Siding Installers Wanted! (Lisle)

Bison Ridge Construction, LLC is seeking an experienced Earthwork Heavy Equipment Operator with a minimum of 3 years of experience primarily in overlot grading and mass overexcavation for residential and commercial land development projects. The ideal candidate will have experience with site layout, overlot grading, mass overexcavation, and be familiar with erosion control BMPs. The Earthwork Equipment Operator is responsible for operating heavy equipment to spread earth, grade terrain, or move dirt and rock. Must have experience operating paddle wheel scrapers, rollers/compactors, skid steers, mini excavators, water trucks, etc. Accepting applications from 10/3/25 to 10/10/25. Bison Ridge Construction has been delivering full-service general contracting and construction management services for land development projects since 2010. We have been involved in projects in the Denver Metro area, Northern Colorado and Southern Wyoming. Duties and Responsibilities • Operate equipment equipped with blades in successive passes to remove topsoil, vegetation, or rocks or to distribute and level terrain • Complete mass overexcavation of sites per plan specifications, achieving proper moisture content and compaction • Safely operate various pieces of equipment including paddle wheel scrapers, rollers/compactors, loaders, dozers, skid steers, mini-excavators, etc. • Read and interpret grade stakes, site markings, and plans • Properly set up and utilize grade control devices to achieve grade tolerances per plan specifications • Always operate equipment safely including operating equipment in the vicinity of underground utilities (communication, power, natural gas, etc.) to avoid damage and injury • Installation and maintenance of BMPs and erosion control • Attend daily meetings to review schedule, production goals, and safety • Work safely at all times, observing all company policies, OSHA Regulations, and site-specific requirements and policies • Safely operate power tools (demo saws, compaction equipment, generators, air compressors, etc.) • Properly maintain equipment including daily pre and post inspections and daily greasing • Must have a collaborative attitude and willingness to perform any work that is required including general labor tasks which may include shoveling, lifting, etc. • Must be able to work overtime including Saturdays • Other duties as assigned Qualifications/Skills Required • Able to safely and efficiently operate equipment such as scrapers, rollers/compactors, loaders, skid-steers, etc. with experience in the heavy civil construction field • Able to read and understand plans and specifications • Able to check grade, read stakes and perform related math functions Physical Requirements Must be physically fit and able to perform job duties including: frequent use of hands, arms, legs and whole body; long periods of balance, standing or sitting; frequent walking, climbing, bending and/or lifting objects in excess of 50 pounds. Operators are subject to continuous bouncing, shaking, and equipment vibration. Must be able to work in all weather conditions including very hot, cold and wet conditions. Work Reporting Locations Foremen and/or Superintendents will inform employees of the work reporting location. The location will vary depending on project location. Employees are expected to have reliable transportation to and from the work reporting location. Benefits • Weekly compensation • Health Insurance • Dental insurance • Vision Insurance • Paid vacation after 1 year • Eligible to participate in 401k plan with employer match after 1 year Wage range $22-$34/hour depending on experience. Apply in person at 7251 W 20th St, Building B, Greeley, CO 80634. Office hours are Monday-Friday 8:00 a.m. – 5:00 p.m. Or apply online at www.bisonridge-co.com. Or email your resume by responding to this job posting. No phone calls please. Bison Ridge Construction, LLC is an equal opportunity employer and a drug free company. All employees are subject to random drug testing.

Pilatus is looking for detail-oriented individuals to join our new state-of-the-art Aircraft Paint Shop. In this role, you will work under limited supervision to prepare and paint aircraft exteriors and components such as fuselages, wings, fairings, horizontals, verticals, and flight controls in accordance with special specifications and all technical data. You will also process the assigned workload through the shop while meeting quality and schedule expectations. Additionally, you will mask, sand, prime, paint, and complete paint inspections on the PC-12 PRO Single Engine Turboprop, and the PC-24 Super Versatile Jet. You will be a key part of our team that values a perfect final aircraft delivery that brings our customers' dreams to life. Take your career to the next level with Pilatus Business Aircraft! Go to this link to apply: https://recruiting.paylocity.com/recruiting/jobs/Details/3619834/PILATUS-BUSINESS-AIRCRAFT-LTD/Aircraft-Paint-Technician Pilatus is hiring for the following shifts: Monday - Friday, 3:30pm - 12:30am Monday - Friday, 11:30pm - 8:30am Essential Duties/Responsibilities Performs customer-facing, finish-grade painting in accordance with applicable specifications by fabricating patterns, stencils, templates, and operating spray equipment to apply finish coats Prepares aircraft surfaces by sanding, masking, and priming surfaces for final layout and painting Performs incoming inspection of aircraft and materials upon arrival from Stans Recognizes and troubleshoots problems as they arise, alerting others regarding potential concerns and ensures that all materials are available to support painting activities Maintains accurate records and documents and complete sign-offs in a timely manner Ensures all work is performed according to applicable regulatory requirements, customer specifications, and established quality standards and procedures and notifies appropriate personnel of any deviations Follows safety policies and uses required personal protective equipment in accordance with company and government regulations and guidelines Other Duties/Responsibilities Works with and accepts guidance from Leads and higher skilled technicians, while helping to build skills and abilities of lower level technicians Develops and implements skills and techniques required to perform all assigned tasks in accordance with Pilatus quality standards Performs other related duties and assists coworkers and other departments to successfully perform other job tasks as assigned by Lead or Director Skills/Qualifications High school diploma or general education degree (GED) required Two (2) years related trade school or vocational degree preferred Demonstrated craftsman-level abilities and quality, and a minimum of two (2) years related experience or equivalent combination of education and experience Has a thorough understanding of all pertinent paint shop processes, paint systems, and quality standards Ability to use measuring tools and perform basic math computations Ability to use paint sanders, spray guns, primer guns, sealant guns, and buffers Ability to read, understand, and adhere to engineering drawings, tech specs, and other relevant documents Eye for precision and attention to details Able to work in heights, restricted spaces, and lift up to 40 pounds Regular, reliable attendance and willingness to work overtime and other shifts as required Basic computer skills including Microsoft Office, including Outlook, Word, and Excel Must be able to read, write, speak, and understand English What We Offer: 11 paid holidays a year, plus 15 days of paid vacation time, and 6 days of paid sick/personal time to start with an increase to 20 days of paid vacation time after 5 years with Pilatus 90% of medical, dental, and vision premiums paid for single coverage and 80% for family coverage, averaging $9,600 annually Monthly health savings account (HSA) contributions totaling $2,250 for single coverage and $3,000 for family coverage annually 401(k) retirement plan matching up to 6% Life and long-term disability insurance premiums paid in full Tuition assistance available annually after the first year The salary range for this position is $24.53 - 34.53 per hour depending on experience. A shift differential of $2.00 is applied to both swing and night shifts. Salary to be determined by the education, experience, knowledge, skills, and abilities of the applicant, internal equity, and alignment with market data. Go to this link to apply: https://recruiting.paylocity.com/recruiting/jobs/Details/3619834/PILATUS-BUSINESS-AIRCRAFT-LTD/Aircraft-Paint-Technician

Contractor is looking to hire Plumber or Tradesman capable of handling plumbing repairs such as: 🛠️ Replace water heaters 🛠️ Snake main line 🛠️ Drain camera (boroscope) into lines to diagnose blockage or issues 🛠️ Replace copper pipes, sewer stacks Must have: 🛠️ Own tools 🛠️ Own vehicle 🛠️ Own a smartphone to be able to take photos $25-$35/hour--depends on capabilities and performance PLEASE LEAVE: NAME PHONE EMAIL --------- Se busca un plomero o técnico especializado en plomería, capaz de realizar reparaciones como: 🛠️ Reemplazo de calentadores de agua 🛠️ Desatascador de tuberías principales 🛠️ Cámara de drenaje (boroscopio) en tuberías para diagnosticar obstrucciones o problemas 🛠️ Reemplazo de tuberías de cobre y alcantarillado Imprescindible: 🛠️ Herramientas propias 🛠️ Vehículo propio 🛠️ Teléfono inteligente para tomar fotos POR FAVOR DEJE: NOMBRE TELÉFONO CORREO ELECTRÓNICO

LANDSCAPE, IRRIGATION, or EROSION CONTROL SPECIALISTS. Foreman, Experienced Installers or Laborers. Valid drivers license a plus. All State and Local Government Jobs. We are looking for a qualified skilled Head Foreman, with a valid drivers license in the Front Range area. Also, hard working General Laborers and Specialists, willing to promptly perform reasonable tasks as requested!. Installing commercial, state and local government seeding, erosion control items, large and small landscaping and irrigation systems. Full or Part time. Health Insurance and Savings available. We are fully insured and obey all Federal, State and Local tax laws. OSHA required (PPE). Safety vests, hard hats and work shoes. No going to the beach wear. Not required to come to office. Start time is at the job. Texto a si Española (720) 468-8384

RV & Trailer Repair Technician – Full Time We are looking for a skilled RV & Trailer Technician to join our service team. Duties include diagnosing and repairing RV systems (electrical, plumbing, HVAC, propane, and appliances), chassis/brake/suspension work, roof and seal repairs, slide-outs, generators, and safety inspections. Candidates must have 2 years RV experience, strong troubleshooting skills, and a valid driver’s license. RVTI certification is a plus but not required. Must be able to lift 50+ lbs and work outdoors. Competitive pay based on experience + training opportunities. Full-time, year-round position

Hiring experienced commercial painters for a large project at the Minot Air Force Base. Project will be aprox 1 year long. Candidates will have the option to continue employment after completion at different locations. Must be able to pass background check. Must be experienced. We are also hiring for projects at Ellsworth AFB Rapid City SD and Warren AFB Cheyenne WY. Must respond with resume or brief description past experience. Must respond with a phone number you can be reached at.