Roofing Field Project Manager –🚚 (San Leandro)

Southern Mail Service, Inc. Full Time - Diesel Mechanic & Mechanic Trainees ⭐️ APPLY NOW ⭐️ Routine Scheduled Wage: $ 20.00 /hour (and up, based on experience) Paid Vacation Paid Federal Holidays Health Insurance Dental Insurance Life Insurance 401 Responsibilities: Running diagnostic tests on diesel engines and interpreting the results to offer suitable solutions Inspecting vehicle systems, including suspensions, steering and exhausts Repairing or replacing vehicle transmissions, brakes, engines and other associated parts Conducting field visits in the case of an emergency or sudden breakdown Test driving repaired vehicles to gauge their performance Completing oil changes, wheel balancing, alignment and brake checks Maintaining records of parts inventory and serviced vehicles Certifications/Qualifications: PM Certification Federal Annual Certification Air Brake Certification Air Condensing 609 Certification ABS Training Electrical Training DPF-DEF Training Computer Software Training: Volvo, Cummins Insite, Detroit Diesel Questions? Contact: Thomas @ (512) 926-8822 This contractor and subcontractor shall abide by the requirements of 41 CFR §§ 60-1.4(a), 60-300.5(a), and 60-741.5(a). These regulations prohibit discrimination against qualified individuals based on their status as protected veterans or individuals with disabilities, and prohibit discrimination against all individuals based on their race, color, religion, sex, or national origin. Moreover, these regulations require that covered prime contractors and subcontractors take affirmative action to employ and advance in employment individuals without regard to race, color, religion, sex, national origin, protected veteran status or disability.

Must know Commercial & Residential. Must be CURRENTLY licensed. By contract or Hourly. 1099 Pay. Everyone applying MUST go through a background check. By applying, you are consenting us to check license status, work history, and any prior felonies. Thank you for your patience and understanding. We will get back to everyone asap. 9-5 www.rumfieldelectric.com Work starts mid October.

We’re looking for solid HVAC Techs who know their way around commercial service work. If you’ve got 3+ years in the trade and you’re hungry for steady hours, good pay, and real benefits, keep reading. (Mid-level & Senior Techs) What You’ll Do: Service and troubleshoot commercial HVAC systems (no installs – just solid service work) Handle maintenance, repairs, and keep our clients running smooth Put your skills to work in a company that values hard workers, not just numbers What We Offer: $25+/hr DOE – paid every week Full-time hours with overtime available Health benefits + 401k Paid time off (because you’ve earned it) A crew that actually has your back What We Need From You: At least 3 years of commercial HVAC service experience EPA certification Reliable transportation & tools A strong work ethic – show up, do quality work, and take pride in it 👉 If you’re the type that wants steady work, fair pay, and a company that respects the trades, hit us up. Send over your info today and let’s talk.

Job Description The Insulation Helper/Installer is an entry to mid-level crew member who supports the Lead Installer in executing spray foam insulation projects. This role is responsible for prep, setup, assistance during spray application, cleanup, and general site support to ensure jobs are completed efficiently, safely, and to company standards. Responsibilities - Assist Lead Installer with daily spray foam operations - Prepare job sites (masking, covering windows, sealing openings, staging materials) - Install fiberglass, Rockwool, and blown-in insulation (training provided if needed) - Load, unload, and organize spray foam equipment and materials - Monitor hoses, spray gun, and machinery during operation - Maintain cleanliness of job site, rig and equipment - Ensure waste disposal and recycling of used materials is handled properly - Refuel generators as needed each day (company pays for fuel) - Occasionally run to our distributors or Home Depot for materials - Complete end-of-day checklist with Lead Installer Required Skills - Must have valid drivers license and clean driving record - Reliable transportation to and from job sites each day (truck required) - Prior construction or trade experience helpful but not required - Use common hand tools such as knives, scissors, saws, and staple guns - Comfortable working in tight spaces, attics, crawlspaces, and on ladders - Strong teamwork and communication skills - Willingness to learn spray foam techniques and advance within company Job Type: Full-time Pay: $750.00 - $875.00 / week ($16-19/hr) If you have the skills and qualifications required for this position, we encourage you to apply.

Better Business Staffing LLC., dba BBS. Overhead Garage Door Installer (with Welding Experience) Bring your mechanical know-how and customer-first mindset to a team that values craftsmanship and safety. As an Overhead Garage Door Installer, you will install, service and repair residential and commercial doors and openers. Diagnosing issues, aligning tracks and springs, and ensuring smooth, secure operation on every job. Each day offers variety, problem- solving and the satisfaction of seeing your work make a visible difference for customers, Install, service, and repair residential and commercial overhead/rolling steel doors, door operators, and dock equipment. Fabricate and weld brackets, frames, and supports as needed. Ensure safe, code-compliant, high-quality work and excellent customer service on every job. Key Responsibilities: • Installation: Install sectional and rolling steel doors, high-speed doors, fire doors, grilles, dock levelers, seals/shelters, and door operators. Set tracks, torsion/extension springs, cables, drums, hinges, rollers, bearings, and shaft assemblies. Align, balance, and commission doors and operators; program remotes, keypads, photo-eyes, safety edges, and control stations. Layout, measure, cut, and anchor angle iron, strut, and tracks to steel, masonry, or wood; drill and set mechanical or epoxy anchors. • Service and Repair: Diagnose and correct issues with springs, cables, operators, controls, limit settings, and safety devices. Perform preventive maintenance and safety inspections; complete fire door annual drop tests per NFPA 80/105 and document results. Emergency after-hours service on a rotational basis as needed. • Welding and Fabrication: Fabricate/repair brackets, frames, track supports, and header/angle assemblies using MIG (primary), Stick, and/or TIG. Weld and fit light structural components, 10–3/8" thickness typical; cut, grind, and finish to spec. Read/interpret shop drawings and blueprints; verify field measurements and adjust/fabricate accordingly. • Safety and Compliance: Follow OSHA, company safety policies, lockout/tagout, fall protection, and rigging best practices. Ensure installations comply with UL 325, DASMA, IDA guidelines, and manufacturer requirements. Maintain clean, safe, and organized job sites and vehicles. • Documentation and Customer Service: Use mobile apps to capture photos, job notes, parts/labor, and customer signatures. Communicate clearly with customers, contractors, and the office regarding scope, change orders, and timelines. • Tools and Equipment: Operate scissor/boom lifts, forklifts, hoists, drills, impact drivers, torque wrenches, grinders, band saws, torches, and welding machines. Perform basic maintenance on tools and welding equipment. Qualifications: • Experience: 2+ years as an overhead/garage door installer or technician; commercial experience preferred. 1+ year hands-on welding/fabrication (MIG required; Stick/TIG a plus). 2-5 years of commercial overhead garage door experience essential Service-oriented. Punctual and detail oriented. Willing to learn and grow with the company. Must be mechanically and/or electrically inclined. Welding and torch cutting experience. Forklift proficiency necessary. • Technical Skills: Proficient with torsion/extension spring systems, shaft assemblies, and door/operator alignment. Comfortable with electrical low-voltage terminations, limit adjustments, photo-eyes, and safety circuits. Ability to read blueprints, wiring diagrams, and interpret manufacturer manuals. Competent in measuring, leveling, squaring, and layout; concrete/masonry anchoring. Licenses/Certifications (preferred or willing to obtain): Valid driver’s license with clean MVR; DOT medical card as required. OSHA 10/30, aerial lift, and forklift certifications. AWS D1.1 or equivalent welding certification preferred. IDA/DASMA/Manufacturer certifications a plus. NFPA 80 drop-test training a plus. Soft Skills: Strong troubleshooting and problem-solving; detail-oriented and safety- focused. Professional communication and customer service; team player. Able to work independently with minimal supervision. Service, repair, and install loading dock levelers, sectional overhead doors, rolling steel doors, commercial high-speed doors, etc. Confirm daily work orders with dispatch. Retrieve products from suppliers. Safely transport and deliver products to job sites. Inspect the job site to confirm any potential issues. Install products efficiently and professionally. Deliver great customer service. Executes safety forms and procedures on all job sites. Work on ladders at all heights (8' - 24') as well as scissor lifts and aerial platforms up to 40’. Remove and haul off old doors and openers. Physical Requirements and Work Conditions: Lift and carry 75+ lbs., frequent bending, kneeling, and overhead work. Comfortable working at heights on ladders, scaffolds, and lifts. Work indoors/outdoors in varying weather, exposure to noise, dust, and metal fabrication environments. Use of PPE including gloves, eye/ear protection, respirators as required. Schedule and Travel: Full-time; typical Monday–Friday with occasional overtime and on-call rotation. Monday through Friday, 7 am to 3:30 pm. Competitive hourly wage is $28.00 to $34.00 per hour plus overtime. Must be a U. S. Citizen. Must pass a background check, absolutely no felonies and pass a drug screen test.

Great opportunity for roofers with experience to get on the path to becoming an electrician. Must have valid drivers license, reliable transportation. Follow the link to fill out an application: https://nativesolar.com/careers/ I