MFG-Sandblast, Mat Hander, Tube Roller, Radial Arm Drill Op, Assembly (Tulsa Metro)

Hiring for the following positions as soon as possible. Located in the West and South Tulsa Areas. Please send resume by responding to this ad, and/or please come in to interview M-Th 9:00am-4:30pm, walk ins welcome. ✔Sandblaster- Experience sand blasting on metals, to prepare for painting. Ideal candidate would have recent experience in this field. Pre-Paint/Sandblaster-Prepare metal parts for sandblasting $18.00-$20.00 Depending on experience, M-Th 7:00am-5:30pm with Friday OT ✔Material Handler-Previous experience working in a mfg warehouse, position will require using computers, inventory, driving forklift with oversized items inside and outside. M-Th 7:00am-5:30pm with Friday OT $18.00-$20.00 ✔Tube Roller-Experience running a machine that rolls sheets of metal to create tubes for heat exchangers. Load sheet metal into the machine and unload finished product. Required to use overhead cranes when needed. Will be lifting up to 50lbs or move, bend stand and stoop down as required. $20.00-$23.00+ Depending on experience. ✔Shop Helper- Previous fabrication shop and/or assembly experience setting up heat exhangers. Assemble heat exchangers per prints, use overhead crane,tape measure, assemble fans, connect frame using all types of hand tools.These positions do require ability to bend, stand and stoop over the course of the day. Ability to lift up to 50lbs as needed. Pay: $17.00 hourly Radial Arm Drill Operator -Previous experience running a radial arm drill, Will be required to set up and operate radial arm drill such as boring, reaming, and tapping placing holes into metal parts for heat exchangers. $20.00-$23.00 to start Hours: M-F 6:00am-2:30pm, Overtime as required! Resumes can be send by responding to this ad. Please come in to interview for these positions at Oklahoma Staffing Specialists 5649 S. Mingo Rd. Ste A M-Th 9:30am-4:00pm.