Aircraft Paint Technician $24-34/!! (Broomfield)

JOB SUMMARY: To provide Document Administration for all phases of the construction project(s) including Subcontracts, Change Orders, RFIs, ASIs, Submittals, Meeting Minutes, As-Built Drawings, Closeout Documentation and to provide administrative support to the Project Management Team. PROJECT ENGINEER DUTIES: CULTURE AND POLICY: • Our Employee Handbook: Our PE is an important member of the company. Staff at all levels view Pes with high regard. A PE shall be familiar with employee policy, operate in compliance with the policy, reinforce the policy with team members, and lead by example. • The company Safety Manual: PE is responsible for complying with and promoting safety on the jobsite. • If we’re not having Fun, were done: The company’s culture embraces the notion that we all perform better when we are enjoying our work, overcoming challenges, learning, achieving, and yes, winning. As PE you are to promote this positive fun company culture. Winning needs to be shared. Lessons learned, humbly and invitingly shared as well. This company is full of geeky construction folks, who take themselves very seriously, and have high expectations for themselves and those they work with, all contributing to the level of pride that binds us as a team. Keep the fun. • Marketing: The PE has an impact on whether the company has the opportunity of repeat business and is often conversing with contacts that could present new opportunities. PE is to conduct all communications and presentations in a professional manner. PE shall remain knowledgeable of all company engagements. The PE shall provide urgent response to any company marketing or estimating request pursuing RFI/RFQ/RFP/Interviews, to include keeping your personal resume current and immediate participation in brainstorming, content contribution, and subsequent review of RFP written and graphic (draft) content, once requested. SUBCONTRACT ADMINISTRATION: • Subcontracts: The PE is responsible for drafting the scope of work for each subcontractor for Project Manager approval. The PE is responsible for tracking the execution of Subcontracts and where necessary putting together Addendums for the Subcontracts. • Subcontractor Change Orders: The PE is responsible to assist the Project Manager in gathering pricing, assembling, logging, distribution, and tracking subcontract change orders. OWNER CONTRACT ADMINISTRATION: • Prime Contract: The PE is responsible to review and understand the company’s Contractual obligations to the Owner. • Owner Proposals and Change Orders: PE is to assist the Project Manager with the creation, tracking, and logging of Owner Proposals and Change Orders. • As-Built Drawings: The PE is responsible for updating the plans with changes as they occur throughout the project. This is done through Procore. The PE is to ensure that the As-Built Drawings are up to date on all RFIs, ASIs and Approved Proposal Requests. • Accident Reports and OSHA Reports: The PE is responsible for logging accident reports and OSHA Reports in Procore. • Turnover Documentation: PE is responsible to collect and monitor turnover documentation (Certificates of Substantial Completion and Certificates of Occupancy). CLOSEOUT DOCUMENTATION: • Closeout Checklist: The PE is responsible to create and keep an updated closeout checklist from the beginning of the job through completion. The closeout checklist tracks all closeout items required at the end of the job and when they are received. • The PE is responsible to gather all closeout documentation for the project and ensure that it is delivered to the Architect in the proper format. SCHEDULING AND PROACTIVE PLANNING: • Submittals: PE is responsible to coordinate with the Project Manager and Superintendent to schedule submittals according to order of production and lead times. Submittal Scheduling and Coordination is a crucial aspect to this job. • Scheduling: The PE may be asked to assist in inputting the schedule in Microsoft Projects under the direction of the Project Manager. The PE should be familiar with Microsoft Projects. CONFLICT RESOLUTION/PROBLEM SOLVING: • Conflict Resolution/Problem Solving – The PE is a problem solver focused upon resolving disputes or non- compliance issues that disrupts the production of the project within job description. • The PE is to report all site conflicts to the Superintendent. MEETINGS and COMMUNICATIONS: • Pre-Construction Meetings with Owner and Design Team: PE is responsible to prepare agenda and all supporting documents for the OAC meetings. PE is to attend meetings, take accurate notes, produce and distribute meeting minutes in a timely fashion and save meeting minutes to Procore. Meetings need to be conducted in a Professional manner. • Owner Progress and Pay Application Meetings: PE is to attend meetings, take accurate notes, produce and distribute meeting minutes in a timely fashion and save meeting minutes to Procore. Meetings need to be conducted in a Professional manner. • Project Manager Weekly Meeting – The PE is responsible for the agenda and meeting minutes where they will meet with the Project Team to review Project Buyout, Subcontracts, RFIs, Submittals, and Change Orders on a weekly basis. • Document Management Protocol: The PE is responsible for ensuring that all documents within scope of work are stored in Viewpoint according to the Document Management Protocol. KNOWLEDGE, SKILLS AND ABILITIES: • Provide direction to and resolve problems amongst subcontractors and vendors within PE scope of work. • Communication using the following tools: telephone, fax machine, written logs, email, computer, Smartphone and video camera. • Ability to work with little or no supervision. • Ability to meet deadlines, prioritize assignments and provide recommendations. • Communicate professionally and effectively. • Be able to provide support to senior management and multiple project managers simultaneously. • Strong organizational skills. • Strong ability to multi-task. • Excellent written and verbal skills. • Excellent working knowledge of Microsoft Office Products. • Viewpoint Software experience preferred • Ability to follow processes and procedures. • Maintain and exercise integrity in all business dealings. • Ability to work with a variety of Project Manager(s), Superintendent(s) and other business associates.

📍 Location: 3202 S. 300 West, Salt Lake City, UT 📞 Call: 385-500-2766 Pay Rate: DOE $22 – $27 per hour Schedule: 8–10 hour shifts We are seeking experienced Concrete Carpenters with proven skills and a strong work history. Candidates must be reliable, safety-focused, and ready to work on a variety of concrete projects. Requirements: * Must have references and a solid work history * Must provide own tools * Must have dependable transportation * Ability to lift 50+ pounds and work full shifts * Must be able to read and interpret prints Skills & Experience Needed: * Proficient in layout work (footings, walls, boxes, and dowels) * Formwork, rebar placement, and concrete placement experience * Ability to build rough wooden structures (e.g., temporary shelters, safety handrails) * Experience anchoring and bracing forms to fixed objects using nails, bolts, anchor rods, steel cables, and planks If you meet these qualifications and are ready to work with a reliable team, apply today! 📍 Walk-in: 3202 S. 300 West, Salt Lake City, UT 📞 Call: 385-500-2766

https://irhusa.com/ Summary The Rigger with CDL position completes a variety of level rigging skills, operates tractor-trailers and other equipment, supports operations by moving objects, installing and dismantling equipment, and obtains the necessary skills of the position. Essential Duties and Responsibilities / Other Duties as Assigned... Assists in yard Aligns levels and anchors machinery. Attaches loads to rigging to provide support or prepare them for moving by using hand and power tools. Riggers with CDL: Conducts pre and post-trips and drives tractors and trailers in compliance with federal, state, and local laws, rules, and regulations. Job Duties Obtains necessary training and safety certifications to complete tasks. Attends rigging class as required. Works closely with the Foreman and crews to learn the process of moving machinery and items of size and weight. Attach pulleys and blocks to fixed overhead structures such as beams, ceilings, and gin pole booms, using bolts and clamps. Control movement of heavy equipment through narrow openings or confined spaces, using chain falls, gin poles, gallows frames, and other equipment. Manipulates rigging lines, hoists, and pulling gear to move or support materials such as heavy equipment. Obtains knowledge of equipment uses and follows procedures (IE procedure for equipment placement on trailers for loading and off-loading; equipment tie-down procedures Learns and understand tools required for the job and the purpose of the tools. Displays excellent communication skills including presentation, persuasion, and negotiation skills required in working with coworkers and including the ability to communicate effectively and remain calm and courteous under pressure. Works out of town, on weekends, and works overtime as needed. Keeps a flexible schedule and is able to travel (up to 50% of the time). Maintains punctual, regular, and predictable attendance. Works collaboratively in a team environment with a spirit of cooperation. Signals or verbally directs workers engaged in hoisting and moving loads, in order to ensure safety. Reads and creates drawings and lifting plans. Completed necessary paperwork on a daily basis. Uses basic and advanced rigging techniques. Dismantles and stores rigging equipment after use. When released by the foreman or at the end of the day, checks with Dispatch for more duties. Uses job-appropriate PPE. Works onsite at customer locations, as needed Respectfully takes direction from supervisor. Performs all duties to the best of their ability, faithfully, intellectually, safely in the best interest of the company. Requirements Holds a Valid CDL. Current DOT Medical Card. Familiarity with DOT Federal and State regulations. Ability to tie equipment down per the DOT requirements. Clean MVR

Join our Team! DIVCO is more than just an ordinary HVAC contractor. Our company has experience & longevity in the heating and cooling industry, due to the professionalism, skill, and depth of our workforce. We invite you to experience the DIVCO difference by applying for our current available position Journeyman Commercial Technician. Position Responsibilities: If you are searching for the opportunity to grow and thrive within a company, we can help. We currently have an opening on our service team where you will have the opportunity to use your current skill set while improving you HVAC equipment's service and repair process in commercial applications. -Maintain HVAC equipment, clean coils, change belts and filters, ensure units are running properly -Replace failed components -Work hand in hand with team members to determine the safest and most efficient avenue to perform tasks -Review and comprehend wiring diagrams -Connection of refrigerant lines, gas lines, venting, and electrical circuits -Adhere to all safety policies and procedures Qualifications: -Valid driver’s license -Active (06a) electrical license -Mech1 or Mech2 license -EPA refrigerant handling license -10 Years Previous field experience in the HVAC trade -Familiarity with wiring diagrams and code requirements -Ability to handle a physical workload -Strong problem solving and critical thinking skills -MUST be able to pass a background check, drug screen, and motor vehicle report Salary Range: $62,400 – $108,000 annually Depends on Experience We Offer: -Medical, Dental, Vision, Life Insurance, Employee Assistance Program (100% of employee’s premium paid) -Short-term disability -Accident insurance -401(k) match -Paid Time Off – 184 hours per year including vacation, paid sick leave (based on 40 hours worked per week) and eight paid holidays -Employee rewards and recognition programs (employee of the month, longevity awards – 5 yr., 10 yr., 20 yr., 30 yr., and monthly BBQ’s) AAP/EEO Statement: Divco is an Equal Opportunity/Affirmative Action Employer. All qualified individuals including protected veterans, individuals with disabilities, race, color, religion, sex, sexual orientation, gender identity, or national origin will be considered. If you are a qualified individual with a disability or a disabled veteran, you may request a reasonable accommodation if you are unable or limited in your ability to access job openings or apply for a job on this site as a result of your disability. You can request a reasonable accommodation by contacting Libra Lynch at libralynch@divcoec.com or 509-534-7225. For consideration, please submit your resume to chrismarkham@divcoec.com or fax to 509-534-6865.

Edwards Smith Construction, Coeur d’Alene’s premier custom home builder, is seeking an EXPERIENCED CONSTRUCTION SUPERINTENDENT to join our team. Our craftspeople are some of the finest around bringing their skills, efficiencies and professionalism to building one-of-a-kind homes in some of the most beautiful locations in northern Idaho and eastern Washington. Have you already demonstrated you have the experience, people skills, initiative and organizational know-how to succeed as a superintendent? Are you looking to have a role in continuing to raise the bar for the construction industry? If the answers are yes, we’d love to hear from you. Job Skills and Qualifications • Experience with luxury home building; previous trade experience required • Ability to plan and see the big picture • Critical-thinker and problem solver • Knowledge of materials, products and installation • Able to coordinate a team of professionals of different disciplines, including subcontractors and suppliers, to achieve the best results • Proficient in Microsoft Office and general computer software • Outstanding interpersonal, communication and negotiation skills • Excellent organizational and time-management skills • Comfortable reading and understanding detailed construction blueprints and drawings • Skilled at multi-tasking • The ability to see project through to completion To apply: Visit our website at https://edwardssmith.com/careers/ and complete the online application. Please attach your resume and cover letter. Or you may email your resume and cover letter to Jodee@edwardssmith.com. Note: Resumes will not be considered without a cover letter.

Owen Equipment, an Owen Company, is looking to hire an experienced Truck Equipment Installer Technician Mechanic to join our growing team. We are one of the largest Vactor and Elgin dealers in the United States and sell, service and rent sewer cleaners, vacuum excavators, street sweepers and related accessories. We are also a leading upfitter of service bodies and snow equipment and are an official dealer for such leading brands as IMT, Henke, Wausau-Everest, Swenson Spreader Co., and Oshkosh. We maintain five full-service locations in Portland, Oregon; Kent, Washington; Spokane, Washington; Fairfield, California; and Salt Lake City, Utah and our customer base consists of the largest municipalities and contractors in the Western U.S. Our equipment is critical to keeping our streets and sewer systems clean, clearing snow, locating buried infrastructure during construction projects, and helping to build and maintain our electrical grid. The key to our success has been our people. And that’s still true today. Every team member is extremely knowledgeable about our products and the industries in which they serve. Whether it’s parts, service, or sales, we know what our customers’ need because we know what they do. We are a fast-growing entrepreneurial company with many opportunities for advancement and professional development. We are looking for highly talented individuals with high ambition and a desire to advance their career and grow into more senior roles as their abilities allow. Salary: $25.00 - $35.00 an hour depending on experience. Quick Apply Link: https://www.paycomonline.net/v4/ats/web.php/jobs/ViewJobDetails?job=208075&clientkey=5BAF5A0423ED9DB47FC41E5A302485D3 Benefits: Full Benefits Package including Medical, Dental, Vision, FSA, HSA, and 100% company paid Life and LTD. We have PTO that accrues weekly, seven paid holidays (eligible after 30 days from start), and 401(k) with company match. Visit our website www.owenequipment.com for an overview of our company. Job Description: As a truck equipment installer technician, you will be responsible for installing, repairing, and maintaining various truck bodies and equipment, such as dump bodies, flatbeds, water tanks, plows, chippers, and custom-built machines. You will also perform 12v electrical installation, welding, fabrication and troubleshooting tasks. Requirements: To be successful in this role, you should have the following qualifications: • High school diploma or equivalent. • At least one year of experience in the commercial truck/truck equipment industry. • Knowledge of hydraulic, pneumatic, and electrical systems • Ability to read and follow blueprints, schematics, and work instructions. • Proficiency in using hand tools, power tools and other specialized equipment. • Access to tools such as wrenches, sockets, drills, impacts, and grinders. • Valid driver’s license and insurable driving record. • Ability to work independently and as part of a team. • Ability to lift up to 50 lbs. and work in various weather conditions. • Attention to detail, quality, and safety. If you are a great team player with a strong work ethic and a great attitude and are interested in joining a fast-growing company with opportunities for advancement, please apply online or feel free to drop in and apply in person. EEO Statement: Owen Companies are Equal Opportunity Employers. We celebrate diversity and are committed to creating an inclusive environment for all employees. We provide equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. Quick Apply Link: https://www.paycomonline.net/v4/ats/web.php/jobs/ViewJobDetails?job=208075&clientkey=5BAF5A0423ED9DB47FC41E5A302485D3