Browse
···
Log in / Register

Lead Diesel Tech in Buffalo, NY | Up to $40/hr + $3k Bonus (Buffalo)

$40/hour

112 Lackawanna Ave, Depew, NY 14043, USA

Favourites
Share

Description

Bulkmatic is seeking a full-time Lead Diesel Technician/ Shop Supervisor for our Buffalo, NY location. We are offering relocation assistance to a qualified candidate. Since the 1970's, Bulkmatic has been one of the largest and most trusted dry bulk transport/ trucking companies in the country. Bulkmatic has terminal locations across the United States including an in-house maintenance network made up of 22 shop locations. As a privately owned company, we realize that to provide the best possible value to our customers, we need to be one of the best places to work. We know that our success starts with a team of outstanding employees. The Lead Diesel Technician/ Shop Supervisor will be responsible for performing all maintenance aspects and management of a Bulkmatic shop. This position reports directly to the Terminal Manager and follows the required maintenance guidelines set forth by the Vice President of Maintenance and the Department of Transportation. Apply here PRIMARY DUTIES: • Manage the day to day activity of the shop Including inventory, supervision of employees (when applicable) and workload assignments. • Assist Terminal Manager Assistance with terminal invoices and other required paperwork Completion of the master sanitation check list Consistent implementation of policy and procedures Compliance with government regulations, customer expectations and company standards. • Oversee employee safety, satisfaction and performance Ensure compliance with safety related requirements Promote Clean and Safe working conditions • Complete required data elements Generate and analyze shop data and reports to promote efficiency Work with other terminals and departments to ensure necessary documents are processed • Perform diesel repairs and maintenance, complete shop projects and assignments as required or requested by management. • Ability to work independently • Some travel required To secure parts as needed, meet with vendors, assess equipment and acquire bids as needed. PAY: Up to $40 per Hour based on experience We are now offering a $3,000 Sign-on Bonus at this location! POSITION REQUIREMENTS: • Valid Driver's License (CDL preferred) • At least 4 years of management or supervisory experience preferred • Five years relevant experience in the operation and repair of tractor (class 8), and trailers (air brakes) inspection / repairs within a fleet, state, or federal (including Armed Forces) shop environment. • A two year degree with a leading technical college in the repair of diesel engines is preferred • Must provide your own set of tools. BENEFITS: We offer a comprehensive benefits package to all full time employees including paid vacation and holidays, Medical, Dental and Vision insurance, 401k with employer match, and life insurance among other benefits. If you have questions about the position, please give us a call at 800-956-0014 Click here to be contacted by a recruiter with more information.

Source:  craigslist View original post

Location
112 Lackawanna Ave, Depew, NY 14043, USA
Show map

craigslist

You may also like

Craigslist
QC Tech Civil Construction Field (Hartford)
Helical Drilling, a New England based design build Geotechnical Engineering firm is looking to fill a Quality Control Technician’s role. This role would ensure that the project’s specifications are followed and that Helical Drilling’s work has been installed according to the design. They will work with the Helical Drilling (HDI) field supervisor, HDI office, the general contractor, and the project geotechnical engineer. The individual is responsible for recording accurate field and production information on a daily basis along with recognizing unknown anomalies that can affect the original design parameters. When changes or anomalies do occur, they also need to collaborate with the above mention entities on solutions and/or repairs. A successful QC Tech will ensure a project has been built correctly. Responsibilities and Duties: • Read, understand, and follow the design submittal and specifications as it relates to construction of the project. • Document and transfer to field layout plans as-builts, test pier locations, offsets, newly discovered utilities, etc. • Read and understand the boring logs. • Inform field supervisor of on-site change of conditions. • Review design submittal to verify information is accurate. • Complete accurate and timely Daily Field Reports (DFRs). • Prepare plans for field production and use. • Document and report all anomalies. • Participate in project kick off and closeout calls. • Communicate with the HDI office, GC, and/or Geotechnical engineers as directed by field supervisor. • Keep track of production and assist in sequencing of installing elements. • Introduce and be engaged with the on-site geotechnical consultants. • Calculate volume of materials needed (concrete, cement, grout, sand mix, infield mix, etc.) • Setup and preform load tests. Understand the required criteria for execution and completion of a successful test. • Record and complete all logs (drilling, driving, sheeting, grouting, test piers, installation, etc.) • Review the Quality Control Summary sheet and As- Built information at the end of a project for accuracy before submitting to the office. • Enter and record accurate information into the logs. REQUIREMENTS: • MUST HAVE: Reliable Vehicle and Valid Drivers License (We work all over New England) • 1-5 years of experience as a QC or laborer with QC experience in a fast paced construction company-Preferred • OSHA 10 Preferred • Ability to lift 50-100 lbs. • Must be able to work assigned hours with crew with some overnights • High School Diploma or GED equivalent required *Must be able to speak, read and write English and be a US Citizen ESSENTIAL KNOWLEDGE AND SKILLS * Attention to detail * Responsible attitude * Understanding of basic geometric formulas * Ability to read, interpret, and scale plans * Ability to use a tape measure for field layout * Ability to use elevation control devices * Well organized * Confident * Takes care to complete tasks fully and well * Labor as needed * Versatile BENIFITS * 100% Company Paid Health and Dental Care (Single or Family) * 3 Weeks PTO (Paid Time Off) * 9 Paid Holidays * OT After 8 Hours * Rarely Work Weekends * Paid Travel Time and Mileage * Per Diem for Overnight Travel * Paid Hotel Stays (Single Rooms) * 401 K Contribution * Continued Training and Certifications * ESOP, Employee Stock Ownership Plan Equal Opportunity Employer
208 Asylum St, Hartford, CT 06103, USA
$23/hour
Craigslist
Welders Needed - MIG and/or TIG positions or Fabrication experience (Indianapolis, IN)
Our Indianapolis Shop has an immediate need for both an experienced MIG Welder and a Tig Welder. Fabrication experience is a plus but much of the work is pretty simple. The MIG welding pay will be based on experience and skills. We can negotiate based on where you land ($25 - $29). TIG Welder starting pay can go up to $32 per hour if you have all your own tools and equipment. We generally start out $28-$29 based on skillset. We will pay more to start if you can pass our pipe weld test. Anyone coming out of school with certs is welcome to apply. Don't overthink requirements because we have entry level positions however: Ideal TIG candidates can: - Read and interpret blueprints drawings and specifications to determine the layout and assembly of pipes - Measure and mark pipes for cutting threading and welding - Assemble and secure pipe fittings and related equipment according to specifications - Inspect completed welds to ensure they meet quality standards - Test pipes for leaks using pressure gauges or other testing equipment - Repair or replace damaged pipes or fittings as needed If you are talented and just do not have tools/equipment we can discuss your situation but pay would be reduced. We do phone screens to brainstorm if you might be a potential fit. If you send an email be sure to include your phone number. We won't email back and forth. We prefer to call and save both of us time. Call Ryan direct at (317) 226-3287
2854 N Denny St, Indianapolis, IN 46218, USA
$25-32/hour
Cookie
Cookie Settings
Our Apps
Download
Download on the
APP Store
Download
Get it on
Google Play
© 2025 Servanan International Pte. Ltd.