ok.com
Browse
Log in / Register

India CAFE-III Fuel-Efficiency Rules: What Changed

OKer_wjpt8el
09/30/2026, 05:52:33 AM
CAFE-III

India has formally notified the third phase of its Corporate Average Fuel Economy regime, CAFE-III, setting stricter fuel-efficiency and CO2 targets for new passenger vehicles sold in the country from April 1, 2027. The rules will stay in force through March 31, 2032, and will apply to all M1-category passenger vehicles manufactured or imported into India.

The notification, issued under the Central Motor Vehicle Rules, 1989, gives automakers a defined but tight runway to adjust model plans. As of April 9, 2026, companies with India operations are facing less than one year before the new compliance framework begins.

The framework, laid down by India's Ministry of Power, changes how automakers are measured. In addition to annual fuel-consumption targets, it introduces credit trading, super credits for cleaner vehicles, carbon-neutrality benefits for certain fuels, and credits for selected fuel-saving technologies.

Tightening fuel-efficiency targets

Under CAFE-III, each manufacturer's annual average actual fuel consumption will be measured in petrol-equivalent liters per 100 km, using the Modified Indian Driving Cycle (MIDC). The target for each financial year is calculated using the weighted average unladen mass of the manufacturer's fleet, a fixed constant of 1,229 kg, and sliding coefficients.

The coefficients fall every year, which means the standards get harder to meet over time:

  • FY 2027-28: a = 0.00158, c = 3.9960
  • FY 2028-29: a = 0.00152, c = 3.8600
  • FY 2029-30: a = 0.00148, c = 3.7585
  • FY 2030-31: a = 0.00139, c = 3.5313
  • FY 2031-32: a = 0.00131, c = 3.3273

From April 1, 2027, each manufacturer's annual average actual fuel consumption must be less than or equal to the standard prescribed for that financial year.

Two compliance blocks and a passbook system

The new rules split the 2027-2032 period into two compliance blocks. The first block runs for three financial years, from FY 2027-28 through FY 2029-30. The second block covers FY 2030-31 and FY 2031-32.

Each manufacturer will have a passbook in which credits and debits are recorded. When actual fuel consumption is better than the target, the difference becomes a credit. When actual fuel consumption is worse than the target, the shortfall is recorded as a debit.

Compliance is assessed annually, but penalties for any contravention will be determined at the end of the relevant compliance block, after credits and debits have been settled.

Credit trading with a short annual window

CAFE-III allows automakers to pool credits and trade them with other manufacturers on mutually agreed terms. A manufacturer with a debit balance can also buy credits from India's Bureau of Energy Efficiency (BEE) at fixed per-gram prices that increase each year.

  • FY 2027-28: Rs 2,500 per g CO₂/km
  • FY 2028-29: Rs 3,000 per g CO₂/km
  • FY 2029-30: Rs 3,500 per g CO₂/km
  • FY 2030-31: Rs 4,000 per g CO₂/km
  • FY 2031-32: Rs 4,500 per g CO₂/km

However, credit exchanges, buyouts, or a combination of both can only happen during a 30-day trading window from October 1 to October 31 in each assessment year. This narrow window could create strategic pressure on manufacturers to finalize compliance plans before the start of the fiscal year.

Super credits for electric and hybrid models

CAFE-III gives certain powertrains a "volume derogation factor," which effectively rewards cleaner vehicles with extra credit. The factors are:

  • Battery electric and range-extended electric vehicles: 3.0
  • Plug-in hybrid and strong hybrid vehicles using flex fuel ethanol: 2.5
  • Strong hybrid vehicles: 1.6
  • Flex fuel ethanol vehicles: 1.1

The Ministry of Power says this arrangement gives manufacturers more flexibility to adopt cleaner technologies, alternative fuels, and other innovative solutions. For automakers with existing EV or hybrid programs, the new structure can soften the impact of stricter annual targets.

Carbon-neutrality discounts for fuels

The CAFE-III norms introduce a Carbon Neutrality Factor (CNF) that lowers a manufacturer's declared tailpipe CO₂ for certain fuels.

  • Ethanol-blended petrol vehicles, including E20 and specified blends, plus strong-hybrid and plug-in-hybrid models, get an 8% discount.
  • Flex fuel ethanol vehicles get a 22.3% discount.
  • CNG vehicles get a discount of 5% or the CBG blending percentage notified by the Ministry of Petroleum and Natural Gas, whichever is higher.
  • Diesel vehicles get a discount based on the actual biofuel blending percentage specified by the Ministry of Petroleum and Natural Gas.

These discounts effectively reduce the fuel-consumption value used in the compliance calculation for vehicles running on those fuels.

Credits for efficiency-improving technologies

Automakers can also claim credits for installing specific fuel-saving technologies in their vehicles. Each eligible technology is worth 1.0 g CO₂/km, equivalent to 0.0422 liters per 100 km. The maximum claim across all eligible technologies is 9.0 g CO₂/km, equivalent to 0.3795 liters per 100 km.

The approved technologies include:

  • Start-stop systems
  • Tire pressure monitoring systems
  • Regenerative braking systems
  • Six-speed or higher transmissions
  • 12V/48V efficient alternators
  • 12V/48V motor-generators or micro-hybrid systems
  • Exterior LED lighting
  • Advanced glass or glazing with a Solar Heat Gain Constant of 58% or less
  • Electric water pumps
  • High-efficiency air-conditioning systems
  • Solar-reflective paint
  • PWM-controlled radiator fans

During the first compliance block, energy savings claims can be based on self-declaration. In the second block, claims must be supported by validated test results using methods specified by the Ministry of Road Transport and Highways. For high-efficiency air-conditioning and solar-reflective paint, self-declarations will be benchmarked after the first block.

Petrol-equivalent conversion factors

The CAFE-III framework sets fixed factors for converting tailpipe CO₂ measurements and energy consumption into petrol-equivalent fuel consumption values.

For fuel consumption directly measured from tailpipe CO₂, the factors are:

  • Petrol: 0.04217
  • Diesel: 0.03776
  • LPG: 0.06150
  • CNG: 0.03647

Electric vehicles are measured in kWh per 100 km. Diesel, LPG, CNG, and electricity consumption values are then converted into petrol equivalents using separate factors:

  • Diesel: 1.1168
  • LPG: 0.6857
  • CNG: 1.1563
  • Electricity: 0.1028

MIDC and WLTP reporting

For every vehicle model sold from April 1, 2027, manufacturers will have to declare performance under both the MIDC and the Worldwide Harmonised Light Vehicles Test Procedure (WLTP), as notified by the Ministry of Road Transport and Highways.

The conversion factor for translating CAFE-III targets from MIDC to WLTP will be notified separately by the Ministry of Power in consultation with the BEE. That factor will be based on data reported by manufacturers, adding another layer of testing and reporting requirements.

Reporting, enforcement, and small-volume exemption

Manufacturers will need to submit state-wise sales data every year, along with their final compliance report, to the designated agency. The agency will compile the data and submit it to the BEE by September 30 of each assessment year. The final passbook must then be submitted within one month after the trading window closes, meaning before November 30.

At the end of a compliance block, non-compliance in liters per 100 km is calculated by dividing the total debit in g CO₂/km by total sales during the block and then multiplying the result by 23.7135.

Small-volume manufacturers are given some relief. Any manufacturer with a manufactured or imported volume of fewer than 1,000 eligible vehicles in a reporting period is exempt from the specific emission target. However, those companies are still required to report their annual average actual fuel consumption to the BEE.

What CAFE-III means for global automakers

CAFE-III is not just an India-specific policy issue. Many global automakers and suppliers that sell or manufacture vehicles in India will need to build these targets into product-development cycles now. The structure rewards electrified powertrains but does not ban any technology. Instead, it uses credits and discounts to push the market toward cleaner fuels and more efficient components.

For automakers with limited EV or hybrid sales in India, the rising B

Cookie
Cookie Settings
Our Apps
Download
Download on the
APP Store
Download
Get it on
Google Play
© 2025 Servanan International Pte. Ltd.