CDL OTR Drivers needed - DryVan OTR - Join our Team today!

*1-2 years experience working on heavy duty diesel equipment. *Must have valid license- own tools *Welding experience strongly preferred * Perform routine services and ensure DOT compliance * Must be professional, dependable, hardworking, self- motivated, and have the ability to work unsupervised and able to work well with your team. Benefits include: Health insurance, Family health coverage, 401K with company match, paid holidays, PTO, and seniority bonus. Call 303-534-6376 for more information!

At CrossCountry Freight Solutions, we take great satisfaction in creating an atmosphere that allows our drivers to flourish and progress in their careers. We are seeking safety conscious, Class A Linehaul Drivers. This position requires transferring freight to specified locations in a timely manner, hook and unhook commercial trailers, and complete all paperwork required by government regulations and company procedures/policies. Our Linehaul Drivers are home daily with weekends off, allowing them to enjoy a healthy work-life balance. If you are ready to take your driving career to the next level, hitch on and prosper with CCFS! Shift/Route: Monday - Friday Nights: start times range from 9pm-Midnight/based on route Pay: Hourly: $35 per hour. Singles rate: $0.75 per mile. Doubles rate: $0.77 per mile. Flat rate - $176 one-way. Varies by route Routes: Denver, CO - New Castle, CO - Denver, CO (Flat rate - $1,760 weekly) Denver, CO - Villa Grove, CO - Denver, CO (Flat rate - $1,660 weekly) Denver, CO - Wamsutter, WY - Denver, CO (532 miles - milage pay) Denver, CO - Salida, CO - Denver, CO (284 miles - hourly pay) Denver, CO - Grand Junction, CO - Denver, CO (488 miles - milage pay) ESSENTIAL JOB DUTIES Conduct pre-trip and post-trip vehicle inspections Hook up and haul trailers between our customer/terminal locations as instructed by dispatch or immediate supervisor Ensure all shipping documentation is available for DOT inspection and that appropriate paperwork accompanies the shipment to the delivery point Operate tractor-trailer combination for extended periods of time, over long distances MINIMUM REQUIREMENTS Valid Class A CDL At least 21 years of age 1 year of commercial driving experience No DUI’s or DWI’s (in the past 3 years) No more than 3 traffic violations (in past 3 years) Must have Hazmat and Tanker endorsements or be willing to obtain - renewals reimbursable? PHYSICAL DEMANDS Must be able to frequently enter and exit the cab of a commercial vehicle. Must be able to carry freight weighing up to 40 pounds for a distance of up to 20 feet.? Must be able to hook and unhook various commercial vehicle combinations, to manually lower and raise landing gear, to operate fifth wheel release levers, to lock and release pintle-hooks, to attach and release safety chains, to open and close cargo doors, to climb into and out of vehicles, and to fuel and check oil/coolant levels of vehicles. BENEFITS Local, Home Daily Dedicated Routes + Consistent Miles/Hours Worked Medical, Dental, Vision, and Life Insurance PTO, Paid Holidays, Volunteer Time Off, Wellness Time Off 401k Retirement Plan Biweekly Pay CrossCountry Freight Solutions (CCFS) is an exceptional company with a mission to achieve universal prosperity with our Customers, Company, Team Members, & Communities. We use the latest technology to provide quality service and on-time delivery to our customers. CCFS provides direct service throughout the Upper Midwest, and Western regions, along with parts of the Southwest region. We look forward to having you Hitch on and Prosper with us! #CCDR Application Link: https://recruiting2.ultipro.com/CRO1008CROS/JobBoard/c9b2daf3-f57b-43be-8f6c-f3c2a15f1809/OpportunityDetail?opportunityId=3b8b5048-79d5-444a-a649-767ef7aeda8c

Structural Steel and Rail welder. Must be able to read blueprints and pass 1G MIG welding certification. 2 Years minimum in shop welding experience. Benefits include paid vacations, holidays, uniforms, profit sharing, 401K and family health insurance. Hours are 7:00 a.m.- 3:30 p.m. M-F with some Saturdays required. Reliable transportation is required since there are no close bus routes. We are located in the northwest Arvada area. We are a well established company with 40 years in business. St. Thomas Steel Inc. 19010 West Highway 72 Arvada, 80007

Assembly Technician - Aerospace Location: Denver, CO 80215 (Lakewood) Pay: $24 per hour Schedule: 1st Shift Job Description: We are seeking a dependable, detail-oriented Assembly Technician with experience in the aerospace manufacturing industry. In this role, you will be responsible for preparing final parts by cleaning, inspecting, and treating machined components using a variety of tools and techniques. Key Responsibilities: Including but not limited to: *Read, interpret and follow basic blueprints, diagrams, engineering drawings, specifications, bills of materials, and other written instructions or procedures to accurately assemble equipment and products *Grind, sand, clean, or polish objects or parts to correct defects or to prepare surfaces for further finishing, using hand tools and power tools *Rework and/or repair assembled equipment and products according to engineering specification changes *Verify quality of finished workpieces by inspecting them, comparing them to templates, measuring their dimensions, or testing them in working machinery *File grooved, contoured, and irregular surfaces of metal objects, such as metalworking dies and machine parts, to conform to templates, other parts, layouts, or blueprint specifications *Apply solutions and chemicals to equipment, objects, or parts, using hand tools *Operate manual mill and/or lathe Qualifications: *Soldering experience; Certification of IPC-610(preferred) and J-STD-001, or willing to obtain upon hire *Eligible or already have security clearance (highly desirable) *Able to read blueprints, diagrams, engineering drawings, specifications, bills of materials, and other written instructions. *Ability to use hand tools including deburring blades, scraper handles, Dremel’s, rotary brushes, sanders and grinders. *Good hand dexterity and coordination is necessary as products and components are typically very small. *Strong attention to detail with the ability to follow step-by-step instructions *Ability to perform repetitive tasks while standing, bending, and lifting (up to 50 lbs.) *Able to carry out tasks that require steady, precise arm movement for taping/masking parts For more information, please call Ms. Alana Ortiz at (720) 419-2303. Thank you in advance for your interest. At NCW, we do our best to provide the brightest talent to the best companies across the country. Founded in 2000, our company’s purpose was to redefine the way people think about contract staffing. People come first in our business. Our services are refined with in-depth expertise in our industry verticals, construction, manufacturing, warehousing & distribution, and engineering. We care about finding solutions that benefit everyone involved: our clients, our candidates, and our workforce. NCW is an Equal Opportunity Employer. Diversity and inclusion are important components of our culture and hiring practices. NCW is an employer and business partner dedicated to elevating the quality of life of our employees, clients, and communities.

Vestas Hiring Assembly Technicians at Two Colorado Locations Assembly Technicians—Available Locations Nacelles Factory - Brighton, CO The Nacelles Factory in Brighton proudly manufactures nacelles and hubs for wind turbines in 265,000 square feet of building space. All shifts available ($3 shift differential for night shift) Assemble components utilizing both hand and power tools Operate a bridge crane for loading, stacking, and transportation 1+ years of previous manufacturing experience is required Required previous experience with standard power and hand tools, including a torque wrench Mechanical Aptitude (pneumatic, hydraulic and electrical experience) is required Ability to read and follow written instructions in English High school diploma or GED or equivalent is required Pay: $23.50 - $30/hr (depending on experience) Blades Factory - Windsor, CO The Blades Factory in Windsor produces blades for the new V163-4.5 MW turbine as well as the 2 MW platform in our 666,000 square feet of building space. Engage in manual production processing to fit and assemble components, such as bolts, screws, shafts, or bearings into a complete assembly Load, stack and transport materials by hand, truck, crane or jib 2+ years’ experience of either manufacturing, trade labor, craning, or fabrication experience is required Ability to read and follow written instructions in English High school diploma or general education degree (GED) required Basic system skills-Microsoft office, SAP and Apriso preferred Must pass confined spaces test as required Pay: $23.50 - $28/hr (depending on experience and skill set) Click Here: Apply & Express Interest What Vestas Offers You Healthcare, vision, and dental insurance Retirement plan  Tuition reimbursement  Flexible time off  Paid parental leave  State-of-the-art training programs Click Here: Apply & Express Interest Why Vestas Vestas is the energy industry’s global partner on sustainable energy solutions. We specialize in designing, manufacturing, installing, and servicing wind turbines, both onshore and offshore. Across the globe, we have installed more wind power than our competitors in the renewable energy arena with more than 145 GW of wind power installed worldwide and 40+ years of experience in wind energy, Vestas has an unmatched history demonstrating our expertise within the field. With 29,000 employees globally, Vestas is a diverse team united by a common goal: to power the solution – today, tomorrow, and far into the future.

Pilatus is looking for detail-oriented individuals to join our new state-of-the-art Aircraft Paint Shop. In this role, you will work under limited supervision to prepare and paint aircraft exteriors and components such as fuselages, wings, fairings, horizontals, verticals, and flight controls in accordance with special specifications and all technical data. You will also process the assigned workload through the shop while meeting quality and schedule expectations. Additionally, you will mask, sand, prime, paint, and complete paint inspections on the PC-12 PRO Single Engine Turboprop, and the PC-24 Super Versatile Jet. You will be a key part of our team that values a perfect final aircraft delivery that brings our customers' dreams to life. Take your career to the next level with Pilatus Business Aircraft! Go to this link to apply: https://recruiting.paylocity.com/recruiting/jobs/Details/3619834/PILATUS-BUSINESS-AIRCRAFT-LTD/Aircraft-Paint-Technician Pilatus is hiring for the following shifts: Monday - Friday, 3:30pm - 12:30am Monday - Friday, 11:30pm - 8:30am Essential Duties/Responsibilities Performs customer-facing, finish-grade painting in accordance with applicable specifications by fabricating patterns, stencils, templates, and operating spray equipment to apply finish coats Prepares aircraft surfaces by sanding, masking, and priming surfaces for final layout and painting Performs incoming inspection of aircraft and materials upon arrival from Stans Recognizes and troubleshoots problems as they arise, alerting others regarding potential concerns and ensures that all materials are available to support painting activities Maintains accurate records and documents and complete sign-offs in a timely manner Ensures all work is performed according to applicable regulatory requirements, customer specifications, and established quality standards and procedures and notifies appropriate personnel of any deviations Follows safety policies and uses required personal protective equipment in accordance with company and government regulations and guidelines Other Duties/Responsibilities Works with and accepts guidance from Leads and higher skilled technicians, while helping to build skills and abilities of lower level technicians Develops and implements skills and techniques required to perform all assigned tasks in accordance with Pilatus quality standards Performs other related duties and assists coworkers and other departments to successfully perform other job tasks as assigned by Lead or Director Skills/Qualifications High school diploma or general education degree (GED) required Two (2) years related trade school or vocational degree preferred Demonstrated craftsman-level abilities and quality, and a minimum of two (2) years related experience or equivalent combination of education and experience Has a thorough understanding of all pertinent paint shop processes, paint systems, and quality standards Ability to use measuring tools and perform basic math computations Ability to use paint sanders, spray guns, primer guns, sealant guns, and buffers Ability to read, understand, and adhere to engineering drawings, tech specs, and other relevant documents Eye for precision and attention to details Able to work in heights, restricted spaces, and lift up to 40 pounds Regular, reliable attendance and willingness to work overtime and other shifts as required Basic computer skills including Microsoft Office, including Outlook, Word, and Excel Must be able to read, write, speak, and understand English What We Offer: 11 paid holidays a year, plus 15 days of paid vacation time, and 6 days of paid sick/personal time to start with an increase to 20 days of paid vacation time after 5 years with Pilatus 90% of medical, dental, and vision premiums paid for single coverage and 80% for family coverage, averaging $9,600 annually Monthly health savings account (HSA) contributions totaling $2,250 for single coverage and $3,000 for family coverage annually 401(k) retirement plan matching up to 6% Life and long-term disability insurance premiums paid in full Tuition assistance available annually after the first year The salary range for this position is $24.53 - 34.53 per hour depending on experience. A shift differential of $2.00 is applied to both swing and night shifts. Salary to be determined by the education, experience, knowledge, skills, and abilities of the applicant, internal equity, and alignment with market data. Go to this link to apply: https://recruiting.paylocity.com/recruiting/jobs/Details/3619834/PILATUS-BUSINESS-AIRCRAFT-LTD/Aircraft-Paint-Technician