···
Log in / Register

Will speeding by 12% result in penalty points?

1Answers
Roberto
07/24/2025, 05:43:12 PM

Speeding by 12% results in 3 penalty points. Speeding penalty point standards: Speeding within 10% of the prescribed speed limit will not be penalized for the time being; speeding between 10% and 20% of the prescribed speed limit will result in 3 penalty points; speeding between 20% and 30% of the prescribed speed limit will result in 6 penalty points; speeding between 50% and 70% of the prescribed speed limit will result in 12 penalty points and may also lead to the revocation of the driver's license; speeding below 50% on roads with a speed limit lower than 60 km/h will result in a warning. Speeding: Refers to the act of a driver operating a motor vehicle or non-motor vehicle on the road at a speed exceeding the prescribed speed limit for that section. Speeding is currently the most common traffic violation on domestic highways and is also the most likely to lead to serious accidents.

Was this review help?
112
Share
More Q&A

Which area does the license plate 'Liao F' belong to?

Liao F is the license plate number for Dandong, Liaoning. 'Liao' is the abbreviation for Liaoning Province, and 'F' is the code for Dandong City. Here is some additional information about Liaoning license plates: 1. The first two characters of a license plate consist of the province abbreviation and the city code. 2. Liao A – Shenyang; Liao B – Dalian; Liao C – Anshan; Liao D – Fushun; Liao E – Benxi; Liao F – Dandong; Liao G – Jinzhou; Liao H – Yingkou; Liao J – Fuxin; Liao K – Liaoyang; Liao L – Panjin; Liao M – Tieling; Liao N – Chaoyang; Liao P – Huludao; Liao V – Provincial Government.
103
Share

What is the reason for the RPM not dropping after releasing the accelerator?

When driving at high speeds with engine load, releasing the accelerator does not immediately cause the engine RPM to drop. Instead, the RPM decreases as the vehicle speed reduces. This occurs because although the engine's fuel intake is reduced, the high-speed inertia of the car continues to "drive" the engine rotation, making the RPM proportional to the real-time vehicle speed. Below is an introduction to engine RPM: 1. The level of engine RPM affects the number of work cycles per unit time or the effective power output of the engine, meaning the effective power varies with RPM. Therefore, when specifying the effective power of an engine, the corresponding RPM must also be indicated. 2. The effective power and corresponding RPM specified on the engine's product label are referred to as the rated power and rated RPM, respectively. The operating condition of the engine at rated power and RPM is called the rated condition. Rated power is not the maximum power the engine can produce; it is the maximum usable limit of effective power determined based on the engine's intended application.
111
Share

What Are the Hazards of Diesel Entering Engine Oil?

The hazards of diesel entering engine oil are as follows: 1. Diesel in the engine oil will reduce the viscosity of the oil, thereby affecting its lubrication performance and accelerating the wear of engine components. 2. After diesel enters, phenomena like cylinder scoring and bearing seizure may occur, directly impacting the vehicle's power. The reasons for diesel entering engine oil are as follows: 1. Damage to the injector pump plunger sleeve sealing ring. Once this seal is damaged, diesel will leak into the injector pump body and then flow into the oil pan along with the engine oil. 2. Excessive clearance between piston rings and cylinder walls. If the gap is too large, diesel in the cylinder can flow into the oil pan. 3. Low cylinder pressure. If the cylinder pressure is too low, the cylinder may not function properly or at all, causing injected diesel to flow into the oil pan. 4. Seal failure. If the PT pump main shaft seal fails, diesel can enter the timing gearbox and then reach the oil pan. 5. Injector malfunction. If the injector is oversized, it increases fuel injection, leading to incomplete combustion. Residual diesel can then enter the combustion chamber and seep into the oil pan.
112
Share

What are the differences between the imported and domestically produced Mercedes-Benz E300?

The domestically produced E300L comes in pre-configured versions such as the Fashion Edition, Luxury Edition, and Sport Edition, while the imported E300 allows for custom configurations, which gives it an advantage over the domestic version. In terms of wheelbase, the domestic version is slightly longer, hence the letter 'L' in its name. Specific details are as follows: 1. In terms of power, it is equipped with the 2.0T engine of the currently available models, paired with a 9-speed automatic transmission. The current models are divided into two versions with the 2.0T engine: a low-power version with a maximum power of 135kW (184PS) and a maximum torque of 300N·m, and a high-power version with a maximum power of 180kW (245PS) and a maximum torque of 370N·m. 2. The Mercedes-Benz E-Class (imported) currently has 12 models available or soon to be launched, featuring a single 2.0T engine displacement and one transmission option, the semi-automatic. The engine has a maximum power of 180.0kW, maximum horsepower of 245PS, and maximum torque of 370.0N·m. The body dimensions are 4925mm 1860mm 1470mm.
116
Share

What are the symptoms of a faulty car catalytic converter?

The symptoms of a damaged car catalytic converter are as follows: 1. There will be obvious red-hot spots between the exhaust manifold and the catalytic converter. 2. Abnormal noises can be heard when accelerating the vehicle. 3. A pungent, foul odor can be detected during idling or acceleration. 4. For a properly functioning catalytic converter, the temperature at the front is lower than at the rear. If the front temperature is higher than the rear, it indicates poor converter performance. Here is some additional information about catalytic converters: 1. The car catalytic converter is the most important external purification device installed in the vehicle's exhaust system. 2. The catalytic converter transforms harmful gases such as CO, HC, and NOx from car exhaust into harmless carbon dioxide, water, and nitrogen through oxidation and reduction reactions. 3. Since this converter can simultaneously convert the three main harmful substances in exhaust gases into harmless substances, it is called a 'three-way' catalytic converter.
119
Share

What causes engine shaking and the engine warning light to come on?

If the vehicle's engine warning light is on and the engine is shaking, it indicates that the air-fuel mixture in the engine is not at the ideal ratio. The simplest method is to use a specialized diagnostic tool to read the fault codes in the engine system and perform troubleshooting based on the stored fault information. Common causes of engine shaking include: 1. Spark plugs that have not been replaced for a long time, leading to excessive gap, carbon buildup, or internal damage. 2. A faulty ignition coil in one of the cylinders, causing that cylinder to malfunction. 3. Internal short circuit in the fuel pump, preventing the low-pressure fuel from reaching the required supply pressure, leading to engine shaking or stalling. 4. Air leaks in the engine intake system, causing engine shaking. 5. Excessive carbon buildup on the throttle valve, valves, or piston tops when the engine is cold. 6. Loss of compression in one of the engine cylinders due to poorly sealed valves or piston rings stuck with carbon deposits, resulting in engine shaking.
113
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.