, AND HOUSING IF NEEDED. WEEKLY PAY NEW CONSTRUCTION AND RESIDES CALL OR EMAIL TODAY WORK YEAR AROUND. 800-655-3442

We are a full service structural, ornamental, and architectural steel company. We pride ourselves on a higher standard of safety, quality and performance. Understanding the challenges and knowing what it takes to be successful, we believe our team is what makes that possible! Compensations is dependent upon experience. All Applicants should possess the following: • OSHA 10 minimum or OSHA 30 • Team player mentality • Excellent communication skills • Overtime is available and assigned as needed We offer the following benefits and incentive package: • 100 % Employer paid health, dental and vision insurance • 1 Week paid vacation time and additional elective Holiday pay • Up to 4% 401k match • Company Bonuses • Company events and parties • Elective Profit Sharing • Boot/Clothing Allowance We are a growing company looking to fill the following positions: Ornamental Fabricator/Installers Qualified Candidates should possess the following: • Ornamental fabrication experience, including stairs, handrails, grab rails, small component machining and manufacturing • Experience in layout, reading/understanding shop drawings, weld symbols and welding processes • Distinctive eye for detail, fluent sanding and polishing skills, fluent in drill and countersink operations • Jig fabrication • Field installation experience including attaching to wood and concrete structures and components • Experience with torches • Competent in rigging • Understanding finish materials • Comfortable in shop and field environment • Must have clean driving record or show plan and timeline for establishing • Must be able to set up, diagnose, keep clean and functional assigned welder • Competent in basic shop tools/machines i.e. mag drill, ironworker, grinder, stud guns and shears • Layout and hand tools Ideal Candidates will also possess 1 or more of the following: • GMAW, Hard wire certified • TIG welding experience -mild, stainless and aluminum. • FCAW-G Dual Shield Certified (.045) • Mill and lathe experience • Field layout experience • CAD experience • Telehandler/forklift certification • Scissor Lift Certified • Extended Man Reach Lift Certified • Crane Signal Certified • Fall Protection Certified • Subpart R Certified Compensation is dependent upon experience.

Reno Tahoe Steel Inc. is a full service structural, ornamental, and architectural steel company. We pride ourselves on a higher standard of safety, quality and performance. Understanding the challenges and knowing what it takes to be successful, we believe our team is what makes that possible! All Applicants should possess the following: • Team player mentality • Excellent communication skills • Ability to work in-person We offer the following benefits and incentive package: • 100% Paid health insurance including vision and dental • 1 Week paid vacation time • Up to 4% 401k match • Company Team events • Bonuses • Performance Incentives We are a growing company looking to fill the following position: Structural Steel Erector Qualified Candidates should possess the following: • OSHA10 for Construction required • FCAW 232 or Coreshield 8 Certified • Structural erecting and field welding experience • Fluency in weld fit up, bolting, plumbing and bracing • Ability to read and understand of shop/erection drawings, weld symbols and welding processes • Torch cutting • Qualified in rigging • Comfortable in field environment with personal gear that can handle our variant weather conditions. • Must be able to set up, diagnose, keep clean and functional welders, suitcases and torches. • Layout and hand tools Ideal Candidates will also possess 1 or more of the following: • SMAW 7018 and puddle weld cert preferred but not required • Dual Shield Certified, (.045 and 1/16) preferred but not required • Telehandler/forklift Certified preferred but not required • Scissor Lift Certified preferred but not required • Extended Man Reach Lift Certified preferred but not required • Crane Signal Certified preferred but not required • Fall Protection Certified preferred but not required • Subpart R Certified preferred but not required Compensation is dependent upon experience.

Auto body masker sander

Vickers Automotive is looking for a part time or full technician available immediately. We pride ourselves in providing great customer service and quality repairs to our customers. Looking for an experienced tech that can perform some if not all of the following: .Oil Changes .Brakes .Tune Up .Timing belt & Water Pumps .Engine Replacements .Transmission/Clutch Replacement .Cylinder Head Gasket Replacement .Cooling System Repair & Service .Ability to Diagnose This is only some of the jobs we perform here and is not limited to the list. This is a fast paced high volume shop! Must have own tools and the ability to work clean and well with others. Pay is based on experience with no caps. We provide healthcare at 50% payed for full time employees, paid major Holidays off, and we only work Mon-Fri 8-5:30 no weekends. Email resume ahead of contacting.