CDL A OTR Truck Driver 65cpm $2000+ per week $ great pay ! (Birmingham, AL)

Hiring for the following positions as soon as possible. Located in the West and South Tulsa Areas. Please send resume by responding to this ad, and/or please come in to interview M-Th 9:00am-4:30pm, walk ins welcome. ✔Sandblaster- Experience sand blasting on metals, to prepare for painting. Ideal candidate would have recent experience in this field. Pre-Paint/Sandblaster-Prepare metal parts for sandblasting $18.00-$20.00 Depending on experience, M-Th 7:00am-5:30pm with Friday OT ✔Material Handler-Previous experience working in a mfg warehouse, position will require using computers, inventory, driving forklift with oversized items inside and outside. M-Th 7:00am-5:30pm with Friday OT $18.00-$20.00 ✔Tube Roller-Experience running a machine that rolls sheets of metal to create tubes for heat exchangers. Load sheet metal into the machine and unload finished product. Required to use overhead cranes when needed. Will be lifting up to 50lbs or move, bend stand and stoop down as required. $20.00-$23.00+ Depending on experience. ✔Shop Helper- Previous fabrication shop and/or assembly experience setting up heat exhangers. Assemble heat exchangers per prints, use overhead crane,tape measure, assemble fans, connect frame using all types of hand tools.These positions do require ability to bend, stand and stoop over the course of the day. Ability to lift up to 50lbs as needed. Pay: $17.00 hourly Radial Arm Drill Operator -Previous experience running a radial arm drill, Will be required to set up and operate radial arm drill such as boring, reaming, and tapping placing holes into metal parts for heat exchangers. $20.00-$23.00 to start Hours: M-F 6:00am-2:30pm, Overtime as required! Resumes can be send by responding to this ad. Please come in to interview for these positions at Oklahoma Staffing Specialists 5649 S. Mingo Rd. Ste A M-Th 9:30am-4:00pm.

Hiring for the following positions as soon as possible. Located in the West and South Tulsa Areas. Please send resume by responding to this ad, and/or please come in to interview M-Th 9:00am-4:30pm, walk ins welcome. ✔Sandblaster- Experience sand blasting on metals, to prepare for painting. Ideal candidate would have recent experience in this field. Pre-Paint/Sandblaster-Prepare metal parts for sandblasting $18.00-$20.00 Depending on experience, M-Th 7:00am-5:30pm with Friday OT ✔Material Handler-Previous experience working in a mfg warehouse, position will require using computers, inventory, driving forklift with oversized items inside and outside. M-Th 7:00am-5:30pm with Friday OT $18.00-$20.00 ✔Tube Roller-Experience running a machine that rolls sheets of metal to create tubes for heat exchangers. Load sheet metal into the machine and unload finished product. Required to use overhead cranes when needed. Will be lifting up to 50lbs or move, bend stand and stoop down as required. $20.00-$23.00+ Depending on experience. ✔Shop Helper- Previous fabrication shop and/or assembly experience setting up heat exhangers. Assemble heat exchangers per prints, use overhead crane,tape measure, assemble fans, connect frame using all types of hand tools.These positions do require ability to bend, stand and stoop over the course of the day. Ability to lift up to 50lbs as needed. Pay: $17.00 hourly Radial Arm Drill Operator -Previous experience running a radial arm drill, Will be required to set up and operate radial arm drill such as boring, reaming, and tapping placing holes into metal parts for heat exchangers. $20.00-$23.00 to start Hours: M-F 6:00am-2:30pm, Overtime as required! Resumes can be send by responding to this ad. Please come in to interview for these positions at Oklahoma Staffing Specialists 5649 S. Mingo Rd. Ste A M-Th 9:30am-4:00pm.

Hiring for the following positions as soon as possible. MFG Experience, all great companies! *Please send resume by responding to this ad, and/or please come in to interview M-Th 9:00am-4:30pm, walk ins welcome. ✔Warehouse-Computer Experience-$18.00-$20.00 M-Th 6:30am-5:00pm with OT on Friday ✔Warehouse-M-Th $18.00-$20.00 6:00am-4:30pm Friday and Saturday for OT as required Forklift ✔Entry Level layout/Punch Press-$18.00-$19.00 6:00am-4:30pm Friday and Saturday for OT as required Forklift ✔Warehouse-M-Th $18.00-$20.00 6:00am-4:30pm Friday and Saturday for OT as required Forklift ✔Sandblaster- $18.00-$20.00 M-Th 6:30am-5:00pm with OT on Friday ✔Tube Roller Machine Operator- 20.00-23.00+ DOE Hours: M-F 6:00am-4:30pm, Saturday as required. ✔Mechanical Assembly/Shop Helpers-$17.00hr Hours: M-F 6:00am-4:30pm, Saturday as required. ✔Radial Arm Drill Operator -$20.00-$23.00 Hours: M-F 6:00am-4:30pm, Saturday as required. Resumes can be send by responding to this ad. Please come in to interview for these positions at Oklahoma Staffing Specialists 5649 S. Mingo Rd. Ste A M-Th 9:30am-4:00pm.

Experienced Vessel Welder This position starts around $22-24$ Per hour depending on their weld test performance. The test will be a 3G plate test Mig and flux core open root. Currently working 40 hrs. a week. 6am – 2:30pm. APPLY IN PERSON AT: 918-742-5300 LLOYD RICHARDS PERSONNEL 4619 S. HARVARD AVE SUITE 105 TULSA, OK 74135 BRING RESUME, DRIVERS LICENSE AND SOCIAL SECURITY CARD TO APPLY FROM 9:00AM-3:30PM

Material Handler/Forklift - West Tulsa Steel company 6:00am-4:30pm work outside and inside moving steel structures in and out of buildings $17 hr. Vessel Welder $22-$24 hr. 3G Plate Test Mig, Fluxcore, Open root. 40 Hrs a week 6:00am-2:30pm Monday-Friday. West Tulsa Tig/Fitter Welder Vertical and Flat, Aluninum and Stainless Must be able to Fit and Weld High Frequency Tig Welder $25 hr. Day shift West Tulsa Setting Machine Operator $16-$17 Kiln Car Repair , must be able to weld mig.$16-$17 Brick Quality Control $17-$18 Brick Packager $16.50 Utility Worker - $16 Wood Craters in the Catoosa area: Day and Night shifts. Must be able to read tape measure and have carpentry abilities. Use nail guns, saws, staple guns. Day shift $13.75 hr. Night shift $14.75 hr. FELONY FRIENDLY. Experienced Structural Welders in West Tulsa. Weld test Mig, Fluxcore. The test is flat visual clean bead. No bend or x-ray. Company builds emissions units. Currently working 40 hours a week 6:00am-2:30pm. MUST HAVE STABLE WORK HISTORY. Shipping/Material Handler $17 in West Tulsa Steel Company SHOP HELPER in West Tulsa, Grinding, forklift and cycle counting 6am-4:30pm $15 hr. 3 Year Exp. Mechanical/Electrical Maintenance Tech $25.00 for machinery, repair, motors, gears, conveyers, switches, rewiring, hydraulics, pneumatics Day Shift. Night Shift Quality Inspector Metal Parts $18-$20 hr. Experienced QC Inspector to check parts coming off of laser, plasma and press brake tables. Must read mics and calipers, tape measure with 16th. Read blueprints. Work hours 7:00am-3:30pm Will train on day shift and eventually go to night shift. Burner and Fuel Mechanic $24-$30 hr. West Tulsa 8am-5:00pm No Violent Felonies for 5 years. Must be able to rig hoist and operate gantry crane. Must have experience with threaded pipe. Must be mechanically inclined and use hand tools and power tools. Must be able to work independently. Must have troubleshooting and problem solving skills. Must be able to use measuring equipment tools. Background check. Have good communication skills, Good attention to detail troubleshooting and problem solver. Willingness to rotate into different tasks and responsibilities. Prior combustion ex. Large Burner exp. Previous fuel skid/gas train exp. Wiring experience. Perform any combo of tasks involved in fabrication, manufacturing, assembly, testing, inspecting, packaging large combustion burners and fuel skids. be able to lift 50lbs. 7:30am-5:00pm Monday-Friday. Metal Finishers 2 years experience in finishing products. Will be grinding, buffing and sanding parts. Looking for someone that has worked in autobody shop or welders helper, or drywall. $18-$21.00 hr. Depending on experience. 6am-4:30pm, No Violent Felonies. 2 Year Exp. CNC Mill - CNC 3 axis vertical mill, fanuc controls, understands GD and T, Setting tool heights and work offsets, Vocational school a plus. Using a edge finder, Read tape measure, lift 40lbs. Need forklift and overhead experience. $18-$24 hr. 5am-4:30pm Monday-Friday, 1/2 day on Saturdays. EXP. PRESS BRAKE OPERATORS $18-$22 HR, FORKLIFT PREVENTIVE MAINTENANCE - Will change oil and gas up. clean up equipment. Make sure there is inventory of parts for mechanics to repair the forklifts Exp. Concrete Workers Must read tape measure. $16 hr East Tulsa MATERIAL HANLDERS SHIPPING/RECIEVING $17+ Metal Scrap Yard Worker $15 will receive metal and sort into different metal bins. North Tulsa CNC Helper $15-$16 hr. Must have overhead crane and forklift exp. Will be loading metal on tables for cutting, cleaning metal shavings off of CNC table. 5:00am-4:30pm Exp. Bilingual Warehouse Worker $14 North Tulsa unload and load electrical/mechanical appliance parts. Shipping Helper Night Shift 3pm-11pm - North Tulsa - 45-50 hrs a week. $17-$18 hr. Forklift and overhead crane a plus. Will be packaging products when it comes out of production. staging loads to be shipped for next day. Grease and Oil Packagers Night Shift 2:30-10:30pm $16 hr. 6:00am-4:30pm. Will fill cartridges with grease, like a caulking gun. Panel Technician $19-$20 hr. Monday-Thursday 6:00am-4:30pm - Assembles and installs electrical control panels assemblies as well as device wiring, Use electric air power tools to drill grind. as well as fit parts together to form a finished final assembly. Position component parts according to material and blueprint list. Crimp wire lugs on the end using manual crimpers and strippers. Wire looms need to be neat and wiring must be accurate. Point to Point wiring diagrams used to install all wiring. Read blue[rings and electrical codes and use multimeter to test control panels. Sand Springs Receptionist $18-$19 hr. Word, Excel skills answering phones, checking in visitors opening to gate to let guests in. Daily nail, Accepting deliveries and maintaining clean breakroom. FLUXCORE WELDERS DAY SHIFT $22 HR. VERTICLE TEE PLATE, VERTICAL 1" BEVELED TEST, GRIND BACK AND FILL IN. X-RAY, BEND TEST. APPLY IN PERSON AT LLOYD RICHARDS PERSONNEL TAKE APPLICATIONS MONDAY-FRIDAY 9:00AM-3:30PM LLOYD RICHARDS PERSONNEL 4619 S. HARVARD AVE. SUITE 105 TULSA, OK 74135 BRING RESUME, DRIVERS LICENSE AND SOCIAL SECURITY CARD TO APPLY.

LEAD SHIPPING AND RECEIVING- $22.00-$24.00 hr. Have experience Lead/Supervisor role. Must be able to do Bill of Ladings, Packing slips, paperwork and computer, drive forklifts, overhead cranes. 5:00am-3:30pm Monday-Saturdays. West Tulsa Experienced CNC Press Brake 1st shift 5:00am-1:39pm Monday-Friday $20-$24 hr. to start. Must be able to do own set-ups. Experienced Laser Operator, will train someone with metal manufacturing experience. Mechanically inclined will train on days move to nights. $17.00 hr. Grinder, finishing deburr, polishing/buffing parts.West Tulsa $15.00 hr. 6:00am-4:30pm CNC MACHINIST -2 Yrs. Exp. a must. Mill and Lathe Fluent in G-Codes and editing. Hass Exp. is required. They have Haas Vf11 and VF9 machines. Must be able to load machines, set up and run to prints. Night Shift 2:00pm-12:45am Material Handler/Forklift - West Tulsa Steel company 6:00am-4:30pm work outside and inside moving steel structures in and out of buildings $17 hr. Pipe Welder Code Fitter - Tig Pipe Welder X-ray, Test 2" schedule 80, 6g Tig root pass, fill and cap. $25-$30 hr. 6:00am-4:30pm Vessel Welder $22-$24 hr. 3G Plate Test Mig, Fluxcore, Open root. 40 Hrs a week 6:00am-2:30pm Monday-Friday. West Tulsa Tig/Fitter Welder Vertical and Flat, Aluninum and Stainless Must be able to Fit and Weld High Frequency Tig Welder $25 hr. Day shift West Tulsa Setting Machine Operator $16-$17 Kiln Car Repair , must be able to weld mig.$16-$17 Brick Quality Control $17-$18 Brick Packager $16.50 Utility Worker - $16 Wood Craters in the Catoosa area: Day and Night shifts. Must be able to read tape measure and have carpentry abilities. Use nail guns, saws, staple guns. Day shift $13.75 hr. Night shift $14.75 hr. FELONY FRIENDLY. Experienced Structural Welders in West Tulsa. Weld test Mig, Fluxcore. The test is flat visual clean bead. No bend or x-ray. Company builds emissions units. Currently working 40 hours a week 6:00am-2:30pm. MUST HAVE STABLE WORK HISTORY. Shipping/Material Handler $17 in West Tulsa Steel Company SHOP HELPER in West Tulsa, Grinding, forklift and cycle counting 6am-4:30pm $15 hr. 3 Year Exp. Mechanical/Electrical Maintenance Tech $25.00 for machinery, repair, motors, gears, conveyers, switches, rewiring, hydraulics, pneumatics Day Shift. Night Shift Quality Inspector Metal Parts $18-$20 hr. Experienced QC Inspector to check parts coming off of laser, plasma and press brake tables. Must read mics and calipers, tape measure with 16th. Read blueprints. Work hours 7:00am-3:30pm Will train on day shift and eventually go to night shift. Burner and Fuel Mechanic $24-$30 hr. West Tulsa 8am-5:00pm No Violent Felonies for 5 years. Must be able to rig hoist and operate gantry crane. Must have experience with threaded pipe. Must be mechanically inclined and use hand tools and power tools. Must be able to work independently. Must have troubleshooting and problem solving skills. Must be able to use measuring equipment tools. Background check. Have good communication skills, Good attention to detail troubleshooting and problem solver. Willingness to rotate into different tasks and responsibilities. Prior combustion ex. Large Burner exp. Previous fuel skid/gas train exp. Wiring experience. Perform any combo of tasks involved in fabrication, manufacturing, assembly, testing, inspecting, packaging large combustion burners and fuel skids. be able to lift 50lbs. 7:30am-5:00pm Monday-Friday. Metal Finishers 2 years experience in finishing products. Will be grinding, buffing and sanding parts. Looking for someone that has worked in autobody shop or welders helper, or drywall. $18-$21.00 hr. Depending on experience. 6am-4:30pm, No Violent Felonies. 2 Year Exp. CNC Mill - CNC 3 axis vertical mill, fanuc controls, understands GD and T, Setting tool heights and work offsets, Vocational school a plus. Using a edge finder, Read tape measure, lift 40lbs. Need forklift and overhead experience. $18-$24 hr. 5am-4:30pm Monday-Friday, 1/2 day on Saturdays. EXP. PRESS BRAKE OPERATORS $18-$22 HR, FORKLIFT PREVENTIVE MAINTENANCE - Will change oil and gas up. clean up equipment. Make sure there is inventory of parts for mechanics to repair the forklifts Exp. Concrete Workers Must read tape measure. $16 hr East Tulsa MATERIAL HANLDERS SHIPPING/RECIEVING $17+ Metal Scrap Yard Worker $15 will receive metal and sort into different metal bins. North Tulsa CNC Helper $15-$16 hr. Must have overhead crane and forklift exp. Will be loading metal on tables for cutting, cleaning metal shavings off of CNC table. 5:00am-4:30pm Exp. Bilingual Warehouse Worker $14 North Tulsa unload and load electrical/mechanical appliance parts. Shipping Helper Night Shift 3pm-11pm - North Tulsa - 45-50 hrs a week. $17-$18 hr. Forklift and overhead crane a plus. Will be packaging products when it comes out of production. staging loads to be shipped for next day. Grease and Oil Packagers Night Shift 2:30-10:30pm $16 hr. 6:00am-4:30pm. Will fill cartridges with grease, like a caulking gun. Panel Technician $19-$20 hr. Monday-Thursday 6:00am-4:30pm - Assembles and installs electrical control panels assemblies as well as device wiring, Use electric air power tools to drill grind. as well as fit parts together to form a finished final assembly. Position component parts according to material and blueprint list. Crimp wire lugs on the end using manual crimpers and strippers. Wire looms need to be neat and wiring must be accurate. Point to Point wiring diagrams used to install all wiring. Read blue[rings and electrical codes and use multimeter to test control panels. Sand Springs Receptionist $18-$19 hr. Word, Excel skills answering phones, checking in visitors opening to gate to let guests in. Daily nail, Accepting deliveries and maintaining clean breakroom. FLUXCORE WELDERS DAY SHIFT $22 HR. VERTICLE TEE PLATE, VERTICAL 1" BEVELED TEST, GRIND BACK AND FILL IN. X-RAY, BEND TEST. APPLY IN PERSON AT LLOYD RICHARDS PERSONNEL TAKE APPLICATIONS MONDAY-FRIDAY 9:00AM-3:30PM LLOYD RICHARDS PERSONNEL 4619 S. HARVARD AVE. SUITE 105 TULSA, OK 74135 BRING RESUME, DRIVERS LICENSE AND SOCIAL SECURITY CARD TO APPLY.