1st Class Inside Manual Machinist (New Orleans, La)

We are looking for qualified cabinet installers for a hotel project in Algona. This is a temporary position. The work is basic and straightforward. It is production work as most units are the same, small galley kitchenettes. There are stone tops that need to be dropped on top of the cabinets with no cutting involved, Just drop and stick. The vanities come as knock down frames that mount to the wall with small cubby cabinets below. The vanity tops will likely need to be cut to length before installation. There are other items that need installing as well, like bath accessories, window sills, door frames and hardware. The more experience the better. Right now, the project is ready for cabinet installation. Please email your experience and availability.

Hammer & Hand is seeking experienced full-time Frame-to-Finish Carpenters, as well as Site Leads (lead carpenter and site supervisor), to join our Seattle team! Frame-to-Finish Carpenter Carpenter Qualifications • Approximately 5 years of custom carpentry experience including framing, envelope, and trim install • Experience with remodel and new build projects • Knowledgeable of materials, methods, and the tools involved in the construction of buildings and other structures • Must be able to keep accurate records and perform timekeeping, including electronic submittals • Must have reliable transportation, a valid driver’s license, and a clean driving record • Must have full selection of tools to perform the work • High level of accuracy and pride in your craft • Ability to lift 50lbs Site Lead Hammer & Hand is seeking a site lead to join its Seattle team. Successful candidates are goal-driven, organized, outside-the-box problem solvers with a keen attention to detail and the ability to manage a team and at least 10 years of experience. Site Lead Qualifications • Approximately 10 years of construction and carpentry experience • Approximately 5 years in an on-site project management role • Experience with high-end residential remodels and new build projects • Experience managing high-end commercial TI projects • Must have reliable transportation, a valid driver’s license, and a clean driving record • Must have full selection of tools to perform the work • High level of accuracy and pride in your craft • Ability to lift 50lbs • Self-motivated and able to motivate others • Well developed computer skills, including cloud based project management tools. Preferred Qualifications & Skills • Experience with cutting-edge building practices and high performance building. • Ability to use project management software. APPLY HERE: https://hammerandhand.com/careers/ No phone calls, please. Thank you for your interest! To apply, please submit an application through the link above, and we’ll be sure to reach out to you if we decide to move forward. -- About Hammer & Hand Established in 1995, Hammer & Hand is a general contractor celebrating 30 years in partnership with clients and architects in the Pacific Northwest. Our reputation is built on decades of dedication from individuals who are as passionate about their jobs as they are about their lives outside of work. Based in Portland and Seattle, our firm serves clients by empowering employees, harnessing 21st century building science, and advancing the tradition of craftsmanship. From classic remodels to design-forward commercial build-outs and high performance passive buildings, Hammer & Hand’s projects are crafted with care and built to last. We work hard to foster an atmosphere that supports our most valuable asset: our people. As such, we are proud to announce that we are on the path to 100% employee ownership. We offer a dynamic workplace, as well as a full range of benefits, including: • Competitive Industry Wages • 100% Employer Paid Medical and Dental Benefits • Optional Vision Plan • Alternative Health Care reimbursement program for chiropractic, massage, and acupuncture • 401k Retirement Savings Plan • Employee Stock Ownership Plan • Paid Time Off and Paid Holidays • Long-Term Disability Insurance • Profit Sharing • Employee Assistance Program We are always looking for the best talent to join our team and are aware that a great candidate for a job may come from a less traditional background. Studies have shown that women, LGBTQIA+ individuals, and people of color are less likely to apply for a job when they believe they may not meet all of the qualifications in a job description. We strongly encourage you to apply even if you’re not sure you meet every one of our qualifications. If you are unsure, you can contact us through our website with questions about how this would be determined. We do occasionally have openings for those looking to hone their craft and build their skillset. These are paid positions. Please do not hesitate to apply if you feel you have the aptitude to succeed with us! See more about our employment philosophy here: http://hammerandhand.com/about/employment/ Hammer & Hand is committed to equal opportunity in employment and does not discriminate based on race, color, creed, religion, sex, age, national origin, mental/physical disability, sexual orientation, gender identity/transgender status, military/veteran status, genetic information, or any other status/characteristic protected under applicable law.

We are looking for someone that can diagnose and repair automotive vehicles. Our shop works on most makes and models. We offer services from maintenance of vehicles to engine overhauls. Benefits: Paid health insurance-Wellmark Blue Cross Blue Shield Retirement plan. Paid vacation Paid holidays No weekends ---Monday thru Friday 8:00am to 5:00pm Building was built New Year 2014 Bright new and clean Air Conditioning in the summer / Heated Floors in the Winter Shop is equipped with the latest diagnostic equipment. Requirements: Valid drivers license

Roofing – Project Manager - Field Operations We are a well-established (40+ years) roofing contractor looking for a qualified Roofing - Project Manager Supervisor to join our team! We are licensed, bonded and insured, locally owned and operated. We are looking for someone to ensure roof installations are completed in a timely and high-quality manner through the recruitment, retention, and management of capable roof installation crews. Essential Duties: Extensive roofing knowledge and ability with steep and low slope Responsibilities include but are not limited to: - Respond to the needs and concerns of customer and roof installation crews throughout the installation process - Manage and promote all aspects of project communications, including ordering materials, anticipate lead times for scheduling and manpower needs per project, daily progress updates, repairs and dispatching of crews. - Be the liaison between the customer and the roofing project leads - Approve additional roof work by onsite inspections for roof installation crews; approve additional costs if needed and communicate additions/changes with customer and office Ability to evaluate roofs for recommended repairs or replacement and estimate costs for labor and materials. - Complete hands-on roof measurements as required - Assist with the recruitment of new roof installation crews, and demonstrate our roof installation methods and requirements to new roof installation crews - Ensure our installation practices are up to date with industry standards - Facilitate the training of new roof installation crews and perform annual training refreshers with current roof installation crews - Inspect the work of new roof installations crews to ensure they meet our company standards - Evaluate the work of the roof installation crews and make necessary changes to methods or roof installations crews if they do not meet our service standards - Ensure jobs start on time, customer expectations are met or exceeded, and hours and materials are properly expended - Develop and use advanced planning skills for establishing maximum productivity of manpower, materials and equipment, etc. - Take ownership of any customer problems that arise before the sale, during installation and after job completion and follow the problem through to resolution - Comply with all safety policies and procedures, be an example, and support the company safety goals and objectives - Satisfy customers – making calls, taking calls, site visits as necessary - Work with other managers to resolve issues related to sales, installs, and measures - Assist with the resolution of escalated customer complaints - Work with production team to create scope of work and plan of action for unresolved issues, including materials and labor costs - Assist with communication between roof installation crews, customers, and office staff - Develop relationships with roof installation crews to encourage employee retention - Assist roof installation crews with completing the necessary Oversee crew leads – shop material & supplies, ensure ALL items are taken to jobsite with crew lead Safety – Coordinate all Safety training(s), documentation and field requirements for all ee’s • Review current policies and processes, provide recommendations and implement necessary changes • Create processes for appropriate fall protection/site specific safety documentation for each project both commercial and residential • Conduct weekly safety meetings and field site safety checks • Safety equipment Physical Requirements: • Must be able to sit, stand, bend, kneel, climb, and walk continuously throughout the day • Requires the ability to move about inside and outside the office and at offsite customer locations, with the ability to visit multiple locations in one day • Must be able to move items weighing up to 50 pounds Hours/Schedule: Full-time, 40 hours per week/52 weeks per year. Standard hours are M – F, 7:00am – 4:00pm, however due to the nature of the position, some afternoon, evening and weekend hours will be required to complete projects under deadlines. Excellent pay scale based on qualification up to $125,000/year, paid medical etc. Contact Brad @ 253.579.6513 or email resume.

We are seeking a skilled and detail-oriented Auto Body Technician to join our team at Fix Auto Tacoma South. The ideal candidate will have a strong background in auto body repair and restoration, with the ability to work on various vehicle makes and models. This individual must be quality-minded, hardworking, and dedicated to meeting the highest industry level. Must be able to work individually and part of a multi-functioning team. Pay: $70,000.00 - $140,000.00 per year Duties: - Perform auto body repairs, including dent removal, panel replacement, and frame repairs. - Disassemble and reassembly vehicle components as necessary for repairs. - Utilize welding and fabrication techniques to restore vehicles to their original condition. - Conduct thorough inspections of vehicles to identify damage and necessary repairs. - Maintain a clean and organized workspace while adhering to safety protocols. Requirements: - At least 3 year minimum of auto body repair experience. - I-CAR certification (preferred). - Proven experience in auto body repairs. - Able to read estimates and write supplements. - Proficiency in welding and fabrication techniques (preferred). - Excellent attention to detail to ensure high-quality workmanship. - Ability to work independently as well as part of a team in a fast-paced environment. Benefits Include: - Dental Insurance - Health Insurance - Vision Insurance - Paid time-off Schedule: - 8 hour shift - Monday to Friday - No weekends Qualified candidates must have a valid driver's license and the ability to pass a background check.

Ruan is looking for diesel technicians to be based in Tampa, FL, to support maintenance for our dedicated customers. Call 1-800-879-7826 for more information. Pay and Benefits Pay based on experience. Apply to learn more. Ruan appreciates your commitment to our success. We're equally committed to providing you with competitive, affordable health and wellness benefits to help you take care of yourself and your family. Schedule Tuesday through Saturday from 8 a.m. - 4:30 p.m. Enjoy weekend time off! Paid Training Enjoy identifying mechanic problems using charts, technical manuals, and diagnostic equipment with paid training from some of the best in the industry. Ruan ensures that our technicians have access to the latest diagnostic technology and training. Tool and Work Boot Program Ruan's tool and work boot program helps technicians obtain the tools they need to be safe and successful! Each technician that joins the Ruan team will receive a $1,000 tool reimbursement and a work boot voucher. Additionally, uniforms are provided. Why Ruan? People First, Safety Focus, 90+ Years Strong. Our shops at Ruan are locally ran where there is a sense of ownership and camaraderie. Being a family-owned company, these positions offer a feeling of security and culture that working at a dealership cannot beat.