···
Log in / Register

Will electronic eyes capture U-turns?

1 Answers
SanLevi
09/04/25 8:20am
If there are electronic cameras, illegal U-turns will be captured. According to the "Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China," violators will be penalized with a 3-point deduction and a fine of 200 yuan. The basis is Article 49, which states that motor vehicles are not allowed to make U-turns at locations with no-U-turn or no-left-turn signs or markings, as well as at railway crossings, pedestrian crossings, bridges, sharp curves, steep slopes, tunnels, or other dangerous sections of the road. Permissible U-turn situations: Intersections with U-turn signs: If there is a clear U-turn sign at an intersection, a U-turn can be made. If there is a U-turn signal light, the U-turn must be made according to the signal. If there is no signal light, the U-turn should be made without obstructing other vehicles or pedestrians. Intersections without explicit no-U-turn or no-left-turn signs: If there is no explicit prohibition of U-turns at a location, a U-turn can be made. Here, "no explicit prohibition" means that as long as there are no "no-U-turn signs," "no-left-turn signs," or solid center lines, a U-turn can be safely made. Yellow grid lines also allow U-turns: Yellow grid lines are no-parking zones marked at intersections prone to congestion due to temporary parking, important entrances and exits, and other necessary locations. Any vehicle stopping on these grid lines (including waiting for traffic lights) is considered a violation. Although parking is not allowed in yellow grid zones, U-turns are permitted as long as there are no central barriers. Intersections with U-turn signal lights: This is straightforward—if there is a U-turn signal light, follow it. Only proceed with a U-turn when the light is green. No-left-turn and U-turn-allowed signs appearing together: U-turns are allowed, but left turns are prohibited. However, "no U-turn" is not the same as "no left turn." Precautions when making U-turns at intersections: Observe road markings. If they are solid lines, U-turns are prohibited under any circumstances, and you should continue driving to find a suitable location. If there is a "no left turn" sign ahead, even if there is no mention of a U-turn prohibition, U-turns are not allowed at that intersection because U-turns and left turns are similar maneuvers—both require turning left first. U-turns must be made from the innermost left-turn lane. If you are in the second left-turn lane, a U-turn is not permitted at that intersection. Always yield to straight-moving vehicles before making a U-turn. If you interfere with their normal flow, you will bear full responsibility for any accidents. Near intersection stop lines, lanes often have guiding arrows for drivers to choose their direction. The leftmost lane is not always marked for left turns. If it has a straight arrow, U-turns are prohibited even if there are no explicit no-U-turn signs.
Was this review help?
16
4
Share
More Forum Discussions

How to reset the maintenance light on a Kia K5?

The steps to reset the maintenance light on a Kia K5: 1. First, turn the Kia K5's power to ON mode; 2. Then press the toggle button on the steering wheel to switch to user settings, where you can see the maintenance settings; 3. Finally, press the OK button to enter the maintenance settings, and hold down the OK button to reset the oil maintenance mileage and time, completing the process. The main function of the maintenance light is to record the usage mileage of some important components. When it lights up, it serves as a reminder to the owner that it's time for maintenance. You should go to the nearest authorized service center as soon as possible for maintenance. The maintenance personnel will use a diagnostic tool to reset the maintenance light, which is the second method to reset the maintenance light.
8
3
Share

Is FAW-Volkswagen Jetta SUV a Joint Venture Vehicle?

FAW-Volkswagen Jetta SUV is a joint venture vehicle. The Jetta VS7 under FAW-Volkswagen Jetta brand is a mid-size SUV with dimensions of 4624mm in length, 1841mm in width, and 1644mm in height, with a wheelbase of 2730mm. The VS7 is equipped with a 1.4-liter turbocharged engine across all variants. This engine delivers a maximum power of 110kW and a peak torque of 250Nm, with maximum power achieved at 5000-6000 rpm and peak torque available between 1750-3000 rpm. The engine features DVVT technology, direct fuel injection, and an aluminum alloy cylinder head and block. It is paired with either a 5-speed manual transmission or a 6-speed automatic transmission.
20
4
Share

What does the car battery dead icon look like?

The appearance of the car battery dead icon: The symbol is shaped like a battery, with a plus sign on one side and a minus sign on the other. Signs of a dead car battery: 1. If the car fails to start after one or two attempts, it indicates insufficient voltage; 2. If the battery has been used for over a year and the horn sounds weaker than before when starting the car, it means the battery is running low; 3. Check by turning on the headlights: if the light is bright white, the battery is normal; if the light is dim red, it indicates low power. Causes of a dead car battery: 1. The car has been parked for a long time; 2. The car battery has reached the end of its lifespan; 3. The generator is damaged; 4. Insufficient electrolyte or leakage; 5. The fuse is blown; 6. Corrosion of the car battery terminals.
8
5
Share

What is the Difference Between Sheet Metal and Painting?

Sheet metal and painting are two completely different types of work. Below is some knowledge about sheet metal and painting. Characteristics of Sheet Metal: Sheet metal is lightweight, high-strength, conductive, low-cost, and suitable for large-scale mass production. It is widely used in fields such as electronics, communications, automotive industry, and medical equipment. For example, sheet metal is an essential component in computer cases, mobile phones, and MP3 players. As the application of sheet metal becomes increasingly widespread, the design of sheet metal parts has become a crucial part of product development. Mechanical engineers must master the design techniques of sheet metal parts to ensure that the designed sheet metal meets both the functional and aesthetic requirements of the product while also making the stamping mold manufacturing simple and cost-effective. Characteristics of Painting: Painting operations are highly efficient, suitable for both manual work and industrial automated production. They have a wide range of applications, including hardware, plastics, furniture, military, and shipbuilding, making it one of the most common coating methods today. Painting operations require cleanroom environments ranging from class million to class hundred. Painting equipment includes spray guns, paint booths, paint supply rooms, curing ovens/drying ovens, workpiece conveying equipment, and mist and wastewater, as well as exhaust gas treatment equipment.
18
1
Share

How to Open the Engine Hood of the Territory?

Steps to open the engine hood of the Territory: 1. Open the car door and sit in the driver's seat; 2. Locate the engine switch lever on the left side of the driver's seat; 3. Pull the car engine lever by hand; 4. After hearing a 'click' sound, move to the front of the car; 5. Reach into the central position at the front of the engine compartment hood; 6. Feel for the auxiliary latch handle of the engine compartment hood; 7. Lift the latch upwards and hold it; 8. Lift the engine compartment hood upwards. Functions of the engine hood: 1. Airflow guidance: By guiding the airflow, air resistance can be decomposed into beneficial forces, increasing the force of the front tires on the ground, which is beneficial for the driving stability of the car; 2. Protection of the engine and surrounding pipeline accessories: By improving the strength and structure of the engine hood, it can fully prevent adverse effects such as impact, corrosion, rain, and static interference, ensuring the normal operation of the vehicle.
10
0
Share

How to Adjust the Time on a Volkswagen Dashboard?

Steps to adjust the time on a Volkswagen dashboard: 1. Press the one-touch start button located in the vehicle's central console to power on the dashboard; 2. Press the SET button on the left side of the steering wheel; 3. Use the up and down option toggle buttons on the right side of the steering wheel to adjust the vehicle time; 4. Press the OK button on the steering wheel to complete the process. If the dashboard screen becomes unlit, suddenly goes black, intermittently turns black and then lights up, or only displays partial content with incomplete information, you can try restarting the vehicle by turning it off and then on again, or by disconnecting and reconnecting the power.
14
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.