Agua Caliente Engineering Job Listings

Superintendent (Environmental)63846022442627120

Workable

Superintendent (Environmental)

Overview: This role primarily focuses on the effective implementation of environmental remediation projects. The successful candidate will demonstrate strong skills in work planning, sequencing, and staff management to ensure the successful execution of field construction projects within specified scopes, schedules, and budgets, meeting all contractual requirements. Key Responsibilities: Project Oversight: Manage projects at multiple sites with minimal direct supervision. Supervise multidisciplinary tasks with integral scheduling components. Health and Safety: Take direct responsibility for implementing, overseeing, and reinforcing all ERRG and client Health and Safety requirements. Team Leadership: Direct field personnel, equipment operators, laborers, and subcontractors in planning and executing work. Interpret specifications and coordinate various construction phases to prevent delays and maintain project progress. Documentation: Complete accurate daily field documentation. Demonstrate a strong command of means and methods for construction activities. Contract Understanding: Understand and recognize contract requirements. Identify potential changed conditions or out-of-scope items. Cost Management: Assist in preparing cost estimates with appropriate backup. Proactively anticipate and minimize schedule conflicts. Ensure daily activities conform to budget and schedule. Procurement: Procure materials and negotiate with vendors/subcontractors. Accident Investigation: Complete initial accident investigation documentation and related actions, such as SOP development and H&S stand downs. Project Support: Attend site walks, solicit subcontractor quotes, prepare estimates, and assist in submitting proposals. Technical Skills: Utilize computer skills, including proficiency in the Microsoft Office suite. Recognize and initiate efficiency improvements. Collaboration and Goal Setting: Work directly with senior management to establish long and short-term goals. Cost Projection: Assist in projecting cost to complete and preparing change order documentation when necessary. Team Supervision: Supervise and contribute to the career development of up to 10 direct craft reports. Travel: Ability to travel up to 50 percent of the time to project sites across multiple states for project execution, as needed. Requirements Minimum Qualifications: 8 years of experience leading environmental cleanup, soil remediation, demo/decon, or habitat restoration projects. Demonstrated experience with multi-disciplinary staff executing construction projects. Supervisor Training. Preferred Qualifications: 40-Hour HAZWOPER training and currently 8-Hour HAZWOPER Refresher. USACE/Department of Defense (DoD) contract experience. USACE QC Training. OSHA 30-hour Training.

Martinez, CA 94553, USA

Negotiable Salary

Senior Engineering Project Manager63844791623041121

Workable

Senior Engineering Project Manager

Noble Thermodynamics is seeking a Senior Engineering Project Manager to lead the planning, coordination, and execution of engineering projects supporting the development of next-generation clean power plants. In this role, you will oversee multiple concurrent projects across the full project lifecycle—from design through procurement, permitting, construction, and commissioning. You will actively manage and coordinate engineering, operations, and external partners to ensure that projects are delivered on time, within budget, and to the highest technical and safety standards. You will drive critical planning and execution activities including contractor oversight and coordination, schedule management, cost tracking, risk mitigation strategy, and regulatory compliance. This position is ideal for a goal-oriented, technically proficient leader with strong project execution instincts and excellent communication and interpersonal skills. In this role, your exceptional leadership and communication skills will complement your technical expertise as you coordinate multidisciplinary teams and stakeholders in the planning and execution of engineering projects, including the preparation of project bids. You will clearly and convincingly present complex ideas, drive decision-making, secure stakeholder buy-in, and foster collaboration to achieve outstanding collective outcomes. You will play a pivotal role in accelerating the deployment of clean power generation technology through rigorous project delivery and operational discipline. Successful execution in this role will expand affordable access to clean and reliable power, by improving energy system reliability and cost competitiveness while also delivering measurable, large-scale reductions in global air-pollutants and carbon emissions. Responsibilities As the lead project manager, you will manage multiple projects with multi-disciplinary teams and are expected to fulfill the following responsibilities: Own end-to-end project management of engineering projects, from design through commissioning Develop and manage efficient project schedules, budgets, risk registers, and execution plans that minimize costs and accelerates development Track project performance against cost and schedule baselines, communicating and resolving issues proactively Identify sources of friction or potential improvements and executes plans to capture such opportunities Oversee and coordinate partners, contractors, and vendors to ensure alignment and on-budget, on-time, high-quality project execution Enforce quality standards and compliance with regulatory and safety requirements across all project stakeholders Serve as the center point of contact for project communications between internal and external stakeholders Allocate resources effectively – aligning personnel, contractor time, and equipment with task requirements, while minimizing working capital stress and timeline delay risks Prepare regular and accurate project status update (e.g., KPIs), progress reports, presentations, schedules and budget forecasts for relevant stakeholders Organize and host useful team meetings as necessary to facilitate stakeholder alignment and synchronization, and informed decision making Maintain accurate project documentation, reporting, and change control processes Oversee, motivate, and monitor the performance of the project team, ensuring quality and timeliness of assignments and roles, and address performance gaps Requirements To succeed in this role, you will need the following qualifications and demonstrated expertise: Bachelor’s degree or higher in engineering (mechanical, industrial, or chemical preferred) from an accredited institution 10+ years of engineering project management experience across the full project lifecycle in the power generation, Oil & Gas, Chemical, or EPCM sector Experience managing external project partners, contractors, vendors, and government stakeholders PMP certification or formal eng. management credentials, and proficient with project management tools and methodologies Must have executed at least one Major Capital Project with a TIC of 5+ MM USD This role demands the following core competencies: Excellent and effective verbal and written communication, with the ability to present ideas, proposals and results in a compelling manner to the relevant stakeholders. Proactive communication, instinctively keeps stakeholders informed, facilitates collaboration, seeks input and feedback, and ensures decisions are made with the right context, and at the right time—without being prompted Full complement of project management skills including project scoping and estimating utilizing work breakdown structures, cost and schedule control, design and construction management, team building, resource planning, procurement and permitting. Rigorous project control, developing and maintaining practical, high-quality data-driven tracking systems for timelines and budgets, anticipating risks and taking corrective actions promptly Strong Interpersonal skills, with the ability to identify and resolve conflict and disagreements between project stakeholders Resiliency under pressure, maintaining clarity, decisiveness, and following-through when facing tight deadlines or high-stakes challenges Professional and respectful demeanor/attitude Attention to detail An exceptional candidate would also bring the following skills: Experience managing power generation development projects. Familiarity with relevant agencies, industry codes, safety standards, and best practices (e.g., EPA, CARB, DOE, OSHA, NEC, ASME, API, etc.) Employment conditions Authorized to work in the United States Must be willing and able to travel to project sites as needed Must be willing and able to conduct field work including lifting heavy objects up to 50 lbs, climbing ladders, and navigating active construction or industrial sites Must be willing and able to work longer hours and weekends when needed to support key project milestones and ensure successful project delivery Benefits Salary range: $130,000 to $190,000 Health Care Plan (Medical, Dental & Vision) Retirement Plan (401k, IRA) Paid Time Off (Vacation, Sick & Public Holidays) Stock Option Plan About Noble Thermodynamics At Noble Thermodynamics, we are on a mission to radically and rapidly decarbonize the world’s power needs. We are bringing to market the Argon Power Cycle™—our breakthrough in power generation technology delivering zero-emissions, ultra-efficient, and dispatchable power. Our work unlocks a future where abundant, clean, reliable, and affordable power is not just a goal, but the global standard. We are building a dedicated team grounded in professional excellence, integrity, and collaboration. If you are driven to make a lasting impact on humanity's future and thrive in a fast-moving, results-oriented environment, we invite you to join us. Headquartered in the San Francisco Bay Area, Noble Thermodynamics is a cleantech innovator backed by the U.S. Department of Energy and the California Energy Commission, with leading partners across industry and academia, including the Electric Power Research Institute, Sempra Energy, Argonne National Lab, Sandia National Lab, and others.

Richmond, CA, USA

$130,000/year

Cabinet Vision Engineer (Fairfield)63844716350979122

Craigslist

Cabinet Vision Engineer (Fairfield)

Production Cabinet Manufacturing Company looking for person with Cabinet Vision experience and related software for residential custom cabinetry. -Drive company vehicle as needed, verified clean DMV -Work schedule is 10 hours a day from 6:30 am to 4:30 pm, Monday through Thursday -View our website at www.woodlinecabinets.com -Qualified candidates can email resume Qualifications -Strong skills utilizing CAD (Cabinet Vision preferred) -Effectively communicate with contract administrators and contractors -Job site field measuring experience -Read and take off blueprints -Estimating skills a plus Benefits: Dental insurance Health insurance Paid time off Work Location: In person onsite

5165 Fulton Dr, Fairfield, CA 94534, USA

$40-45/hour

wmtaEngineer in Training Part-Time (san rafael)63772645116547123

Craigslist

wmtaEngineer in Training Part-Time (san rafael)

Engineering Training: AutoCAD/LiDAR Drafter & Assistant - Part-Time (San Rafael/SF Bay Area) - For Students & Recent Grads compensation: $25-35/hour (based on experience; recent grads with skills start higher) employment type: part-time (20 hours/week) - could go full-time in 6 months location: San Rafael (in-office to start for training, then remote/flexible) posting date: September 18, 2025 We're a cool consulting firm in the SF Bay Area doing underground and civil construction projects. We're specifically seeking an engineering student or recent graduate (civil, mechanical, construction, or related fields) who's sharp, detail-focused, and pumped about cutting-edge tech. If that's you, join us for some wild LiDAR scanning and engineering gigs—where you'll get hands-on training and development to build into a full engineering experience that launches your career! LiDAR's like a Swiss Army Knife for jobsites: nails site surveys, syncs BIM models to designs, checks build quality, tracks progress, spots issues, and logs changes on the fly. We'll train you up on the tools and techniques to turn your classroom knowledge into pro-level skills. Must-haves: Know AutoCAD/Revit basics for construction drawings (class projects or internships count!). Authorized to work in the US. Valid US driver's license. Good at talking/writing clearly. Juggle projects solo, take direction, and love learning. Act pro and mature. Bonus if you have: AutoCAD 2025 and some Revit experience. Currently enrolled or just graduated in an engineering program. Pay's solid based on what you bring, with growth potential. Flexible around classes/schedules. Starts part-time but ramps up quick, with structured training to develop you into a full-fledged engineer. Reply here with your resume, quick note on why you're into this (like a project or class), and when you can start. Let's make some groundbreaking stuff!

12 Alta Vista Way, San Rafael, CA 94901, USA

$25-35/hour

Treehouse Designer (petaluma)63685023354371124

Craigslist

Treehouse Designer (petaluma)

Blending the most current engineering methodologies with traditional craftsmanship and purposeful design, O2 Treehouse has constructed dozens of structures around the globe since beginning work in 2005. Central to the firm's philosophy is advancing harmony with the natural world and fostering stronger relationships through time spent at a new elevation. Learn more about us and check out our portfolio of work at https://o2treehouse.com. We are an innovative organization that develops products for the growing outdoor hospitality market. We are looking for a designer who is interested in getting in on the ground floor of a growing company that has clients across the United States. The Designer will work closely with senior designers to generate concept and fabrication documents to be used by our in-house fabrication and installation teams. Job Description: - Provide designs and renders for structures proposed to clients - Generate fabrication and construction documents to be used by in-house shop and vendors - Work with structural engineers to verify design integrity - Support shop during construction phase of projects - Support field teams during the installation process by providing design guidance and quick turnaround solutions. Requirements: - 3-5 years experience generating 3D concepts drawings and 2D Fabrication drawings. - High level understanding of Rhino, Sketch-up or equivalent design software packages. - 3-5 years of Hands-On Construction/Fabrication Experience - Experience working with various material, wood, metal, glass, etc - Experience managing vendors - Fluent using Google Apps and Slack - Strong communication and interpersonal skills, with the ability to collaborate effectively - Positive attitude - Open to experiencing the highs and lows of a small but quickly growing organization. - College Degree in Architecture, Furniture Design or in related field or equivalent

1524 McGregor Ave, Petaluma, CA 94954, USA

$35-40/hour

ASSOCIATE ENGINEER for Marin Water (corte madera)63470688189441125

Craigslist

ASSOCIATE ENGINEER for Marin Water (corte madera)

Associate Engineer Design Dept, Engineering Division Two Positions Available Salary range: $11,492 - $13,881 per month Who we are Marin Water delivers clean water to more than 190,000 people in central and southern Marin County and manages more than 18,000 acres of land on the Mount Tamalpais Watershed, where most of our local water is sourced. As California’s first municipal water district, chartered in 1912, our proud history of service is upheld by our dedicated staff of nearly 250 employees across 25 departments. We are committed to our core values of health and safety, stewardship, innovation, efficiency and responsiveness, accountability, respect, listening and learning, and working together to anticipate the challenges ahead and achieve our mission. Explore a meaningful career with Marin Water and join us in our mission to manage the lands, water, and facilities in our trust to provide reliable, high-quality water and adapt and sustain these precious resources for the future. The community we serve Marin County is a special place known for its striking natural beauty, an active and engaged community, characteristic towns, farm fresh food, thriving arts and outstanding schools. Nestled on a peninsula in the northwest corner of the San Francisco Bay Area, Marin is easily accessible by bike, car, bus, train and ferry. Mount Tamalpais, home to our primary source of water, stands at the center of Marin and is treasured by our community. The role Join a design team leading the delivery of critical infrastructure projects in one of the most scenic and technically challenging regions in California. Over the next two years, the District’s Design Department will be advancing a diverse capital program estimated at $65 million, including: Upcoming 2-Year Capital Program Projects • Miracle Mile Pipeline Replacement – $6M • Hind Tanks Replacement – $6M • Mill Valley Tank Rehabilitation – $6M • Bon Tempe Treatment Plant Upgrades – $4.3M • San Geronimo Treatment Plant Clarifier Replacement – $9.5M • Federal Work Pump Station Improvements – $5M • Pine Mountain Tunnel Decommissioning – $5M These projects span potable water storage, transmission, treatment, and system optimization—providing excellent opportunities for licensed engineers to lead meaningful design work from concept through construction. The ideal candidates will possess these desired competencies: • Deep knowledge of civil engineering principles, especially in water system planning, design, construction, and operations. • Ability to lead teams or consultants on engineering projects. • Ability to conduct complex technical research, analyze data, and present clear recommendations. • Ability to prepare and review designs, specifications, and cost estimates with attention to detail. • Ability to work independently and as part of a team. Typical Duties • Directs or performs the preparation of project schedules, designs, construction plans, cost estimates, specifications and bidding documents for a variety of District projects; • Prepares Requests for Proposals for consultants and administers consultants' work on projects; • Principles, practices, regulations and methods of engineering work in the areas of assignment as applied to the design and construction, operation and water quality of water systems projects, or field operations involved in the construction and maintenance of water system facilities. Please refer to the position’s job description for the full job description details. Qualifications Any combination equivalent to experience and education that could likely provide the required knowledge and abilities would be qualifying. A typical way to obtain the knowledge and abilities would be: • A Bachelor's degree in an engineering curriculum which is accredited by the Accreditation Board for Engineering and Technology (ABET); AND • Three years of increasingly responsible engineering experience in the areas of assignment relating to water system facilities planning, design and construction, or water quality, including one year of supervisory and/or project management experience. A Special Note for Out-of-State Engineer Applicants: This position requires a valid Professional Civil Engineering License in the State of California, however Professional Civil Engineering Licenses from outside of California will be considered at the Assistant Engineering position level, with the opportunity to advance to the Associate Engineer position once the incumbent has met the requirements and has obtained the certification for Professional Civil Engineer in the State of California. To apply Based on the information provided in the application, the best-qualified applicants will be invited for further examination. Depending upon the number of applications received, the examination may consist of an application screening, oral interview, or any combination. This position requires a background check, and a medical exam prior to appointment. Candidates must submit an online application https://www.governmentjobs.com/careers/marinwater/jobs/5014349/associate-engineer?pagetype=jobOpportunitiesJobs The deadline to apply is: MONDAY, September 8, 2025 at 11:59 PM. If you need a reasonable accommodation for any portion of the testing/interview process, please contact Human Resources at (415) 945-1434 at least two weeks prior to the application deadline or examination date.

1585 Casa Buena Dr, Corte Madera, CA 94925, USA

$11,492-13,881/month

Client Relationship Manager with Strong Construction Estimating Skills63587892162435126

Craigslist

Client Relationship Manager with Strong Construction Estimating Skills

Seeking Driven Client Relationship Manager with Strong Estimating Skills for Construction Industry Leader Are you a sharp, ambitious professional with a passion for construction and a talent for building lasting relationships? Our firm is an established General Contractor known for delivering superior quality that attracts a discerning clientele. Our core differentiator, however, is a steadfast commitment to transparent and continuous communication, which forms the bedrock of our long-term client partnerships. We are seeking a professional Client Relationship Manager to represent our brand and ensure an exceptional client experience. This is more than a job; it's a career path for highly skilled construction professional with sharp estimating and sales skills, a motivated, high-energy individual with an entrepreneurial spirit. We're looking for someone who is ramping up their career and wants to grow with us for the long haul, with future ownership potential for the right person. What You'll Do:  Be the First Impression: From the initial phone call to the final handshake, you will guide our clients with professionalism and genuine engagement.  Drive Projects with Precision Estimating: Take the lead on creating and delivering flawless, detailed estimates. Your ability to accurately assess project scope, materials, and labor is critical. You understand that a transparent and well-crafted estimate is the foundation of a successful project and a direct representation of our brand's commitment to quality.  Build Trust: Develop and nurture client relationships founded on transparency and consistent follow-through.  Drive Success: Proactively manage client expectations, solve problems, and take ownership of the entire client experience. Are You the Right Fit? We're not just looking for a resume; we're looking for a mindset. The ideal candidate is:  A Big Picture Thinker: You are sharp, focused, and understand how to drive a process from start to finish.  An Analytical Construction Estimator: You possess strong analytical skills and a meticulous eye for detail, understanding that accurate estimating is crucial for client trust and project success. Direct experience in construction estimating is required.  Proactive & Hungry: You have a relentless, success-driven mindset, a hunger to learn, and you thrive on getting results.  A Natural Communicator: You are personable, well-spoken, and your written communication is polished and professional (MS Word and email skills are a must).  Deeply Motivated: You take ownership of your work and are looking for a long-term opportunity to build a successful career. You have a demonstrated, continuous passion for the construction industry. This is a unique opportunity to join a respected company where your contribution directly impacts our success. If you are a career-oriented individual ready to take ownership and build a future in the construction industry, we want to hear from you. To Apply: Please submit your resume and a cover letter detailing why you are the ideal candidate. We are looking forward to hearing from you.

960 Avis Dr, El Cerrito, CA 94530, USA

$125,000-135,000/year

Design Staff - Landscape Architect - 2G4S00463392062442499127

Workable

Design Staff - Landscape Architect - 2G4S004

Snipebridge, a strategic talent solutions company specializing in connecting exceptional talent to great career opportunities in the Architecture & Planning industry, is seeking an experienced Design Staff - Landscape Architect. Our Client is an award-winning landscape architecture studio that is celebrated for its innovative and site-sensitive designs. With a presence across multiple offices in California, the firm is dedicated to creating unique, client-focused landscapes that enhance both natural and built environments. Known for its rigorous attention to design excellence, project management, and seamless collaboration, the studio brings a refined approach to every project, regardless of scale or location. POSITION OVERVIEW: This position is an opportunity for a highly motivated, engaged designer to be a thought partner on compelling design projects in a collaborative studio, while building their technical acumen through thoughtful work on landscapes at a variety of scales, phases, and typologies in some of the most beautiful locations in the world. PRIMARY RESPONSIBILITIES: Work directly under the project managers in a collaborative role producing: Site analysis drawings Project research Schematic design presentations 2D graphics 3D digital models Construction documents Presentation materials Exercise discretion and independent judgment in the performance of duties Assist with client meetings and site reconnaissance Possess a general understanding of the basic principles of landscape architecture is required, including: Site design Grading and drainage Plant material Working drawings Construction materials Construction details SKILLS REQUIRED IN THE FOLLOWING: MAC OSX Vectorworks Landmark, current year SketchUp MS Office Suite Adobe Design Suite Hand sketching and lettering Strong leadership and communication skills QUALIFICATIONS REQUIRED: A Bachelor’s or Master’s Degree in Landscape Architecture or Architecture A minimum of 3 years experience in the residential design sector Proven experience documenting and detailing projects Benefits This is a full-time in-person position in the firm's Napa or Monterey studio with a competitive salary that is commensurate with experience. The firm follows a Compressed Work Week that typically allows for every other Friday off. Company benefits include paid time off, medical, dental, vision, and term life insurance coverage. Our company perks include education and wellness stipends, the potential for yearly bonuses, and participation in a 401K retirement plan. Final salary decisions are made based upon the extent and relatedness of the candidate’s education and experience and considering internal equity and external market factors.

Napa, CA, USA

Negotiable Salary

Senior Instrumentation and Controls Engineer63392048205187128

Workable

Senior Instrumentation and Controls Engineer

Noble Thermodynamics is seeking a Senior Instrumentation and Control (I&C) Engineer to play a pivotal role in the development and deployment of the Argon Power Cycle™—a new benchmark in zero-emission power generation. In this role, you will lead the design, implementation, and validation of advanced industrial power control and automation systems. You will collaborate closely with a multidisciplinary engineering team, external partners, and contractors to develop systems that meet stringent performance, safety, and regulatory standards. You will also provide technical oversight to ensure the successful implementation of SCADA systems. Your contributions to automation and controls will directly influence the speed and scale at which zero-emission power plants are deployed across the United States and internationally. Success in this role will help expand affordable access to clean, safe, and reliable energy by enhancing system flexibility, improving operational efficiency, and driving down costs—while delivering measurable, large-scale reductions in global air pollutants and carbon emissions. Responsibilities In this role, you will work as part of a multi-disciplinary team as the lead I&C engineer for multiple concurrent projects and are expected to fulfill the following responsibilities: Serve as lead I&C engineer across multiple concurrent development and deployment projects. Design control system architecture (e.g., PLC, DCS, SCADA) and network topology following industry standards (e.g., NEC, ISA) and best practices Lead programming and troubleshooting of PLCs, DCS systems, and SCADA interfaces using Modbus, CANbus, and other protocols. Generate detailed I&C engineering deliverables (e.g., control philosophy, control narratives, P&IDs, instrumentation list, loop diagrams, wiring diagrams, cause an effect matrix, I/O lists, panel layouts, etc.) following industry standards and best practices Develop specifications and select field instrumentation and communication components (e.g., process sensors, actuators, transmitters, cable/wires, enclosures, etc.) Participate in safety reviews (e.g., HAZOP, FAT, SAT) and PSM activities as required Prepare external-facing technical reports, presentation materials, permitting documents, patent drafts and other deliverables Interface and coordinates with relevant external contractors and project partners, ensuring that all I&C relevant projects meet quality standards and follow approved designs and execution plans Requirements To succeed in this role, you will need the following set of qualifications and demonstrated technical expertise: Bachelor’s degree or higher in Electrical, Mechanical or Control System Engineering from an accredited institution 10+ years of electrical and I&C experience, including experience across full EPC design/build project lifecycle leading the design of industrial I&C systems in any of the following industries: Powergen, Oil & Gas, Chemical, or EPCM Proficiency with plant control and automation systems (i.e., PLC or DCS), and industry-standard networking communication protocols (e.g., Modbus) and programming languages (e.g., phyton, matlab-simulink, etc.) Demonstrated experience with design, assembly, troubleshooting and commissioning of real SCADA systems. Proven track record in design and production of tender documents (e.g., control philosophy, control narratives, P&IDs, instrumentation list, loop diagrams, wiring diagrams, cause an effect matrix, I/O lists, panel layouts, etc.) following industry standards and best practices (e.g., UL, IEC, ISO, IEEE, etc.) Expert knowledge in the selection and specifications for instrumentation and actuators (meters, temperature, pressure, flow, analytical instrumentation and control valves) Experience with PHA reviews, plant startup and commissioning, and field operation This role demands the following core competencies: Excellent and effective verbal and written communication, with the ability to present complex ideas in a compelling manner to the relevant audience. Proactiveness in presenting and advocating for new ideas and initiatives, skilled at persuading a diverse set of stakeholders vertically and across, driving decision-making. Organization; skilled at planning and coordinating within cross-disciplinary teams to improve collective outcomes Resiliency under pressure, maintaining clarity, decisiveness, and following-through when facing tight deadlines or high-stakes challenges Resourceful and avid learner, explorer of new and adjacent knowledge that materialize into team value and individual growth. An exceptional candidate would also bring the following skills: Deep knowledge of real-time control systems, including implementation of state machines in Python, LabVIEW, C/C++, or equivalent Experience with I&C systems for reciprocating and rotary equipment Employment Conditions Authorized to work in the United States, Must be willing and able to travel to project sites as needed Must be willing and able to conduct field work including lifting heavy objects up to 50 lbs, climbing ladders, and navigating active construction or industrial sites Must be willing and able to work longer hours and weekends when needed to support key project milestones and ensure successful project delivery Benefits Salary range: $130,000 to $190,000 Health Care Plan (Medical, Dental & Vision) Retirement Plan (401k, IRA) Paid Time Off (Vacation, Sick & Public Holidays) Stock Option Plan About Noble Thermodynamics At Noble Thermodynamics, we are on a mission to radically and rapidly decarbonize the world’s power needs. We are bringing to market the Argon Power Cycle™—our breakthrough in power generation technology delivering zero-emissions, ultra-efficient, and dispatchable power. Our work unlocks a future where abundant, clean, reliable, and affordable power is not just a goal, but the global standard. We are building a dedicated team grounded in professional excellence, integrity, and collaboration. If you are driven to make a lasting impact on humanity's future and thrive in a fast-moving, results-oriented environment, we invite you to join us. Headquartered in the San Francisco Bay Area, Noble Thermodynamics is a cleantech innovator backed by the U.S. Department of Energy and the California Energy Commission, with leading partners across industry and academia, including the Electric Power Research Institute, Sempra Energy, Argonne National Lab, Sandia National Lab, and others.

Richmond, CA, USA

$130,000-190,000/year

Workable

Engineering Manager

BKF Engineers is seeking an Engineering Manager to join our Transportation team! BKF Engineers is seeking an Engineering Manager to provide technical leadership within our transportation team. This role focuses on delivering complex roadway and multimodal projects, supporting project managers, and mentoring engineering staff. The ideal candidate has expertise in complete streets design, multimodal transportation, transit facilities, and agency coordination. Key Responsibilities: Lead technical design efforts for multimodal corridors, complete streets, bike and pedestrian facilities, and transit-oriented improvements. Alternatively, take a lead role in the design of transit centers, ferries, ports, and airport landside improvements. Work closely with project managers to ensure projects stay on schedule, within budget, and meet agency requirements. Mentor and develop engineering staff, providing guidance on roadway design, active transportation, and stormwater integration. Ensure compliance with Caltrans, FHWA, CPUC, UPRR, and local agency design standards. Perform quality control reviews to ensure accuracy, efficiency, and regulatory compliance. Coordinate with environmental teams, right-of-way specialists, and permitting agencies to navigate complex project requirements. Travel to various project sites and offices as needed. Requirements 7+ years of experience in transportation planning, utility infrastructure, drainage, and design of roadways, railways, trails, and/or similar projects. B.S in Civil Engineering or related field from an ABET Accredited Curriculum or equivalent required. Professional Engineer (PE) license in the state of California highly preferred. Out-of-state PE will be considered. Strong experience in complete streets, multimodal design, and roadway or transit infrastructure projects. Proficiency in AutoCAD and Civil 3D (or similar design software). Physical Demands: Must be able to regularly talk, hear and operate a computer, keyboard and mouse and occasionally lift, pull/push and carry up to 20 pounds with accommodations. Work Conditions: Exposure to constant or intermittent sounds at a low or moderate level consistent with an office setting. Exposure to high-stress, fast-paced, deadline-oriented environment. Travel to other BKF locations and client sites may be required. Benefits The typical base salary range for this position is $113,000 - $164,000 annually, depending upon skills, experience, education, and geographical location. This is a salary position paid biweekly. Competitive salaries, end of year bonuses, profit sharing, and 401k. BKF pays 100% of the premiums for medical, dental, and vision coverage and 50% for your dependents. Generous vacation and sick time packages. 8 Paid Holidays. Flexible schedules. Opportunity to participate in a 4x10 schedule (FRIDAYS OFF!) Education reimbursement, Paid annual dues for professional and societal organizations. BKF offers competitive and award-winning benefits and perks. To learn more click here. Workplace Awards: We’re proud to be a 2024 - 2025 "Great Place To Work" certified company! BKF Engineers wins Zweig Group’s 2023 Trifecta Award Zweig "Best Firms to Work For" Top 100 in the U.S. 2023 Bay Area News Group "Top Work Place” for 7 years in a row! "Best Firm to Work for North Bay" North Bay Business Journal for 8 years BKF Engineers provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. BKF Engineers does not accept unsolicited resumes from recruiters or employment agencies. In the event a recruiter or agency submits a resume or candidate without a previously signed agreement and a specific solicitation for the position or other approved engagement request for the position with BKF Engineers, BKF Engineers reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. Any unsolicited submittals are done at the risk of the recruiter. #LI-Hybrid

Santa Rosa, CA, USA

$113,000-164,000/year

Senior Piping Engineer633920284711691210

Workable

Senior Piping Engineer

Noble Thermodynamics is seeking a Senior Piping Engineer to lead the design, engineering, and implementation of high-performance piping systems central to the deployment of the Argon Power Cycle™—our groundbreaking, zero-emissions power generation technology. In this role, you will take full ownership of piping systems across different and concurrent projects, from early conceptual design through construction, commissioning, and operations support. You will develop efficient piping systems that reduce cost and maintenance intervals, increase reliability, and enable system packability all the while maintaining system accessibility, serviceability, and safety. You will provide technical oversight ensuring successful piping system implementation during construction and operation of the plants. Your contributions to the piping system design will directly impact the scalability, safety, and efficiency of the world’s cleanest and most efficient power plant. Your successful execution in this role will radically accelerate the Argon Power Cycle™ deployment and expand affordable access to clean and reliable power, delivering measurable, large-scale reductions in global air-pollutants and carbon emissions. Responsibilities In this role, you will lead piping engineering activities across several fast-paced, multidisciplinary engineering projects: Own the end-to-end design and engineering of piping systems: layout, stress analysis, material selection, and routing for high-temperature and high-pressure and cryogenic systems. Generate Mechanical/Piping Engineering Packages including deliverables such as P&IDs, plant layouts, isometrics, GADs, material specifications, MTOs, and 3D models in coordination with internal and external teams. Conduct stress analysis (static and dynamic) using industry-standard tools (e.g., CAESAR II) and validate designs per ASME B31.3/B31.1/B31.12 and other relevant codes. Collaborate with process, instrumentation, structural, and electrical engineers to ensure seamless integration of piping systems within the plant design Participate in HAZOPs and constructability reviews; support safety and operability assessments (e.g., PSSR) as required Review vendor deliverables, evaluate supplier technical proposals, and oversee fabrication and installation QA/QC activities, ensuring that all projects meet quality standards and follow approved designs and execution plans Lead and maintain documentation, including technical specifications, procedures, redlines, and as-built drawings. Drive the development and implementation of design standards, workflows, and quality control practices across the piping discipline. Prepare external-facing technical reports, presentation materials, permitting documents, patent drafts and other deliverables Support field activities during construction and commissioning; troubleshoot design issues and resolve site queries in real time. Requirements To succeed in this role, you will need the following set of qualifications and demonstrated technical expertise: Bachelor’s degree or higher in Mechanical Engineering or a similar engineering field from an accredited institution 10+ years of piping system design experience, including experience across full project lifecycle, from FEED to commissioning, leading the piping design of industrial plants in any of the following industries: Powergen, Oil & Gas, Chemical, or EPCM Proficiency in 3D modeling and piping design tools (e.g., SolidWorks, AutoCAD, Navisworks, or similar), and pipe stress analysis software (e.g., CAESAR II, AutoPIPE or similar) Working knowledge of governing industry codes and standards applicable to plant design and piping systems (i.e., ASME B31.1/B31.3/B31.12/BPVC, ASTM, API, NACE/AMPP, CGA, PIP) and other mandatory technical specifications Experience in developing specifications for process and utility piping, piping insulation, piping hangers and supports, and piping fabrication Extensive experience preparing high-quality piping engineering deliverables such as isometrics, GADs, piping layouts, etc, following engineering and industry-specific best practices and standards This role demands the following core competencies: Fundamental knowledge of gas dynamics, structural dynamics, and material science. Excellent and effective verbal and written communication, with the ability to present complex ideas in a compelling manner to the relevant audience. Proactiveness in presenting and advocating for new ideas and initiatives, skilled at persuading a diverse set of stakeholders vertically and across, driving decision-making. Organization; skilled at planning and coordinating within cross-disciplinary teams to improve collective outcomes Resiliency under pressure, maintaining clarity, decisiveness, and following-through when facing tight deadlines or high-stakes challenges Resourceful and avid learner, explorer of new and adjacent knowledge that materialize into team value and individual growth. An exceptional candidate would also bring the following skills: Experience with high-temperature, high pressure, and cryogenic piping systems Experience with rotary and reciprocating equipment Employment conditions Authorized to work in the United States Must be willing and able to travel to project sites as needed Must be willing and able to conduct field work including lifting heavy objects up to 50 lbs, climbing ladders, and navigating active construction or industrial sites Must be willing and able to work longer hours and weekends when needed to support key project milestones and ensure successful project delivery Benefits Salary range: $130,000 to $190,000 Health Care Plan (Medical, Dental & Vision) Retirement Plan (401k, IRA) Paid Time Off (Vacation, Sick & Public Holidays) Stock Option Plan About Noble Thermodynamics At Noble Thermodynamics, we are on a mission to radically and rapidly decarbonize the world’s power needs. We are bringing to market the Argon Power Cycle™—our breakthrough in power generation technology delivering zero-emissions, ultra-efficient, and dispatchable power. Our work unlocks a future where abundant, clean, reliable, and affordable power is not just a goal, but the global standard. We are building a dedicated team grounded in professional excellence, integrity, and collaboration. If you are driven to make a lasting impact on humanity's future and thrive in a fast-moving, results-oriented environment, we invite you to join us. Headquartered in the San Francisco Bay Area, Noble Thermodynamics is a cleantech innovator backed by the U.S. Department of Energy and the California Energy Commission, with leading partners across industry and academia, including the Electric Power Research Institute, Sempra Energy, Argonne National Lab, Sandia National Lab, and others.

Richmond, CA, USA

$130,000-190,000/year

R2: Foreman / Superintendent634998139235851211

Workable

R2: Foreman / Superintendent

Are you looking for the next step in your career as a Foreman / Superintendent? Or, are you looking for the next big opportunity? Have you built significant experience in construction projects and are looking to expand your skill set? Essel is looking for a construction Foreman / Superintendent with experience managing mid to large scale projects to join our team! The Foreman / Superintendent could lead in the the following industries: - Multifamily - Tentative Improvements - Ground ups - Podium - Colleges and K-12 Duties will include but not limited to: - Coaching subcontractors on safe construction practices - Quality control, ensuring all subcontractor deficiencies are corrected - Maintaining the project schedule and establishing the critical path for subs and vendors - Facilitating and encouraging subcontractor coordination - Working with design team and owner to overcome challenges / unforeseen conditions - Reviewing all drawings, specifications and submittals - Daily progress reports and weekly schedule updates Requirements 5-10 years construction experience 3-5 years supervisory experience Strong communications skills, both written and verbal Complete and detailed experience with subcontractor and construction sequencing Understanding of ASI’s RFI’s and Material Submittals Technology: Experience with Microsoft Office, MS Project and Procore Experience with CMAR and/or Design/Build delivery methods Benefits Industry competitive benefits

Santa Rosa, CA, USA

Negotiable Salary

Senior Process Engineer634997892960031212

Workable

Senior Process Engineer

Noble Thermodynamics is seeking a Senior Process Engineer to play a pivotal role in the development and deployment of the Argon Power Cycle™—a new benchmark in zero-emission power generation. In this role, you will take charge of key responsibilities, starting with process design, including performing process simulations, analyzing process data, and preparing process control narratives. You will develop essential engineering documentation (e.g., PFDs, H&MBs, etc.) and conduct safety reviews (e.g., HAZOP) to ensure safe, reliable, and code compliant designs. You will provide technical oversight ensuring successful process implementation during construction and operation of the plants. Finally, you will create cost estimates and conduct lifecycle and techno-economic analyses to evaluate the competitiveness and positive environmental impact of different process designs. Your contributions to process design, optimization, and operational readiness will directly influence the construction of a scalable fleet of zero-emission power plants across the United States and abroad. Successful execution in this role will expand affordable access to clean and reliable power, by improving energy system reliability and cost competitiveness while also delivering measurable, large-scale reductions in global air-pollutants and carbon emissions. Responsibilities In this role, you will work as part of a multi-disciplinary team as the lead process engineer for multiple concurrent projects and are expected to fulfill the following responsibilities: Design and optimize engineering processes using commercial process simulation tools Generate detailed engineering documents, including Design Basis, PFDs, HMBs, Control Narratives, and P&IDs following industry standards and best practices Perform sizing calculations and prepare relevant data sheets for piping, instrumentation, equipment, etc. Lead safety reviews, HAZOP and PSM activities as required Provide technical oversight for process operations, including monitoring, troubleshooting, and conducting root cause analysis Prepare M&V plans, analyze process data, and validate and calibrate associated process models Prepare external-facing technical reports, presentation materials, permitting documents, patent drafts and other deliverables Interface and coordinates with relevant external contractors and project partners, ensuring that all projects meet quality standards and follow approved designs and execution plans Perform cost estimates, TEA and LCA following relevant best practices (e.g., AACE guidelines) Lead and/or participate in the preparation of engineering project bids Requirements To succeed in this role, you will need the following set of qualifications and demonstrated technical expertise: Bachelor’s degree or higher in Chemical Engineering or a similar engineering field from an accredited institution 15+ years of process design and optimization experience, including hands-on experience across the full project lifecycle in any of the following industries: Powergen, Oil & Gas, Chemical, or EPCM Proficiency in using process design and modeling tools (e.g. Aspen Plus, ChemCAD, AutoCAD) for the design and evaluation of new and existing processes Familiarity with relevant industry standards and design codes (e.g. ISO, ANSI, CGA, PIP, ISA, CBC, etc.) Extensive experience preparing high-quality process engineering deliverables for FEED projects, such as PFDs, H&MBs, control narrative, and P&IDs following engineering and industry-specific best practices This role demands the following core competencies: Comprehensive fundamental knowledge of chemistry and thermodynamics Excellent and effective verbal and written communication, with the ability to present complex ideas in a compelling manner to the relevant audience Proactiveness in presenting and advocating for new ideas and initiatives, skilled at persuading a diverse set of stakeholders vertically and across, driving decision-making Organization; skilled at planning and coordinating within cross-disciplinary teams to improve collective outcomes Resiliency under pressure, maintaining clarity, decisiveness, and following-through when facing tight deadlines or high-stakes challenges Resourceful and avid learner, explorer of new and adjacent knowledge that materialize into team value and individual growth An exceptional candidate would also bring the following skills: Experience designing, modeling and/or testing carbon capture and purification processes Experience with patent applications Proficiency with scientific programming, using languages such as C++ or similar Employment conditions Authorized to work in the United States Must be willing and able to travel to project sites as needed Must be willing and able to conduct field work including lifting heavy objects up to 50 lbs, climbing ladders, and navigating active construction or industrial sites Must be willing and able to work longer hours and weekends when needed to support key project milestones and ensure successful project delivery Benefits Salary range: $130,000 to $190,000 Health Care Plan (Medical, Dental & Vision) Retirement Plan (401k, IRA) Paid Time Off (Vacation, Sick & Public Holidays) Stock Option Plan About Noble Thermodynamics At Noble Thermodynamics, we are on a mission to radically and rapidly decarbonize the world’s power needs. We are bringing to market the Argon Power Cycle™—our breakthrough in power generation technology delivering zero-emissions, ultra-efficient, and dispatchable power. Our work unlocks a future where abundant, clean, reliable, and affordable power is not just a goal, but the global standard. We are building a dedicated team grounded in professional excellence, integrity, and collaboration. If you are driven to make a lasting impact on humanity's future and thrive in a fast-moving, results-oriented environment, we invite you to join us. Headquartered in the San Francisco Bay Area, Noble Thermodynamics is a cleantech innovator backed by the U.S. Department of Energy and the California Energy Commission, with leading partners across industry and academia, including the Electric Power Research Institute, Sempra Energy, Argonne National Lab, Sandia National Lab, and others.

Richmond, CA, USA

$130,000-190,000/year

Electrical and Electro-mechanical Technician634999061687071213

Workable

Electrical and Electro-mechanical Technician

Job Description: Technician to work on Rail electrical and electro-mechanical installations, execute test procedures, generate test reports, make adjustment on systems and troubleshoot rail vehicles and/or its subsystems. Generate/Track progress reports to management. Responsibilities: Perform mechanical installations and repairs on rail vehicles at an acceptable level of quality and within agreed method times as directed by Supervisor. Demonstrate good working knowledge and experience with the use of hand and power tools, welding machines, measuring devices and pneumatic/hydraulic gauges Must be able to read and comprehend a wide range of mechanical drawings and work instructions. Understand the purpose of the Bill of Material (BOM) and how it relates to material picking lists and operations list. Identify and record information such as part numbers and serial numbers. Any and all other responsibilities, in addition to those mentioned above, as assigned by supervisor/manager. Any interpretation/clarification with responsibilities above will be settled by the supervisor/manager. Perform and generate reports on all routine tests and testing activities. Troubleshoot manufacturing & component problems to the lowest Line Replaceable Unit (LRU), and support during qualification tests. Execute tests according to test procedures and schematics. Redline test procedures as required. Demonstrate good working knowledge and experience with the use of computers, data recorders, digital millimetres, various measurement instruments, pneumatic/hydraulic gauges. Reading and understanding of schematics and wire lists Clearly document and report any anomaly or failure during test execution. Responsible for learning curve and optimization of test execution and troubleshooting. Accountable for test execution, must have strong knowledge and comprehension of schematics, block diagrams, wire lists, functional diagrams along with knowledge of basic Electronics and the operation of12VDC-72VDC and 24VAC-480VAC systems. Support mechanical installations and repairs on rail vehicles as directed by Supervisor. Support, installation and terminate of electrical panels, equipment, components, and have good understanding of how they operate in order to troubleshoot any electrical issues. Configuration management

Mare Island, Vallejo, CA 94592, USA

Negotiable Salary