Cannabis Business Seeking Full-Time Production Specialist (Eliot, ME & Georgetown, MA)

Please apply at: https://secure7.saashr.com/ta/6206871.careers?CareersSearch=&lang=en-US Summary: Leads Injection Molding and Automation (IM&A) team members on required tasks, work orders, and daily 5S upkeep with all IM&A processes.  Performs and trains team on machine set-up, in-process production quality inspections, machine tear down, troubleshooting, maintenance, and workflow. DUTIES and RESPONSIBILITIES •           Directs production Work Order execution with prioritization from Production Manager, coordinates supporting equipment setup and line clearance operations, and team activities for equipment preventative maintenance. •           Participates in Production Planning meetings to provide Work Order execution status and scheduling updates. •           Participates hands-on in IM&A activities including work order execution, process equipment setup and shut down operations, mold/material/tooling changes, troubleshooting, equipment maintenance, and required quality assurance activities. •           Sustains on-going training and development of IM&A team members on all injection molding and machine automation processes, along with required quality assurance inspections to confirm production parts meet LEMO quality standards and dimensional requirements per drawings. •           Monitors processes at start up, production, and shut down to ensure the proper operation of injection molding and over-molding machines, automated pin insertion machines, and other IM&A work area process equipment. •           Collaborates with Engineering and Quality to investigate root causes of molding and secondary operation issues; helps with implementing corrective actions and process control plans. •           Provides input and participates in continuous improvement projects on cycle time reduction, process and machine up-time improvements, and scrap/waste reduction •           Follows all policies and work rules including but not limited to safety, 5S (housekeeping), Lean Manufacturing practices and quality systems •           Assists with new mold samples, verifies that process parameters are set per the process qualification documentation, collects and provides requested documentation of results. •           Other duties as assigned See job posting for more specific details and job qualifications. Company Overview: LEMO is a privately owned Swiss company, located in Sonoma County among the rolling hills of Northern California's wine county, centrally located just 45 minutes north of San Francisco. LEMO is a global leader in the design and manufacture of precision custom connection solutions since 1946. Providing high-quality push-pull connectors that can be found in a variety of challenging application environments including medical, industrial control, test and measurement, broadcast/audio/video, and telecommunications. LEMO also provides cable assembly services, prototyping and custom designs. LEMO requires an uncompromising commitment to QUALITY, EXCELLENCE, and INNOVATION. As such, we encourage and invest in each employee to promote responsibility, personal growth, and integrity. LEMO is an Equal Opportunity Employer

A&R Engineering has multiple openings for 2nd Shift Mechanical Assemblers for Aerospace and Defense components. - candidate must be capable of reading and understanding written and verbal instructions in English - candidate must be either as U.S. Citizen or permanent resident - candidate must have completed High School or GED as a minimum - Good manual dexterity is a must - Capable of lifting 15- 20 pounds - Training is available - Experience utilizing mechanical and pneumatic presses for riveting and staking is a plus - Experience utilizing automated identification equipment is a plus - Experience using basic measuring tools is a plus (i.e. - calipers, micrometers, vision systems) Principals only. Recruiters, please don't contact this job poster.

Looking for welder cleaner to add to our growing manufacturing team, experience require •Following and enforcing strict safety regulations such as wearing gloves , protective glasses, steel toe shows is a must for your on safety. •Cleaning stainless and aluminum fabricated items. •Inspecting all work for defects, dimension, alignment, preparation, and reporting discrepancies •Ensuring quality of finished products •Operating and maintaining shop hand tools and equipment, including tape measures, chisels grinders, files, demurring machines, notching machines, and press brakes. •processing incoming materials ordered. Benefits offered after 90 days

Starting Rate $18.22 - higher rate with more experience. This Assembler Position uses basic hand tools to assemble various components in manufacturing. We will provide on-the-job training to the right candidate. ControlAir is an established company with 35 years in the business. We have very low employee turnover, which is a testament to our exceptional culture and a clean, climate-controlled work environment. Candidates must be US citizens, 18 years and older. Candidates must be fluent in reading, writing, and speaking English.

Mandrel Tube Bender Van Nuys, CA Full time - Temp to hire 4x10s: Monday Thru Thursday - 6am to 4:30pm $25hr to start Designer and manufacture of Aircraft Ground Support Equipment, fabricated in-house from start to finish, with savvy and attention to detail producing some of the industry’s most innovative products is seeking a Mandrel Tube Bender to join their team in Van Nuys. Summary: Seeking a skilled Mandrel Tube Bender to join our growing team in Van Nuys. This role is critical to our fabrication process, ensuring that all tubing components meet our exacting standards for quality and performance. The ideal candidate will have hands-on experience operating mandrel tube bending equipment and a strong eye for detail. Responsibilities: • Operate mandrel tube bending machines to produce high-quality tubing components. • Read and interpret blueprints, technical drawings, and work orders. • Inspect finished parts for accuracy, quality, and compliance with specifications. • Maintain equipment, perform basic troubleshooting, and report any issues. • Work closely with the fabrication team to ensure smooth production flow. • Uphold a clean, organized, and safe work environment. Qualifications: • Previous experience operating mandrel tube bending machines (preferred). • Ability to read and interpret technical drawings and measurements. • Strong attention to detail and commitment to quality workmanship. • Ability to work independently and as part of a team. • Familiarity with aircraft ground support equipment manufacturing is a plus.

We’re Beefy’s Own — makers of the most renowned beef tallow–fried potato chips in the U.S.! We’re a family-owned, fast-growing start-up, and we’re looking for reliable, hard-working team members to help us handcraft our one-of-a-kind potato chips in our Derry production facility. What You’ll Do: - Kettle fry and hand-season potato chips to perfection - Prep potatoes using our semi-automated machinery - Bag and seal chips using our semi-automated machinery - Keep our workspace clean, safe, and organized - Work closely with a tight-knit crew to hit daily production goals What We’re Looking For: - Dependable, positive team players (no experience required — we’ll train you!) - Ability to lift 40+ lbs and stand for extended periods - Willingness to learn and grow with a start-up that’s scaling fast Schedule: - Full-time, 40 hrs/week, Mon–Fri - Two shifts available: 7am–3pm or 12pm–8pm Perks & Benefits: - Paid lunch break + free drinks and snacks - Opportunity for overtime - Be part of a mission-driven start-up making premium, old-school chips the right way To Apply: - Respond to this post with your name, phone number, and your availability for a call. Come be a part of something special!