Browse
···
Log in / Register

Draft & render person for architecture & design firm - Revit & Lumion (SOMA / south beach)

$65,000-90,000/year

1331 11th St, San Francisco, CA 94103, USA

Favourites
Share

Description

CANDIDACY PROCESS Please note there is only one way to submit your candidacy. Kindly fill the short form under: http://apply.draft.eagstudio.com Please note that note other channels or contact methods will be considered. ABOUT EAG EAG Studio is a well-established SF studio with 20+ some members. We specialize in orchestrating full-remodel plans for our clients, including permitting, architecture, interior design, landscaping, construction administration and interiors. Our projects size vary from single family home remodels to multi-family dwellings, including some retail space design, hospitality. mid-rise buildings, and full apartment remodels. EAG Studio oversees over 150 projects at various levels of development. We seek to deliver superior customer service to our clients and to enhance collaboration with builders and other project stakeholders. We put a strong emphasis in value-engineering every aspect of the design to afford a superior end-result. Please visit the websites below to learn more about EAG and see the kind of work we do. http://www.eagstudio.com HOUZZ http://www.houzz.com/projects/users/eagstudio FACEBOOK https://www.facebook.com/EAGstudio/ INSTAGRAM https://www.instagram.com/eagstudiosf/ THE POSITION We are looking for a technically savvy Revit draftsperson who also has an interest in helping the firm pursue its permits at SF DBI and other surrounding jurisdictions, as well as preparing developing interior and exterior renderings using Lumion. Our firm experienced members can instruct a motivated individual in how to perform those activities. We are mainly looking for someone who enjoys taking Revit plans to an extreme level of detail and graphical standards, and also going to the building departments to advance permits through the various stations. The ideal candidate is extremely detail oriented, who enjoys drafting, rendering realistic spaces and design, as much as navigating the planning and DBI processes in order to advance our clients' interest effectively. Candidates must have excellent design, communication, interpersonal and graphic skills. Our team consists of talented, resourceful, positive, tenacious and self-guided individuals, and we look for much of the same in this position. The work would include collaborating closely with the firm principal, architects and interior designers on graphical and drafting standards and design developments. It would also include interfacing with the design team who tend to take the models to a micro level of details mostly on the inside. All of our work is in Revit. The full-service approach and the highly integrated departments tend to set us apart from other firms out there. We also collaborate closely with the builders and see the projects through all the way to the end. The hours for this full-time position are somewhat flexible as long as they are consistent. We are mainly looking for someone with the same inherent client focus approach as we do, someone who demonstrates a strong interest in design as well as project management, and someone who possesses solid communication and computer skills. OUR TEAM Our company seeks to deliver superior customer service to our clients and to enhance collaboration with builders and other project stakeholders. We put a strong emphasis in value-engineering every aspect of the design to afford a superior end-result. We really pay great attention to keeping the remodel a pleasant experience for everyone involved and find solutions to every problem. This is an in office position. Our firm studio is on Folsom Street in South of Market and as part of the job requires visiting job sites and coordinating with coworkers, we are not accepting applications who desire to work remotely. We are close to the freeways and public transportation. We like to think we offer a pleasant and flexible working environment with a strong emphasis on honesty, flexibility, responsibility and initiative. We encourage professional growth and we make a point to facilitate advancement and reward loyalty. It's a great opportunity to learn the many sides of our business for one who is interested. The studio has plenty of natural light, top of the line computers and height-adjustable desks, a nice kitchen and lounge, as well as a roof deck. We pay every other week and the salary for this position will vary based on skills. Our wages are very competitive within the industry. We periodically revise salaries based on performance. The position is open so we could potentially start immediately. 75% of our work is located in San Francisco. This is a full-time position. We are mainly looking for someone with the same inherent client focus approach as we do, someone who demonstrates a strong interest in design as well as project management, and someone who possesses solid communication and computer skills. BENEFITS After the probation periods, benefits such as those will be offered: - Contribution towards EAG’s health care plans should you wish to join it - Telecom expenses contribution (like your mobile phone) - Paid vacation/personal/holiday/sick days - Commuter contribution - 401k plan contributions - Profit-sharing plans (whenever applicable) - Continuing education contributions (whenever applicable) - and several more... REQUIREMENTS This role takes place at our studio, unless specific jobs take us on the road with the principal designers or when we’re required to visit local projects and such. As stated before, we are not open to telecommuting except on very rare occasions. You need to possess extensive knowledge of Revit and Lumion and Google Workplace ecosystem, strong typing skills, good familiarity with some graphic tools. We will look out for an individual with strong communication skills, who understand construction costs and can design within budget. Pragmatism and a natural inclination for achieving a careful balance between originality and feasibility is required, as well as a desire to navigate the entitlement process with tact and strategy. We hope to find someone who is pleasant to work with and enjoys collaborating in a team both in person and with cloud computing tools. Pragmatism and a natural inclination for achieving a careful balance between originality and feasibility is required, as well as a desire to navigate the entitlement process with tact and strategy. We hope to find someone who is pleasant to work with and enjoys collaborating in a team both in person and with cloud computing tools. We are looking for someone who is detail oriented, who enjoys drafting, rendering realistic spaces and design, as much as navigating the planning and DBI processes in order to advance our clients' interest effectively. Candidates must have excellent design, communication, interpersonal and graphic skills. Our team consists of talented, resourceful, positive, tenacious and self-guided individuals, and we look for much of the same in this position. APPLICATION PROCESS If you believe that you meet the requirements listed above, please point your browser to this link to submit an application. http://apply.draft.eagstudio.com Please do not send your resume by email. We will ask for your resume/portfolio further down the road should your candidacy be considered. Only complete job applications coming through this form will be considered. We kindly ask that you do not call nor email unless we contact you first. Be assured that every single application is carefully reviewed and should your application be considered, we will reach out to you within 2 weeks or thereabouts and perhaps less. Thank you for your time! Thank you for your interest!

Source:  craigslist View original post

Location
1331 11th St, San Francisco, CA 94103, USA
Show map

craigslist

You may also like

Craigslist
Hiring - Millwork CNC Operator & Programmer (252 Lake Avenue, Yonkers, NY)
About the Job Job Title: CNC Operator & Programmer (Millwork) Location: Yonkers, New York Company: Make x Affect (Millwork Division of Affect Group) Type: Full-Time | In-person Hours: 40Hrs- M-F (with occasional overtime) Overview Make x Affect integrates skilled artistry with construction excellence, providing high-end, bespoke millwork and custom interior solutions. As the in-house millwork division of Affect Group, a NYC-based full-service general contractor and construction management firm operating in New York and the Tristate area, we support their fully integrated project delivery offering, enhancing project timelines, optimizing costs, and ensuring greater precision across projects. Our team is dedicated to transforming construction through positive spatial change. With a diverse portfolio spanning Corporate Interiors, Hospitality, Retail, Higher Education & Ground-up Residential projects, we pride ourselves on delivering excellence across every build. We are seeking a skilled and detail-oriented CNC Operator & Programmer with experience in architectural millwork and custom fabrication to join our Make x Affect team at our Fabrication Facility located in Yonkers, NY. This role is responsible for programming, setting up, and operating CNC machinery to produce high-quality millwork components for commercial, retail, and hospitality projects. Key Responsibilities: Program, set up, and operate CNC routers for architectural millwork production in accordance with established procedures and guidelines. Read and interpret shop drawings, CAD files, and work orders to ensure precision and accuracy in output. Create, adjust, and optimize CNC software such as SAI EnRoute, AutoCAD, AlphaCAM, or Microvelum to maximize efficiency and minimize material waste. Perform machine setups including tool changes, calibration, and fixture adjustments. Detect issues in the creation process and find solutions to ensure the machinery creates components in line with design specifications. Conduct quality checks on finished components to ensure compliance with design specifications and tolerances. Maintain and troubleshoot CNC machinery to ensure continuous, safe operation. Keep detailed records of operations, including production and quality logs to maintain operational efficiency and compliance with safety standards. Collaborate with project managers, engineers, and shop personnel to resolve technical issues and improve workflow. Uphold safety standards and maintain a clean, organized work area. Assist in other workshop tasks as needed. Qualifications & Skills: Required: 3+ years of CNC operating/programming experience in a millwork or woodworking environment. Strong understanding of woodworking techniques, joinery, and architectural millwork standards. Ability to read and interpret detailed shop drawings, blueprints, and CAD/CAM files. Strong proficiency in CNC programming software (e.g., AlphaCAM, EnRoute, Microvellum, or similar). Keen attention to detail and strong problem-solving skills. Ability to manage time effectively, meet deadlines, and prioritize multiple tasks. Commitment to shop safety standards and proper practices. Reliability, punctuality, and a strong work ethic. Ability to work independently and as part of a team. Strong numerical skills for precise measurements and calculations. Preferred but not essential: Prior experience with Biesse CNC machinery. Certification or Technical Degree in CNC Machining, Manufacturing Technology, Engineering or related field. Familiarity with ERP/shop management systems (e.g., Innergy, Microvellum, or similar). Knowledge of tooling, cutting strategies, and machine optimization in a production millwork setting. Familiarity with AWI (Architectural Woodwork Institute) standards, local building codes, and ADA compliance regulations. Benefits: You will be eligible to participate in all applicable employee benefit plans and programs of the Company, including health, dental, and vision insurance, 401(k) (No Employer Contribution), and other offerings, subject to the terms and eligibility requirements of those plans. Plans are subject to change at the Company’s discretion To Apply: Send your resume and a short message to careers@affect-group.com with the subject line ‘Application – CNC Operator [Your Name]’ or apply via Indeed. Equal Opportunity Statement Affect Build is an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, disability, veteran status, or any other legally protected status under local, state, or federal law. Job Type: Full-time Pay: $35.00 - $45.00 per hour Expected hours: 40 per week Benefits: Paid time off Ability to Commute: Yonkers, NY 10701 (Required) Work Location: In person
306 Lake Ave, Staten Island, NY 10303, USA
$35-45/hour
Workable
Safety Specialist - part time
We currently seeking a Safety Specialist within our Building Engineering division for various construction and civil projects throughout New York State. Our LaBella safety team provides safety management services and training to clients for all industries and markets. This position would report to our Latham, NY safety manager. This safety position is highly dynamic and requires long term travel assignments. The successful candidate will have the ability to work with our client's management team, safety staff and labor to assure on-site safety compliance. The position will be located on one of our client's project sites and have the ability to guide, lead and provide corrective actions, as needed. This will be a part time role. Duties Review and comply with safety programs and procedures Provide Toolbox Talks Develop weekly/monthly corrective actions report On-site training when needed Requirements 10+ years of construction, environmental, civil safety experience. OSHA (30hr) Construction Hazwoper (40hr/8hr) CPR/AED/FA Trained Must be willing to travel (overnights) and be assigned to long term (2-6 months) projects. Ability to provide safety training not required; however, much preferable. Salary Range: $40 per hour The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. Flexible Work Schedule Health/Dental Insurance 401k Plan with Employer Match Short & Long Term Disability Profit Sharing Paid Time Off Leadership Development Program Fitness Reimbursement Tuition Reimbursement Referral Bonus Program Wellness Program Team Building Events Community Service Events
Rochester, NY, USA
$40/hour
Craigslist
Project Engineer Assistant (Azusa)
ASIC FUNCTION The basic functions of a Project Engineer Assistant are to help Team leaders assigned to run the job to: plan, and document changes on the job so that each project or job executed as estimated to produce the desired results contained in the estimate. In essence, the Team Leader and the Project Engineer work in very close communication during the job. This is a Full-Time position: Monday – Friday 8am-5pm DUTIES AND RESPONSIBILITIES Be available to manage and complete any job, as and when assigned. Continually review all materials and labor costs that must be used in completing jobs and purchase materials according to the bid. Adhere to all established construction and engineering standards and procedures to protect the interests of the Company and seek out opportunities to improve methods, processes, procedures, and suppliers to best benefit the company. As and when requested, train new employees. Submit work or activity reports according to Company policy. As and when requested review plans, estimated material, supplies, and labor cost. Maintain good, business-like relations with other trades, suppliers, and clients. Ensure that all records relating to and flowing through the estimating function, are filed properly and easily accessible only by authorized personnel. Protect confidential company estimating data, programs, and information, restricting access only to company employees duly authorized by the president. Perform all other tasks assigned by Project engineer or Office Manager Prep Initial Job set up See ABC list / 3 Page Pre-con Prep and track RFI’s Prep and track Submittals Prep and track Change orders Prep and track T&M’s Prep and track Memos Prep and track transmittal Prep weekly Schedules Track incoming and outgoing Plans Contact team leader every day at end of day to close any open item and review Create a Mini day work schedule showing all task and group accordingly and schedule action require in groups Additional task as assigned by Project Engineer Manager.
748M+64 Falling Springs, CA, USA
$20-25/hour
Workable
Mechanical Engineer
We are currently hiring a Mechanical Engineer in our Building Engineering Division at our Syracuse, NY office. The Building Engineering Division at LaBella provides complete building engineering services including mechanical, electrical, plumbing, and structural engineering. Services range from feasibility studies and analysis through project design and construction. Our engineers are well versed in new construction, renovations, additions, analysis, special structures, and design/build projects for a variety of clients. The Mechanical Engineer will work with engineers as part of a project team to provide HVAC, plumbing, and fire protection designs, studies and technical support as required to fulfill project requirements. Typical projects will involve field work, design, and construction administration services. A successful candidate will be able to work well in a team to develop concepts, strategies, designs, drawings, specifications and reports for Building and Renovation projects. Duties System selection and calculations for design purposes Conduct field work to document existing conditions Work with Jr Engineers to develop drawings with building modeling software Work independently and as part of a team to complete project designs Construction phase services such as submittal review and site visits to monitor project progress Requirements 4 – 6 years of experience working at an A/E consulting firm is preferred Bachelor’s degree in Mechanical Engineering is preferred Well rounded experience in HVAC, plumbing, and fire protection Experience with Revit or AutoCAD is preferred Field experience is preferred New York State Professional Engineer’s license is a plus Ability to work well with a team and good analytical skills Salary range: $70,000.00 - $90,000.00 per year Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. Flexible Work Schedule Health/Dental Insurance 401k Plan with Employer Match Short & Long Term Disability Profit Sharing Paid Time Off Leadership Development Program Fitness Reimbursement Tuition Reimbursement Referral Bonus Program Wellness Program Team Building Events Community Service Events
Syracuse, NY, USA
$70,000-90,000/year
Craigslist
Project Architect (Financial District)
SUPERSTRUCTURES Engineers + Architects At SUPERSTRUCTURES, we don’t fill positions—we build careers. We’re seeking Project Architects with 3+ years of experience and an interest in the art and science of building restoration. About SUPERSTRUCTURES We are a prolific, award-winning E/A firm dedicated to the preservation and renewal of NYC’s buildings and infrastructure. We work on significant and challenging projects, including courthouses, schools, universities, churches, housing, and hospitals, and many of New York's most storied landmarks for the region’s premier public, corporate, and residential clients. Our focus is the building "skin and skeleton", embracing all components of the building envelope and underlying structure—facades, roofs, windows, and plazas—and the full complement of materials, from historic terra-cotta to high-performance curtain walls. We consistently produce construction documents that have been called the “Gold Standard” by our clients. We’re innovators, continually leveraging the latest tools and technology to drive restoration practice into the 21st century. Required Education and Experience A degree in architecture, and 3+ years of relevant experience. Qualifications Talent, dedication, and passion for building restoration is a must, and we’ll help you build on that foundation. Send us samples of your work (construction drawings) which illustrate current skills. About the Position and Responsibilities You’ll work within a “studio” that offers the dual advantages of a small office environment coupled with access to the centralized resources of a larger firm. You'll be supported by some of the most sophisticated technology in the profession, including proprietary computer systems and software, reality capture, and image processing, artificial intelligence, digital asset management, non-destructive diagnostic equipment and techniques. You'll conduct building investigations, produce reports, and prepare construction documents And be present in the field while your designs are implemented. What We Offer Paid holidays and paid time off Medical / Dental / Vision insurance 401k with automatic employer contribution Transit: monthly unlimited Metro Cards Prestige Be a part of an acknowledged leader the field, working on significant projects for NYC’s most prominent clients. Career Development Mentoring by experts (your colleagues). Continuing education and support for professional registration. Work-Life Balance Our 40-hour work week is supplemented by compensation for any additional hours occasionally (but rarely) needed to meet a project deadline. We are “office centric” but offer a hybrid option that balances the benefits of remote work with those of working in an office (and ours is in an inspiring, landmarked building in the heart of Lower Manhattan). Additional Perks Complimentary "Lunch and Learn" seminars to supplement and expand on current skills. Fresh Bagels on Thursday mornings / Starbucks and Peets coffee (always). Location, Location, Location Our Wall Street home is in the landmarked former Bankers Trust Company Building (Trowbridge & Livingston, 1912). The bright, spacious office on the 25th floor has high ceilings and views of lower Manhattan in four directions. We’re easily accessible via public transportation: the 1, 2, 3, 4, 5, A, C, R, W, J, Z, lines all stop within a few blocks of our building. NYC Ferry access at Pier 11 is at the foot of Wall Street and the PATH World Trade Center station is nearby. If your passion, experience, and skill set align with our areas of practice, this is truly one of the best places you can work. If you’re excited about this opportunity, please send us your resume, a cover letter with salary requirements, and a few pages of attachments (maximum of 10MB, please) or link to your portfolio that demonstrates your experience and capabilities. Want to know more? Visit our careers page at http://www.superstructures.com/careers/
67 Wall St, New York, NY 10005, USA
$85,000-135,000/year
Workable
Electrical Design Engineer
Location: ON-SITE (NOT REMOTE) RMF Engineering is an innovative, top-ranked, national engineering firm that specializes in providing design and engineering services for all aspects of building and utility infrastructure construction. RMF offers a balanced benefits package that centers on a stable and professional working environment which includes above standard health and dental insurance, paid holidays, paid vacation, and 401K plan. Description: RMF Engineering, a National Engineering firm, is currently seeking an Electrical Design Engineer with proven experience designing electrical systems in the education, public safety, hospitality and/or healthcare market sectors using software such as AutoCAD and Revit. The Electrical Design Engineer will work as part of the Buildings Electrical Design team in all facets of commercial building engineering.  The Electrical Designer is responsible for: - Power distribution, including riser diagrams and panel schedules. - Low voltage infrastructure design for IT and security systems. - Lighting design, including fixture selection and controls; and lighting calculations. - Low-voltage systems including fire alarm, security and controls. - Calculate loads, fault current, and voltage drop. - Performing field surveys and construction phase support. (Salary Range: $70,000 - $90,000 annually. RMF considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions.) Requirements Required Qualifications: BS Electrical Engineering degree from an accredited college or university 0-4 years electrical building systems design experience.   Experience with AutoCAD, Revit, and Microsoft Office software. Preferred Qualifications: EIT (FE) or PE Certification. Experience in power distribution and low-voltage systems. Knowledge of National Electrical Code (NEC) and standard industry design practices. Strong teamwork, communications, and client relationship skills. Ability to work in a dynamic, team-oriented environment. Strong work ethic and solid organizational skills.  Benefits A stable and professional working environment is offered with competitive salary, excellent employee benefits, which include health and dental insurance, paid holidays, paid vacation, and 401K plan.  We are an equal opportunity employer and take pride in the diversity and dedication of our staff.
Baltimore, MD, USA
$70,000-90,000/year
Cookie
Cookie Settings
Our Apps
Download
Download on the
APP Store
Download
Get it on
Google Play
© 2025 Servanan International Pte. Ltd.