Electricians 01 (Puget Sound area)

Need 2-3 electricians to work on conveyor system Pipe and low voltage wiring as well as power gen. This is a two week assignment which could turn into much more work

JAS Design-Build, Inc. is seeking an experienced Cabinet Maker. We are a family-owned one hundred+ person residential design-build firm that has been in the business for over thirty years specializing in high quality custom remodels and new homes. We have our own fully equipped cabinet shop where we make custom cabinetry for our clients. Responsibilities: This role will work under the direction of shop staff – cabinet makers and Shop Lead. Primary duties include all basic elements of cabinet making plus fit and assemble face frames, fit doors and drawer fronts, install specialty runners and pin hinges, install cabinets on-site, build solid wood tops, corbels and brackets, build basic furniture. This role also oversees cabinet maker 3s for quality, can be the point person on small cabinet projects, and may create parts and cut lists and execute through completion. General field carpentry is also possible. Ability to train others is preferred. We seek: A candidate that has had 5 years of cabinet making under their belt. The candidate must be able to respond to a timeline or schedule, is self-motivated and takes initiative. Is a quick learner when it comes to cabinet shop methods and quality standards, using shop tools and equipment safely, and reading a plan set. The candidate must be a good problem solver and can work well with others. You should want to work in a highly collaborative, schedule driven environment that values work culture and high-quality results. The candidate must be able to lift and move up to 75lbs. Candidate would be required to bring the following hand-tools with them: tape measure, cordless drill/driver, adjustable square, countersink drill bit and driver bits. Also, a shop bib or apron and appropriate footwear. We offer: This is a full-time position with competitive wage, a fantastic community-oriented and positive work environment as well as a consistently reliable amount of steady work. After a 60 day probationary period, you will be eligible for our excellent health/dental/Rx/vision plan, long-term disability, EAP, paid holidays, PTO, and access to our 401k plan. Paid time off begins accruing from first day of work and can be used immediately, we also offer a tool purchasing program. We pay hourly and respect the forty-hour week – all hours over forty results in overtime pay (1.5x hourly rate). Wage will be commensurate with experience. Are you ready to be part of a company that cares as much about the quality of the finished product as efficiency and productivity? This is a great place to work with quality employees, many who have been with us for over fifteen years. If you fit the qualifications above, please apply and depending on the response to the ad we will likely reply further only to those individuals with whom we would like to try and schedule an interview. EEO Statement: JAS Design Build is an EEO employer and all qualified candidates will receive consideration without regard to race, color, religion, national origin, citizenship, genetic information, age (except for bona fide occupational qualifications), sex, pregnancy (including childbirth or a related medical condition), disability, sexual orientation, gender identity, gender expression, marital status, military leave or service, status as a disabled veteran or other covered veteran status, participation in EEO-protected activity, any other status protected by federal, state, or local law, or association with a person on the basis of one or more of the foregoing.

Hammer & Hand is seeking experienced full-time Frame-to-Finish Carpenters, as well as Site Leads (lead carpenter and site supervisor), to join our Seattle team! Frame-to-Finish Carpenter Carpenter Qualifications • Approximately 5 years of custom carpentry experience including framing, envelope, and trim install • Experience with remodel and new build projects • Knowledgeable of materials, methods, and the tools involved in the construction of buildings and other structures • Must be able to keep accurate records and perform timekeeping, including electronic submittals • Must have reliable transportation, a valid driver’s license, and a clean driving record • Must have full selection of tools to perform the work • High level of accuracy and pride in your craft • Ability to lift 50lbs Site Lead Hammer & Hand is seeking a site lead to join its Seattle team. Successful candidates are goal-driven, organized, outside-the-box problem solvers with a keen attention to detail and the ability to manage a team and at least 10 years of experience. Site Lead Qualifications • Approximately 10 years of construction and carpentry experience • Approximately 5 years in an on-site project management role • Experience with high-end residential remodels and new build projects • Experience managing high-end commercial TI projects • Must have reliable transportation, a valid driver’s license, and a clean driving record • Must have full selection of tools to perform the work • High level of accuracy and pride in your craft • Ability to lift 50lbs • Self-motivated and able to motivate others • Well developed computer skills, including cloud based project management tools. Preferred Qualifications & Skills • Experience with cutting-edge building practices and high performance building. • Ability to use project management software. APPLY HERE: https://hammerandhand.com/careers/ No phone calls, please. Thank you for your interest! To apply, please submit an application through the link above, and we’ll be sure to reach out to you if we decide to move forward. -- About Hammer & Hand Established in 1995, Hammer & Hand is a general contractor celebrating 30 years in partnership with clients and architects in the Pacific Northwest. Our reputation is built on decades of dedication from individuals who are as passionate about their jobs as they are about their lives outside of work. Based in Portland and Seattle, our firm serves clients by empowering employees, harnessing 21st century building science, and advancing the tradition of craftsmanship. From classic remodels to design-forward commercial build-outs and high performance passive buildings, Hammer & Hand’s projects are crafted with care and built to last. We work hard to foster an atmosphere that supports our most valuable asset: our people. As such, we are proud to announce that we are on the path to 100% employee ownership. We offer a dynamic workplace, as well as a full range of benefits, including: • Competitive Industry Wages • 100% Employer Paid Medical and Dental Benefits • Optional Vision Plan • Alternative Health Care reimbursement program for chiropractic, massage, and acupuncture • 401k Retirement Savings Plan • Employee Stock Ownership Plan • Paid Time Off and Paid Holidays • Long-Term Disability Insurance • Profit Sharing • Employee Assistance Program We are always looking for the best talent to join our team and are aware that a great candidate for a job may come from a less traditional background. Studies have shown that women, LGBTQIA+ individuals, and people of color are less likely to apply for a job when they believe they may not meet all of the qualifications in a job description. We strongly encourage you to apply even if you’re not sure you meet every one of our qualifications. If you are unsure, you can contact us through our website with questions about how this would be determined. We do occasionally have openings for those looking to hone their craft and build their skillset. These are paid positions. Please do not hesitate to apply if you feel you have the aptitude to succeed with us! See more about our employment philosophy here: http://hammerandhand.com/about/employment/ Hammer & Hand is committed to equal opportunity in employment and does not discriminate based on race, color, creed, religion, sex, age, national origin, mental/physical disability, sexual orientation, gender identity/transgender status, military/veteran status, genetic information, or any other status/characteristic protected under applicable law.

Auto mechanic needed Hours - M_F 8am - 6 pm Reference required. Please do not reply without references, references will be called. Must be able to do engine and transmission replacements as well as general auto repair. Must be legal to work in US. Must speak English. Must have driver's license. Must have own tools. Paid holidays and vacation after 1 year of work, bonus as well. 5 years experience needed.

Canepa is looking for an experienced Automotive Detailer/Polisher to join our team! About Canepa Canepa is an industry leader in the collector car world, including sales, restoration, and motorsports. We specialize in premium luxury and performance vehicles including, but not limited to: Porsche, BMW, Ferrari, Lamborghini, Mercedes, McLaren, and Shelby. Our technical experts have a combined experience of more than 200 years in the automotive and mechanical engineering industries. Located in Scotts Valley, California, Canepa is central to the Silicon Valley and WeatherTech Raceway Laguna Seca. Qualifications: • Must have a minimum of 2 years working in the automotive detailing industry. • Must have extensive knowledge in all interior and exterior detailing techniques. • Must have experience with detailing products and materials. • Must be fully qualified in buffing and polishing painted surfaces. • Must be fluent in English and must have average English reading and writing comprehension and skills. • Must be punctual, dependable, and be willing to work overtime with short notice. Benefits: • Medical, Dental, Vision Insurance • Paid Vacation • 401K Job Title: Journeyman Detailer/Polisher Job Type: Full-time Compensation: $20.00 - $25.00/hour BOE This is a non-exempt, hourly position located in Scotts Valley, CA Please submit your Resume via Craigslist reply or email it to: Careers at Canepa dot com - - No Phone Calls or Walk-ins. - -

Licensed Elevator Mechanic – Part-Time / Per Diem Make a Real Impact Helping Others Move Safely at Home BathPlus is looking for a licensed elevator mechanic to assist with the installation and maintenance of residential stair lifts and vertical platform lifts across Western Washington. This role offers flexible hours and deeply rewarding work as you help people regain independence and peace of mind in their own homes. What You’ll Do: • Professionally install and service home accessibility equipment • Ensure all systems meet safety and regulatory standards • Communicate clearly and compassionately with clients • Collaborate with a team dedicated to quality and care What You Bring: • Valid elevator mechanic license (required) • Prior experience with residential stair lifts or platform lifts preferred, training is available if none • Strong attention to safety and detail • Reliable, professional, and customer-focused • Availability for part-time or per diem work BathPlus provides adaptive equipment, expert installation, and custom bath solutions for aging in place. Serving Western Washington, our experienced team helps clients modify their homes to live safely and independently. In partnership with Bellevue Healthcare, we offer trusted guidance and access to the right products for every project. We serve with integrity, honesty, and reliability—promising solutions that are both economical and sustainable for the long term. Pay Range: $45–$75/hour, DOE Why Join Us: • Flexible, lifestyle-friendly scheduling (50-100 hours per month) • Heartfelt work with immediate impact • Mission-driven team with deep community roots Ready to help people move safely—in their homes and in their lives? Apply today! https://hrkinections.catchthebest.com/apply/v5vqm69k/79x2zqz9