Principal Controls Engineer

Install, connect, test, troubleshoot, and maintain electrical and mechanical systems Test and maintain electronic controls for machinery Test and assess motors, transformers, generators, electronic controllers on machine tools Perform and document preventative maintenance by periodically inspecting equipment, then locating and correcting problems before breakdowns occur Advise management of and make repairs to equipment in timely manner to minimize safety hazards, lost time, and excessive costs Replace items such as circuit breakers, fuses, switches, electrical components or wires Troubleshoot, and repair or replace mechanical components of our equipment as necessary. Use hand tools, power tools, and testing equipment in a safe and productive manner Set, hook up, and test equipment prior to startup of a given project, disconnect upon project completion May be required to perform additional duties as deemed necessary by supervision for the completion of the job in a safe and timely manner All of the above requirements shall be completed in a safe and efficient manner so as not to cause injury to self or others, or damage to the equipment Requirements At least 1 year of electrical experience Ability to read and interpret construction drawings, specifications, and blueprints. Experience using standard electrician equipment (meters, gauges, hand tools etc.). Strong understanding of safety regulations and protocols in a marine environment. Excellent troubleshooting and problem-solving skills. Must be able to pass a 10-panel drug screen and background check Benefits CTS, LLC offers a comprehensive benefit packet to eligible employees. Eligible employees may enroll in: Health Dental Vision Voluntary Life/Voluntary AD&D Short-Term Disability Long-Term Disability Hospital Indemnity Accident Critical Illness 401k Safety and responsible work practices are of paramount importance at CTS and are woven into the fabric of everything we do. We are committed to employee safety & development, the protection of the environment and the communities where we operate. We are ready to be a partner in your career success! Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform essential job functions. Craft and Technical Solutions, LLC has a consistent policy that requires an online application to be completed before we can further consider you as an applicant for this position. CTS is an EOE AA M/F/Vet/Disability Job Type: Full-time Pay: From $28.00 - $35.00 per hour

Join Our Team Position: 3D CAD Designer (SketchUp Expert) Are you a creative and skilled 3D designer with a passion for turning ideas into reality? We are looking for a talented individual to join our dynamic team! Key Responsibilities: Use SketchUp to create precise 3D models and technical drawings for our projects. Collaborate with engineers and designers to visualize complex designs. Translate concepts into detailed, manufacturable models. Ensure designs meet both aesthetic and technical requirements. Troubleshoot and refine models for production. Requirements: Proficiency in 3D CAD software (must be highly skilled in SketchUp). Ability to work efficiently and meet deadlines. Strong attention to detail and problem-solving skills. Prior experience in 3D modeling or related design fields is a plus. Competitive salary and benefits. Creative and collaborative work environment. Opportunities for professional growth and development. Work on exciting, innovative projects. If you have the skills to bring ideas to life in 3D and want to be part of a forward-thinking team, we want to hear from you! Apply Now! Send your resume and portfolio (This is a full time in office position, no remote work)

New Flyer, the leading manufacturer of heavy-duty transit buses in North America, is excited to announce an opening for a Manufacturing Engineering - Electrical role on our 2nd shift team. The successful candidate Support all manufacturing engineering activities within assigned manufacturing cell(s) including implementing and facilitating lean manufacturing initiatives, implementing ECO’s, assigning inventory locations, conducting contract reviews, creating shop floor instructions, evaluating standards and completing capital and facility upgrades. Rate of pay will be $70,000 to $75,000. KEY RESPONSIBILITIES: Provide manufacturing engineering support and services within assigned manufacturing cell(s). Provide support as the acting Cell Leader in the Cell Leader absence.  Duties are as outlined in the Cell Leader job description. Work effectively as a cell team member to ensure operational metrics are achieved and any remedial action is actively pursued. Maintain current updates on manufacturing engineering related tasks on the manufacturing cell log. Represent manufacturing engineering within assigned cells at the daily cell meetings and weekly plant metrics meetings. Review relevant engineering change orders (ECOs) within assigned cells or assigned option groups and support all aspects of production implementation. Assign default locators to all parts within assigned manufacturing cells. Create shop floor instructions and hot sheets and train the necessary personnel on those standards. Update and maintain layouts (plant & cell layouts and inventory, housekeeping, emergency, & security maps etc.) Specify and facilitate capital and equipment upgrades, installations or modifications. Implement and facilitate lean manufacturing initiatives (5S, value stream mapping, set-up reduction etc.) Promote an environment of continuous improvement and team work. Lead or participate in SWAT team meetings, ensuring that necessary action is taken between cross-functional groups to resolve issues. Conduct process observations to ensure that assigned time standards are fair and consistent. Validate routings and submit and implement routing change requests to process planning where appropriate. Conduct contract reviews prior to contract start to ensure production preparedness per SR as assigned.  This review conducted as outlined in the New Flyer Work Instruction – Manufacturing Readiness Assessment.  Participate in Material Review Board (MRB) meetings as assigned, to assist with the disposition of non-conforming materials. Check engineering documents, coordinate Electrical Checkout Procedures with production staff, basic electrical troubleshooting with Electricians, Instructions to Service, Shop Floor Instructions and other documents as authorized. Initiate engineering change requests (ECRs) where appropriate. Participate in internal and outside supplier certifications and audits, as required. Requirements Bachelor’s degree in electrical engineering or a related field. Strong understanding of electrical manufacturing processes and quality control standards. Demonstrated experience with lean manufacturing principles and methodologies. Excellent problem-solving abilities and analytical skills. Strong communication and interpersonal skills for effective collaboration with diverse teams. Ability to thrive in a fast-paced, dynamic manufacturing environment. Availability to work the 2nd shift, 4:00 PM to 2:30 AM Monday through Thursday with flexibility for additional hours if required. Benefits 401k Matching up to 6% Competitive Health Insurance (BCBS) Dental Insurance (Employer paid through Delta Dental) Vision Insurance (Employer Paid through VSP) Paid time off Vacation accrual Employee assistance program Short/Long Term Disability Benefits 13 paid Holidays Take a look at the exciting work you can be a part of!  NFI Group | We Move People - YouTube  

(We work with wood not metal we are willing to train but some sort of 3d modeling software experience is a must) Cnc Programmer Job Summary Our manufacturing company is seeking a CNC router Programmer with experience programming 3- and 5-axis CNC mills. You will develop new CNC programs for production runs or modify existing programs for different machines. During the manufacturing process, you will perform quality checks with the machine operator to ensure the program is producing parts according to specifications, making manual adjustments if necessary. You will also work with the engineers to look for product modifications that might reduce the amount of material or fabrication time. Although no formal education is required, applicants should be familiar with the computer-aided design programs like Mastercam, SketchUp, Fusion 360, solidworks, Maestro, Woodwop, Biesse, Homag SCM Routech, Onsrud, Komo, Thermwood or other 3d modeling software Cnc Programmer Duties and Responsibilities Develop CNC programs for production runs Analyze drawings to determine dimensions and to choose cutting tools, machine speeds, and feed rates Modify existing programs for different machines Maintain tooling database Make manual program adjustments as necessary Troubleshoot issues during the manufacturing process Cnc Programmer Requirements and Qualifications High school diploma or GED certificate Completion of a technical or associate degree program a plus Experience programming 3- and 5-axis CNC mills Basic math skills Wood working, custom Millwork cabinet shop experience is a plus Polish, Russian, Ukrainian or Spanish is plus

H&H is offering an exciting opportunity for an Electrical Designer in our Annapolis, Maryland Office. With over 138 years of experience, H&H is a trusted full-service infrastructure engineering firm. Our clients, including infrastructure owners, contractors, and colleagues, rely on us for intricate and innovative engineering solutions. They trust our time-tested ability to manage the entire life cycle of a project, from the study and planning phase through to design and construction. With over 600 talented employees located across 30 offices nationwide, H&H can efficiently and effectively handle assignments of all sizes, types, and delivery methods around the country and across the globe. Responsibilities Perform assignments under the direct supervision of a professional electrical engineer Provide CAD support utilizing AutoCAD and Microstation for electrical system design for movable bridges and transportation structures Support the electrical department with design concepts and calculations for power distribution systems, industrial control systems, lighting, etc. Perform field inspections of electrical systems Write inspection reports to document system condition with repair recommendations Apply engineering principles to solve complex problems Requirements BS degree in Electrical Engineering or Electrical Engineering Technology Zero to two years of electrical engineering experience Knowledge and interest in industrial controls, power distribution, and lighting Experience with the electrical construction industry (residential, commercial building, lighting, etc.) (preferred) Hands-on experience (preferred) Excellent technical writing skills and attention to detail Experience with CAD to develop engineering drawings, AutoCAD or Microstation (preferred) Benefits Salary range—  $72,000-$75,000 annually. Salary commensurate with experience. We offer a professional work environment, a competitive salary, a benefits package, and 401(k). EOE M/F/DISABILITY/VETS

This is not a typical desk job. All of our employees are active participants in our shop and processes. We manufacture our own components for custom products in a very unique industry. Utilize your AutoCAD®/AutoDesk® Inventor skills and knowledge of woodworking, metal, glass and lighting to create shop drawings to be used in the construction of highly specialized casework. Entry Level applicants should have completed a course in AutoCAD® and have the ability to read construction documents. Highly organized work habits appreciated. Project Managers would possess the following Qualifications: 5+ years experience using AutoCAD® for drafting in manufacturing, industrial design, engineering or architectural woodwork; general knowledge of construction practices (CSI standards), familiarity with construction documents, talent for technical precision and the ability to analyze, adapt and innovate. Project Management and communication skills desired. 3-D modeling and rendering experience helpful. Our company boasts projects across North America, creating custom specialty items for Schools, Universities, Libraries and Museums. Healthcare, Dental, Life Insurance and Paid Time Off. This is an in-person position. RESUME REQUIRED. LOCAL CANDIDATES ONLY.