Browse
···
Log in / Register

Power Supply Operator

$59.84

Pend Oreille Public Utility District

Ione, WA 99139, USA

Favourites
Share

Description

The purpose of this journeyman level position is to safely perform operational duties related to District powerhouse, dam, pumping and waterway equipment, enabling the highest possible level of generation production, equipment reliability/performance, and personnel safety. Duties assigned will relate to the following equipment: turbines, governors, generators, pumps, motors, heavy and light mobile equipment, air compressors, HVAC equipment, dam structural equipment (including spillway gates, hoists and cranes).  Qualified candidates must have extensive experience in the operation of production/generation equipment and systems. Specific Duties and Responsibilities are: Starts, stops, synchronizes and adjusts voltage, load and power factor of District turbine/generator units and auxiliary equipment. Operates and monitors plant electrical systems. Maintains specified dam flows and water levels. Reads and records instrument data. Accurately computes water flows. Prepares operating reports and maintains station records. Operates and controls low, medium, and high voltage switchgear. This may require the use of hot sticks, insulated gloves, and other safety equipment as required by industry practice and regulation WAC 45. Operates and switches distribution voltage switchgear under the direction of dispatch personnel. Operates heavy lifting equipment, including operation of 100 ton gantry crane for the lifting and adjustment of spillway gates at Box Canyon Dam. Performs structural and equipment inspections of Box Canyon Dam, power plant and switch yard in order to detect failure or impending failure of structures or equipment.  Detection of any abnormality requires the taking of remedial action where possible and proper recording and reporting to responsible individuals.  Works with maintenance personnel to establish clearance requirements.  Certifies and issues clearances and receives clearance releases for authorized work on equipment within realm of responsibility.  Performs required switching and tagging to safely secure equipment for maintenance. Keeps a clear, concise and accurate log of activities during assigned shift to insure that matters of importance are properly conveyed to operators on subsequent shifts. Maintains security of facilities and equipment through observation, use of available surveillance equipment and the proper locking of entry points. Exercises tact, courtesy and diplomacy when interacting with the public in order to affect and maintain a good public image for the District at all times. Requires thorough understanding of Production Lockout Tagout (LOTO) program and distribution clearance program. Will be required to administer LOTO program for Production facilities to safely remove equipment from service for maintenance purposes. Will also be required to operate and clear distribution equipment for the safe switching of equipment for line operations. Operates radio, computer and telephone equipment for the purpose of receiving, sending or relaying information pertinent to maintaining effective operational and maintenance communications within the District. When serving as relief operator, will fill vacated shifts created by other operators personal leave. Will conduct inspections and/or review operations at reservoirs, pumping plants, generating stations, distribution substations and at other District river sites and (or specific equipment) as directed.  When so assigned, will maintain communications with the shift operator at Box Canyon keeping him/her informed of itinerary and change of status of equipment, etc. When assigned the Calispell Power Plant, will start/stop, synchronize, adjust voltage, change jets, open or close needle valves, gate valves, etc., as necessary to assure maximum use of available water from Power Lake.  Will clean equipment and powerhouse, wiping up excess oil, etc.  Will add oil as necessary and grease appropriate fittings.  Will check Power Lake water level and record it as well as other appropriate data in station log and appropriate record form. Trains or assists in the training of apprentice operators by providing guidance and instruction in all aspects of the operator program. Responsible for maintaining positive, cooperative and professional relationships with all District personnel. Assists in the preparation of written standard operating procedures. Performs alone during many shifts and assignments. Must act autonomously, and make decisions in accordance with District policies and procedures. During many working hours, is solely responsible for the operation of District assets, including Box Canyon Dam. Responsible for supervisions of apprentice operators when working on the same shift. Under the requirements of WAC 45, responsible for the safety of personnel working under clearances issued by journey hydro operator. Requirements Vocational/apprenticeship training resulting in journeyman level operator skills that allow the incumbent to fully perform the responsibilities, essential duties and authorities described above. Knowledge of and ability to correctly use appropriate safety practices in a utility setting, including (but not limited to): Lock Out Tag Out (LOTO), confined space entry, first aid/cardio pulmonary resuscitation, including Automated External Defibrillator (AED), etc. Knowledge of the National Electrical Safety Code (NESC) and all applicable Occupational Safety & Health Administration (OSHA) and Washington Industrial Safety and Health Act (WISHA) regulations. Ability to apply logical thinking to diagnose and solve practical problems without supervision, and to comprehend and effectively carry out instructions. Ability to mathematically add, subtract, multiply, and divide; work with decimals and fractions; and understand and calculate measurements.  Ability to read, analyze and comprehend relevant instruction manuals, construction drawings, electrical diagrams, blueprints, schematics, and maps in connection with the essential duties of the position.  Ability to properly prepare required forms and reports.  Ability to communicate well both orally and in writing. Must be able to work the assigned 12-hour rotating shift. Benefits The District offers a competitive benefits package that includes Medical, Dental, Vision, FSA for medical and/or dependent care, HRA VEBA, a variety of life insurance and ADD options, Deferred Compensation (401a & 457b), PERS, Short- & Long-term Disability, and a generous personal leave bank. This position is a non-exempt union role, offering a hourly pay rate of $59.84 per the current collective bargaining agreement.

Source:  workable View Original Post

Location
Ione, WA 99139, USA
Show Map

workable

You may also like

JBPro
Civil Design Engineer
Gainesville, FL, USA
Founded in 1995, JBPro is one of the leading site development design and consulting firms in North Florida. Approaching our fourth decade of service, we remain dedicated to our passion for client advocacy and community development. We prioritize quality work and client advocacy, ensuring we make a positive impact on the communities we serve.   At JBPro, we believe that our greatest strength lies in our people. We are committed to fostering a supportive and inclusive work environment where every employee feels valued and motivated to excel. Our team members are more than just colleagues; they are family.  Join the JBPro family, where your efforts are valued, your development is supported, and your work truly makes a difference.  Position Overview:     As a Civil Design Engineer at JBPro, you will play a pivotal role in focusing on the engineering design aspects of diverse projects. Collaborating within a dynamic team including Production Engineers, Project Managers, and other team members, you will contribute to delivering exceptional results to our clients.   Our Civil Design Engineering role at JBPro offers a broad scope, ideal for individuals eager to fully engage in the design process across multiple projects and clients, including collaborative efforts with other production departments. This pivotal position is dedicated to creating innovative solutions that shape the future of North Florida's infrastructure while providing significant opportunities for professional growth and development. Join us and make a lasting difference in the community through your contributions.  What You’ll Do:  Support the engineering design aspects of various projects, focusing on utilities, grading, drainage, and more, tailored to project scope requirements.  Collaborate with a team including Production Engineers, Project Managers, and others to deliver high-quality results that exceed client expectations.  Coordinate project schedules, deadlines, and deliverables closely with the Project Manager to ensure seamless project execution.  Participate actively in project coordination meetings to maintain alignment with project goals and timelines.  Conduct comprehensive site visits and take photos to capture initial conditions at project inception.  Manage and oversee the work of technicians assigned to the project, ensuring efficient workflow and adherence to project timelines.  Proactively address and communicate any design issues that may impact deadlines or deliverables to the Project Manager.  Facilitate agency coordination and communication, ensuring compliance with regulatory requirements.  Prepare and draft applications, forms, and submittal documents, identifying associated fees and requirements.  Engage in client contact and coordination on an as-needed basis   Coordinate effectively with sub-consultants and associated companies, including Geotechnical, Architecture, Landscape Architecture, and Lighting, to achieve project goals.  Collaborate closely with JBPro's other production departments on mutual project requirements.  Provide construction services and inspections as necessary to support project completion and client satisfaction.  Requirements Bachelor’s degree in civil engineering required.  Minimum of 2 years of experience in civil engineering, demonstrating practical knowledge and project involvement.  Required: Proficiency in CAD software is; experience with Civil 3D is preferred.  Required: EI Certificate, showcasing commitment to professional development.   Ability to effectively incorporate feedback from peers, superiors, and clients to continuously refine and enhance design solutions.  Benefits Competitive Salary  Opportunity for Career Advancement  Medical, dental, and vision insurance  Short and Long-Term Disability Insurance  401K benefits as well as a 3% match with profit sharing  PTO up to 4 weeks depending on years of experience  9 Paid Holidays  Paid Parental Leave  Employee Referral Program 
Negotiable Salary
JBPro
Civil Design Engineer
Gainesville, FL, USA
Founded in 1995, JBPro is one of the leading site development design and consulting firms in North Florida. Approaching our fourth decade of service, we remain dedicated to our passion for client advocacy and community development. We prioritize quality work and client advocacy, ensuring we make a positive impact on the communities we serve.   At JBPro, we believe that our greatest strength lies in our people. We are committed to fostering a supportive and inclusive work environment where every employee feels valued and motivated to excel. Our team members are more than just colleagues; they are family.  Join the JBPro family, where your efforts are valued, your development is supported, and your work truly makes a difference.  Position Overview:     As a Civil Design Engineer at JBPro, you will play a pivotal role in focusing on the engineering design aspects of diverse projects. Collaborating within a dynamic team including Production Engineers, Project Managers, and other team members, you will contribute to delivering exceptional results to our clients.   Our Civil Design Engineering role at JBPro offers a broad scope, ideal for individuals eager to fully engage in the design process across multiple projects and clients, including collaborative efforts with other production departments. This pivotal position is dedicated to creating innovative solutions that shape the future of North Florida's infrastructure while providing significant opportunities for professional growth and development. Join us and make a lasting difference in the community through your contributions.  What You’ll Do:  Support the engineering design aspects of various projects, focusing on utilities, grading, drainage, and more, tailored to project scope requirements.  Collaborate with a team including Production Engineers, Project Managers, and others to deliver high-quality results that exceed client expectations.  Coordinate project schedules, deadlines, and deliverables closely with the Project Manager to ensure seamless project execution.  Participate actively in project coordination meetings to maintain alignment with project goals and timelines.  Conduct comprehensive site visits and take photos to capture initial conditions at project inception.  Manage and oversee the work of technicians assigned to the project, ensuring efficient workflow and adherence to project timelines.  Proactively address and communicate any design issues that may impact deadlines or deliverables to the Project Manager.  Facilitate agency coordination and communication, ensuring compliance with regulatory requirements.  Prepare and draft applications, forms, and submittal documents, identifying associated fees and requirements.  Engage in client contact and coordination on an as-needed basis   Coordinate effectively with sub-consultants and associated companies, including Geotechnical, Architecture, Landscape Architecture, and Lighting, to achieve project goals.  Collaborate closely with JBPro's other production departments on mutual project requirements.  Provide construction services and inspections as necessary to support project completion and client satisfaction.  Requirements Bachelor’s degree in civil engineering required.  Minimum of 2 years of experience in civil engineering, demonstrating practical knowledge and project involvement.  Required: Proficiency in CAD software is; experience with Civil 3D is preferred.  Required: EI Certificate, showcasing commitment to professional development.   Ability to effectively incorporate feedback from peers, superiors, and clients to continuously refine and enhance design solutions.  Benefits Competitive Salary  Opportunity for Career Advancement  Medical, dental, and vision insurance  Short and Long-Term Disability Insurance  401K benefits as well as a 3% match with profit sharing  PTO up to 4 weeks depending on years of experience  9 Paid Holidays  Paid Parental Leave  Employee Referral Program 
Negotiable Salary
New Flyer
Production Team Lead - 1st Shift
St Cloud, MN, USA
New Flyer is proud to be North America's leading manufacturer of heavy-duty transit buses, offering cutting-edge vehicle solutions under the Xcelsior® and Xcelsior CHARGE® brands. We are committed to delivering innovative and sustainable transportation solutions that enhance mobility and community accessibility. POSITION SUMMARY As a Team Lead at New Flyer, you will take on a pivotal role in supervising and guiding a dedicated team within the production environment. Your leadership will be essential in ensuring operational efficiency and maintaining high standards of quality. This position is Monday through Friday; 6:30am - 3pm. Rate of pay is $35.75 per hour. WHAT YOU WILL DO: Lead and supervise daily activities of the team to meet production targets. Ensure all team members adhere to safety protocols and quality standards. Implement best practices and company policies to enhance workflow and productivity. Facilitate training and development opportunities for team members to improve skill sets. Monitor production processes, identify issues, and recommend solutions. Foster a positive working environment that encourages teamwork and employee engagement. Maintain accurate documentation of production and labor data. Communicate effectively with cross-functional teams and management. Participate in continuous improvement initiatives to enhance operational efficiency. Requirements WHAT YOU NEED TO BE SUCCESSFUL: Proven and consistent experience in a supervisory or team leader role within a manufacturing environment. High school diploma or equivalent Strong leadership abilities with excellent interpersonal and communication skills. Ability to read and interpret blueprints and technical documents. Knowledge of safety regulations and quality control processes. Proficient in Microsoft Office Suite and production management software. Detail-oriented, organized, and capable of managing multiple priorities. Demonstrated problem-solving skills and a proactive approach to addressing challenges. Benefits 401k Matching up to 6% Competitive Health Insurance (BCBS) Dental Insurance (Employer paid through Delta Dental) Vision Insurance (Employer Paid through VSP) Paid time off Vacation accrual Employee assistance program Short/Long Term Disability Benefits 13 Paid Holidays $200 yearly Steel Toe allowance $275 Prescription Safety Glass allowance (2 years)
$35.75
BE Power Equipment
Production Associate - Manufacturing/Fabrication
Decaturville, TN 38329, USA
BE Power Equipment Inc., North America’s fastest growing manufacturer of power equipment, is adding a Production Associate to our branch location in Decaturville, TN. BE is a leading manufacturer of pressure washers, air compressors, generators and water pumps serving industrial markets in over 30 countries worldwide. We are a third-generation family-owned business that is focused on designing quality products and delivering exceptional service. If you are a hardworking, mechanically inclined person, who is goal orientated with a positive attitude, this might be the position for you! What you’ll do: Build, assemble, test and package power equipment. Use power tools and equipment in a safe and professional manner. Meet individual and production deadlines daily. Keep your work area clean and presentable. Follow company safety and quality guidelines. Requirements Who you are: You have previous warehouse or production experience. You have a strong mechanical aptitude and experience with engines is an asset. You are able to learn and apply new skills quickly. You are hardworking, physically fit, energetic and motivated. You are able to lift up to 50+lbs on a regular and repetitive basis. You can speak and write fluently in the English language. You are reliable and show up to work when scheduled. To you, details matter! Other details: The successful candidate must have reliable transportation, as the location is not on a regular bus route. Applicants must be available to work overtime occasionally. You have and are able to wear steel toe safety boots daily. All applicants must be legally able to work in the USA. Shift timing: Monday -Thursday 6:00am to 4:30pm. Benefits Why work at BE? Competitive wage (starts at $17/hr) and total compensation package commensurate with experience. Group medical, dental & vision benefits, life insurance coverage. Paid time off from work. Training & development opportunities. Strong culture to promote from within. Modern, well-equipped environment with excellent staff facilities. Regular team building & social events. We appreciate all interest in this opportunity and will be contacting only those candidates with the required skillset and experience.
$17
BE Power Equipment
Production Associate - Manufacturing/Fabrication
Decaturville, TN 38329, USA
BE Power Equipment Inc., North America’s fastest growing manufacturer of power equipment, is adding a Production Associate to our branch location in Decaturville, TN. BE is a leading manufacturer of pressure washers, air compressors, generators and water pumps serving industrial markets in over 30 countries worldwide. We are a third-generation family-owned business that is focused on designing quality products and delivering exceptional service. If you are a hardworking, mechanically inclined person, who is goal orientated with a positive attitude, this might be the position for you! What you’ll do: Build, assemble, test and package power equipment. Use power tools and equipment in a safe and professional manner. Meet individual and production deadlines daily. Keep your work area clean and presentable. Follow company safety and quality guidelines. Requirements Who you are: You have previous warehouse or production experience. You have a strong mechanical aptitude and experience with engines is an asset. You are able to learn and apply new skills quickly. You are hardworking, physically fit, energetic and motivated. You are able to lift up to 50+lbs on a regular and repetitive basis. You can speak and write fluently in the English language. You are reliable and show up to work when scheduled. To you, details matter! Other details: The successful candidate must have reliable transportation, as the location is not on a regular bus route. Applicants must be available to work overtime occasionally. You have and are able to wear steel toe safety boots daily. All applicants must be legally able to work in the USA. Shift timing: Monday -Thursday 6:00am to 4:30pm. Benefits Why work at BE? Competitive wage (starts at $17/hr) and total compensation package commensurate with experience. Group medical, dental & vision benefits, life insurance coverage. Paid time off from work. Training & development opportunities. Strong culture to promote from within. Modern, well-equipped environment with excellent staff facilities. Regular team building & social events. We appreciate all interest in this opportunity and will be contacting only those candidates with the required skillset and experience.
$17
ODORZX INC.
Operations Manager (carwash/detailing) multi locations $55k to$65k DOE AUS
Austin, TX, USA
We are currently seeking an Operations Manager to become an integral part of our team! You will be responsible for multiple locations in Austin and San Antonio. You will perform a variety of tasks including managing labor, daily productivity goals, quality control, and daily/weekly reports. You will also identify and document vehicle conditions while promoting a safe and efficient working environment. Essential duties and responsibilities will vary. Responsibilities: Clean interior and exterior of vehicles Operate various equipment to clean interior of vehicle to assigned standards Keep accurate record keeping off all work performed Work independently and within a team environment Develop processes and standards to maximize productivity and safety Continuously meet processing and standardization minimums Maintain high level relationship with clients Monitor P&L, labor costs, and overall efficiency Drive team member engagement, high level of productivity, and accountability for team Create and execute procedures to maintain stability and maximum output of productivity Build strong client relationships to create trust, dependability, and accountability Requirements Qualifications: Previous experience as an automotive technician, detailer, or other related fields preferred Microsoft office or similar experience required Manager Experience REQUIRED Knowledge of various cleaning equipment Flexibility to handle multiple tasks in an organized manner Deadline and detail-oriented Ability to stand, walk, and bend while working outdoors in all types of weather conditions Professionalism, Accountability, and Ownership Must be able to pass following insurance requirements: Must be at least 18 years old • Must have 1 (one) year of experience handling similar job responsibilities • Must have prior driving experience in various vehicles (trucks, vans, cars) • Must have a current and valid driver's license with no moving violations and/or at-fault accidents on driving record in the past 3 years • Must be authorized to work in the United States. • Must have reliable means of transportation ODORZX is a rapidly growing company in Austin, TX with unlimited growth opportunities. Possible opportunities include full-time (F/T) Vehicle Service Technicians, Vehicle Service Supervisors, and Operations Managers. Benefits Full Time Benefits Include: Vacation Time 401k With Match Medical Benefits (Medical, Dental, Vision) Sick Time Personal Days Company Paid Holidays Company Paid Car for traveling and jobs (Gas, Insurance) Company Paid Travel (Job Specific) Employee Referral Program Retention Bonus (Job Specific) Quarterly Bonus (Percentage of Base Pay) Rapid Advancement Opportunities
Negotiable Salary
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.