Auto / Diesel Mechanic / Technician (Bellingham)

Hammer & Hand is seeking experienced full-time Frame-to-Finish Carpenters, as well as Site Leads (lead carpenter and site supervisor), to join our Seattle team! Frame-to-Finish Carpenter Carpenter Qualifications • Approximately 5 years of custom carpentry experience including framing, envelope, and trim install • Experience with remodel and new build projects • Knowledgeable of materials, methods, and the tools involved in the construction of buildings and other structures • Must be able to keep accurate records and perform timekeeping, including electronic submittals • Must have reliable transportation, a valid driver’s license, and a clean driving record • Must have full selection of tools to perform the work • High level of accuracy and pride in your craft • Ability to lift 50lbs Site Lead Hammer & Hand is seeking a site lead to join its Seattle team. Successful candidates are goal-driven, organized, outside-the-box problem solvers with a keen attention to detail and the ability to manage a team and at least 10 years of experience. Site Lead Qualifications • Approximately 10 years of construction and carpentry experience • Approximately 5 years in an on-site project management role • Experience with high-end residential remodels and new build projects • Experience managing high-end commercial TI projects • Must have reliable transportation, a valid driver’s license, and a clean driving record • Must have full selection of tools to perform the work • High level of accuracy and pride in your craft • Ability to lift 50lbs • Self-motivated and able to motivate others • Well developed computer skills, including cloud based project management tools. Preferred Qualifications & Skills • Experience with cutting-edge building practices and high performance building. • Ability to use project management software. APPLY HERE: https://hammerandhand.com/careers/ No phone calls, please. Thank you for your interest! To apply, please submit an application through the link above, and we’ll be sure to reach out to you if we decide to move forward. -- About Hammer & Hand Established in 1995, Hammer & Hand is a general contractor celebrating 30 years in partnership with clients and architects in the Pacific Northwest. Our reputation is built on decades of dedication from individuals who are as passionate about their jobs as they are about their lives outside of work. Based in Portland and Seattle, our firm serves clients by empowering employees, harnessing 21st century building science, and advancing the tradition of craftsmanship. From classic remodels to design-forward commercial build-outs and high performance passive buildings, Hammer & Hand’s projects are crafted with care and built to last. We work hard to foster an atmosphere that supports our most valuable asset: our people. As such, we are proud to announce that we are on the path to 100% employee ownership. We offer a dynamic workplace, as well as a full range of benefits, including: • Competitive Industry Wages • 100% Employer Paid Medical and Dental Benefits • Optional Vision Plan • Alternative Health Care reimbursement program for chiropractic, massage, and acupuncture • 401k Retirement Savings Plan • Employee Stock Ownership Plan • Paid Time Off and Paid Holidays • Long-Term Disability Insurance • Profit Sharing • Employee Assistance Program We are always looking for the best talent to join our team and are aware that a great candidate for a job may come from a less traditional background. Studies have shown that women, LGBTQIA+ individuals, and people of color are less likely to apply for a job when they believe they may not meet all of the qualifications in a job description. We strongly encourage you to apply even if you’re not sure you meet every one of our qualifications. If you are unsure, you can contact us through our website with questions about how this would be determined. We do occasionally have openings for those looking to hone their craft and build their skillset. These are paid positions. Please do not hesitate to apply if you feel you have the aptitude to succeed with us! See more about our employment philosophy here: http://hammerandhand.com/about/employment/ Hammer & Hand is committed to equal opportunity in employment and does not discriminate based on race, color, creed, religion, sex, age, national origin, mental/physical disability, sexual orientation, gender identity/transgender status, military/veteran status, genetic information, or any other status/characteristic protected under applicable law.

Job Title: Journeyman 06 Electrician (Low Voltage) Aerotek on behalf of its clients are looking for Low voltage 06 electricians for a couple contract projects one being in Kirkland and the other In Silverdale WA. Interview Required Pay: 44 plus an hour depending on experience Must have either 06 Electrical Card or have there 01 Electrical Card to be considered for this role Job Description As a Journeyman 06 Electrician (Low Voltage), you will be responsible for roughing in cable on two different job sites. This role requires a strong understanding of electrical systems and the ability to work efficiently in a construction environment. Responsibilities Rough in cable on two different job sites. Perform conduit bending and wiring tasks. Troubleshoot and resolve electrical issues. Utilize hand tools effectively in an industrial setting. Ensure the proper installation of electrical components. Essential Skills Proficiency in conduit bending. Experience with troubleshooting electrical systems. Competence in wiring and cable management. Familiarity with construction and industrial environments. Skilled in the use of hand tools for electrical work. Additional Skills & Qualifications Reliability and punctuality. Ability to follow directions and seek guidance when necessary. Why Work Here? Join a dynamic and supportive team where your skills and expertise are valued. Enjoy opportunities for professional growth and development in a collaborative work environment. Benefit from a culture that encourages continuous learning and advancement. Work Environment Work in an industrial and construction environment, utilizing a range of hand tools and equipment. The position requires you to work across two different job sites, where safety and teamwork are prioritized. Dress appropriately for a construction setting. Job Type & Location This is a Contract position based out of Kirkland or Silverdale Pay and Benefits The pay range for this position is $40.00 - $50.00/hr.

Join our Team! We are looking for a Residential 02 Journeymen. We specialize in custom remodels - no new builds here. Full time: Monday thru Friday Compensation: $45 - $55 per hour, DOE Benefits: Medical, life, vision and dental insurance Discretionary bonuses Safe Harbor 401k PTO 7 Paid Holidays Company vehicle and fuel card CEU’s reimbursed and more! Must Have: Reliable Transportation Valid WA State Driver’s License with good driving record Own hand tools Ability to pass pre-employment background check and safety sensitive position pre-employment testing When replying please include a resume or a little bit about your experience.

"Help Wanted" Is your current employer not keeping you busy? We work year round, 5 Days a week, Well when we are not on our paid vacation time and paid holidays... We have new equipment that is Well maintained to get the job done right and with utilizing mechanical labor as much as possible. No headache of "is this going to break today?" We also offer Very competitive pay rates, retirement plan, paid time off and holidays... Give us a call, you won't be sorry. Daniel Folk, Owner. CLIMBER: Minimum 1 years experience. Must be trained in the art of crown reductions (not topping); thinning, pruning, have rigging skills for all facets of tree trimming and removal. Must possess company mindset. Please e-mail resumes directly to this ad. Give us a call today! Call Dan at 253-677-0592

Are you a skilled and reliable technician looking for a flexible and rewarding opportunity? Join us as an independent contractor for our high volume roadside assistance company. This opportunity is available in Manhattan, Brooklyn and Staten Island. HIGHEST VOLUMES AND COMMISSIONS PAID IN THE INDUSTRY FOR OVERNIGHT 11:00 TO 7:00 AVAILABILITIES!! CONTACT US TO LEARN AND EARN MORE $$$$$!! Requirements: Applicants MUST BE experienced and current in roadside assistance services (e.g., tire changes, jump starts, lockouts, fuel deliveries, battery deliveries and installation) MUST HAVE android phone. (no iphones) Own a reliable vehicle and possess essential tools (jump box, jumper cables, floor jack (2.5 ton or greater), all essential sockets and breaker bar/impact gun, car door unlocking kit, gas can, tire inflator. If you do not have the tools we can point you in the direction to get them. Excellent problem-solving skills and customer service orientation Valid driver's license, own vehicle and insurance. Benefits: Let us know your on call availability - work when it suits you. Technicians on average earn $1000-1200 per week. How It Works: Receive service requests through our app Accept jobs based on your availability Provide efficient and friendly roadside assistance apply here: https://docs.google.com/forms/d/1SW3_WVGYeM6xuTxrm_ENTX6K1rzEdhtbKiKGgzKSbgE/edit

Auto mechanic needed Hours - M_F 8am - 6 pm Reference required. Please do not reply without references, references will be called. Must be able to do engine and transmission replacements as well as general auto repair. Must be legal to work in US. Must speak English. Must have driver's license. Must have own tools. Paid holidays and vacation after 1 year of work, bonus as well. 5 years experience needed.