Browse
···
Log in / Register

Got Mechanical Skills? Little Experience needed**$21.00/hr!

$21/hour

12065 SW King Arthur St, King City, OR 97224, USA

Favourites
Share

Description

Mechanical Assembler Little previous experience in manufacturing is required. You can do this job if you have strong general mechanical skills and a desire to learn! Our client is locally owned and operated. Established in 1949, it has grown into a regional and national industrial equipment supplier, providing a combination of value added technical services, engineering, consultation, and quality products to a variety of markets. They provide mission-critical equipment to a wide variety of industries including Fortune 500 companies. PRIMARY DUTIES: Assemble and test large industrial products from bare parts, in "job shop" and production environment. This includes mechanical connections, supports and structures, and control panels. Build custom air compressor, vacuum pump, blower, and pump assembly packages. DESIRED QUALIFICATIONS: • Some experience to build and disassemble an engine or machine • Electronic Panel Assembly experience preferred but not required • Read & interpret assembly drawings • Mechanical skills • Physically able (lifting of 50 lbs occasionally) • Work well independently/self-starter and with a team DUTIES AND RESPONSIBILITIES: Such duties include, but are not limited to: • Assemble mechanical assemblies; such as air ends, blowers, and other compressed air system components, working on a shop floor. • Inspects components for proper assembly, specifications, fit and finish. • Plans assembly and positions components according to the knowledge of unit being assembled and through the interpretation of engineering drawings, layout drawings or electrical schematics. • Remove small quantities of metal with hand files, scrapers or machine tools to produce close fit between parts. • Bend and install tubing and fittings for oil lubrication/cooling systems. • Align couplings and subassemblies to the gearbox or other components. • Operate drill presses, milling machines, lathes, hydraulic presses, welders and other shop equipment to assist in assembly operations. • Test completed assemblies for proper operation, temperature, vibration and noise levels and complete required written reports. Troubleshoot, repair or replace faulty components. • Provide feedback in regards to design improvements, updates, and procedures, verbally and in writing, as required. • Work in conjunction with Floor Supervisor to ensure assemblies meet design parameters. • Perform workstation and shop clean-up duties as assigned. EDUCATION, EXPERIENCE, SKILLS, AND KNOWLEDGE Qualifications and Requirements: • Education: High School diploma or GED preferred, but not required. • Specialized training: mechanics, electrical • Previous experience is desired but not required. It should include mechanical assembly and disassembly. Desired Skills • The ability to learn to read and use handheld mechanical measurement devices (micrometer, dial indicator, caliper) as well as electrical measurement devices (Fluke meter). • Recognize common mechanical and electrical components • Passion for auto mechanics, building and/or tinkering with mechanical components • Excellent communication skills • Must work well with others in a safe and self-directed manner • Reading: Read and interpret the following documents: operating and maintenance manuals, employee manuals, safety guidelines, electrical schematics, blueprints, mechanical sketches, and electrical and mechanical reference charts. Day Shift: 5:00 am to 1:30 pm **Not public transportation accessible** Pay rate: $21.00/hr to start! Email us at portlandwest@pridestaff.com Or Call Today to Apply! 971.371.4028 And Walk-ins are welcome Monday to Friday from 9:00 am to 3:30 pm. 12600 SW Crescent Street Beaverton, OR 97005 PrideStaff Portland is a locally owned and operated Staffing Agency. PrideStaff is a winner of the coveted "Best of Staffing" Diamond award for 15 consecutive years for the highest level of satisfaction as rated by our valued Employees and Clients. Over the years, PrideStaff has been a consistent industry leader, developing technology and service processes that allow our organization to deliver superior performance. When it comes to your success, we leave nothing to chance. Let us support your job and career search and see the difference PrideStaff can make!

Source:  craigslist View original post

Location
12065 SW King Arthur St, King City, OR 97224, USA
Show map

craigslist

You may also like

Craigslist
Batching Assistant – FF964 (Van Nuys)
Batching Assistant Van Nuys, CA Full time Temp to hire Monday thru Friday - 6am to 2:30pm $19hr to $21hr depending on experience. A fast-growing company passionate about creating fresh, high-quality health and wellness beverages is seeking a motivated Batching Assistant to join their team in Van Nuys. Summary: Working as part of the Manufacturing & Operations team and under the supervision of the Chief Batching Officer, the Batching Assistant will operate equipment that blends raw materials to create food and beverage products by weighing, measuring, and mixing ingredients to client specifications. As needed, the Batching Assistant will also cross-train as a Production Support to operate and/or assist with production lines, including but not limited to the high-speed canning/beverage production line, the bottle filling production line, powder flavor-making production line, and labeling line to create, produce and package products while working on a team. Responsibilities: • Assist, provides support, and/or carries out: Precisely stages kits and verifies physical ingredients to match the ingredients on batch sheets according to the product recipes. • Collaborate with Quality Compliance Technician on the analytical results and makes modifications or adjustments to the batches when needed (i.e. Brix, Acid, pH, color). • Ensure resulting mixture meets specified consistencies and requirements; Report any urgent quality, food safety incidents, or deviations immediately to Chief Batching Officer or Quality team for investigation and resolution. • Accurately weighing or measuring all ingredients per formulation. • Accurately documents lot numbers, quantities, and expiration dates on formulas per customer regulations. Quality • Perform set-up of batching area, including tools and equipment needed. • Perform physical inventory of materials before and after production and document • Communicate any ingredient availability or ingredient quality issues immediately to the Processing Supervisor. • Perform cleaning and sanitation of batching equipment and fillers (CIP’s, foaming equipment and hand brushing). • Properly clean and seal all ingredient containers prior to returning to the proper ingredient storage areas. • Adhere to all food safety policies and procedures. • Operate forklift to load/move various ingredients, following all safety procedures. • Maintain general housekeeping and quality in all areas of batching, production, and any additional areas. • Accurately completes inspection sheets based on overall product quality. • Provide status report during shift handoff (batches produced, quality and results of batching) • Must have proficient knowledge of the batching flow to production. • Report non-compliance and food safety issues to management. • Ability to stand or walk for extended periods of time in a manufacturing environment. • Ability to regularly lift and/or move up to 50 pounds and frequently lift and/or move up to 50 pounds, must use appropriate means to accomplish this, using pallet jack and/or forklift, as necessary. • Ability to visually inspect products and materials. Qualifications: • A high school diploma or equivalent. • 1-2 years prior experience in batching in food and beverage industry. • Able to be physically active for the duration of the workday. • Forklift experience.
16223 Gault St, Van Nuys, CA 91406, USA
$19-21/hour
Craigslist
$20/Hr. Delivery Driver (BOX TAIL DRIVER/ CLASS C) (Commerce, CA) (Commerce)
We are a shredding business that is here to provide peace of mind to businesses, residents, and government by offering the most secure, versatile, and comprehensive shredding services available. Job responsibilities: • Operates a company vehicle in a safe, professional manner. Shows proficiency in handling and maneuvering trucks and equipment. • Transports documents, equipment, supplies, etc. to and from customer locations while complying with traffic regulations. • Responsible for safe and proper loading and unloading of trucks. • Performs mandated daily safety and maintenance checks on truck and shredder equipment. • Maintains a responsible approach to all security matters related to operations while following the company’s policies and procedures. • Develops and maintains a relationship with our customers. • Completes all necessary paperwork accurately as required by company. • Maintains cleanliness of truck interior and exterior. • Always maintains personal appearance and truck presentation in accordance with policies. Qualifications / Requirements: • Good communication skills with company personnel and customer assistance • Consistently reports to work on time prepared to perform duties of position. • Must be able to work in a fast-paced environment. • Receive, comprehend, and respond appropriately to directions. • Follow all company policies and procedures. • Move records from one location to another utilizing all company security measures. • Willing to go through a background check. • Must have DMV driver record! Schedule & Pay: Scheduled: Mon-Fri 7AM-3:30PM (OT if needed) Job Type: Full-time Pay: $20.00/HR
2403 Senta Ave, Commerce, CA 90040, USA
$20/hour
Craigslist
Document Control Specialist (Chatsworth)
The role of Document/Change Control Specialist include, but are not limited to: Document Management • Oversee the full lifecycle of controlled documents, including creation, review, revision, approval, issuance, and retirement. • Ensure documents are formatted, maintained, and distributed in accordance with company standards and procedures. System Administration • Administer and maintain the company’s Document Management System (DMS), including user access, permissions, and periodic system updates. • Troubleshoot system issues and liaise with IT or vendors as needed. Compliance & Audits • Prepare and provide documentation during internal, customer, and regulatory audits. • Ensure all controlled documents comply with applicable regulatory standards (e.g., FDA, ISO, cGMP) and company requirements. Version Control • Monitor and enforce proper version control practices, ensuring that obsolete or superseded documents are promptly removed from circulation. Document Archiving • Maintain both electronic and physical archives according to established retention schedules. • Index and catalog records to allow for accurate and efficient retrieval. Change Control • Administer the Document Change Request (DCR) process to ensure that changes are reviewed, approved, implemented, and documented appropriately. Record-Keeping • Maintain accurate records of product data, certificates of compliance, inspection reports, and other documents required for quality assurance and regulatory compliance. Training Support • Train employees on document control procedures, proper documentation practices, and effective use of the Document Management System (DMS). • Provide ongoing support to ensure adherence to company documentation standards. Key Skills & Qualifications • Attention to Detail: Ability to ensure accuracy, consistency, and completeness in all documentation. • Software Proficiency: Skilled in document management systems (e.g., SharePoint, MasterControl) and Microsoft Office Suite (Word, Excel, PowerPoint). • Quality System Knowledge: Familiarity with quality management systems (QMS) and regulated manufacturing environments, including FDA, ISO, and cGMP requirements. • Manufacturing Awareness: Understanding of manufacturing workflows and quality control principles to align documentation with operational needs. • Communication Skills: Strong interpersonal and written communication skills for collaborating with cross-functional teams and training staff. • Organizational Skills: Ability to prioritize, manage deadlines, and maintain meticulous records in a fast-paced environment. Pay : $20.00 Hours: 7 a.m. to 3:30 p.m.
1030 1/2 San Fernando Rd, San Fernando, CA 91340, USA
$20/hour
Cookie
Cookie Settings
Our Apps
Download
Download on the
APP Store
Download
Get it on
Google Play
© 2025 Servanan International Pte. Ltd.