···
Log in / Register

Where is the VIN number of the Geely Binrui?

1 Answers
GriffinLynn
09/06/25 2:44am
Open the engine cover, then use a flashlight to locate the engine number on the engine body, or you can also find the engine number on the vehicle license. Definition of engine number: The Vehicle Identification Number (VIN) is like the car's ID card. It is determined according to national vehicle management standards and contains information such as the manufacturer, year, model, body type and code, engine code, and assembly location. The new vehicle license usually prints the VIN code in the "VIN number" column. Composition of the engine number characters: The VIN code consists of 17 characters, hence it is commonly referred to as the seventeen-digit code. Correctly interpreting the VIN code is crucial for accurately identifying the vehicle model and conducting proper diagnosis and maintenance.
Was this review help?
16
1
Share
More Forum Discussions

What brands does India's Tata Motors have?

India's Tata Group owns automotive brands such as Tata Motors, Mahindra, Ashok Leyland, Jaguar, and Land Rover. Jaguar and Land Rover are relatively well-known brands in China. Land Rover is a British automaker specializing in SUV models, while some models under Jaguar and Land Rover have already been locally produced in China. The E-Pace is a compact SUV under the Jaguar brand, equipped with two engine options: 1. A low-power version of the 2.0-liter turbocharged engine, delivering 200 horsepower and 320 Nm of maximum torque. This engine reaches its peak power at 5,500 rpm and achieves maximum torque between 1,200 and 4,500 rpm. It is paired with a 9-speed automatic transmission. 2. A high-power version of the 2.0-liter turbocharged engine, producing 249 horsepower and 365 Nm of maximum torque. This engine attains peak power at 5,500 rpm and maximum torque between 1,300 and 4,500 rpm. It is also mated to a 9-speed automatic transmission.
4
2
Share

Is the Toyota CHR fuel-consuming?

The new Toyota CHR is a relatively fuel-efficient car. The Ministry of Industry and Information Technology has provided the following fuel consumption data for the 2020 and 2018 Toyota CHR models: combined cycle fuel consumption is 5.7L/100km, suburban cycle fuel consumption is 5.0L/100km, and urban cycle fuel consumption is 6.8L/100km. Additional information: 1. Fuel consumption is related to road conditions, constant speed, and individual driving habits. It tends to be higher during the break-in period. In winter, lower temperatures result in poorer gasoline atomization and combustion efficiency, while in summer, using air conditioning increases engine resistance. Therefore, fuel consumption in winter and summer is indeed slightly higher than in spring and autumn. 2. How to reduce car fuel consumption: Properly manage the warm-up time or distance in the morning; maintain normal tire pressure or switch to larger tires; plan routes to avoid frequent lane changes on congested roads; avoid prolonged idling without turning off the engine or frequent ignition; refrain from aggressive acceleration and frequent braking while driving; use the specified grade of engine oil; avoid driving at low gear with high speed or high gear with low speed; and avoid fully opening windows in summer or using air conditioning during traffic jams.
14
4
Share

How often does a car need to be started?

If a car is parked for about a week, it should be started once. If parked for about half a month, the car should be started and driven for three to five kilometers. This not only charges the battery but also changes the stress points on the tires when parked, which has no negative impact on the car. If the car is left unused for a long time, it can cause damage to the battery. For long-term parking, the following situations should be noted: 1. The vehicle's paintwork. If the car is parked outdoors for a long time, exposure to wind, rain, bird droppings, and dust can corrode the paint and rubber components. If possible, it's best to park the car in a garage. If a garage is not available, using a car cover can effectively protect the paint. 2. The vehicle's tires. If the car is not used for a long time, the tire pressure should be inflated to the maximum value, typically 2.8-3.0 bar depending on the tire model, to prevent damage from underinflation over time. 3. The vehicle's battery. If the car is not used for a long time, the negative terminal of the battery can be disconnected to prolong the battery's self-discharge time. Alternatively, the battery can be charged once every 1-2 months to prevent damage from internal plate detachment.
6
2
Share

How many kilometers can the Emgrand New Energy vehicle run?

Emgrand New Energy's pure electric version has a standard range of approximately 400 kilometers, while the extended range version offers about 500 kilometers. The plug-in hybrid version can travel around 61 kilometers in pure electric mode. Below is an introduction to the Emgrand New Energy vehicle: 1. The plug-in hybrid version of the Emgrand New Energy is equipped with a 1.5-liter naturally aspirated engine, which has a maximum power of 76kW and a maximum torque of 140 Nm. The engine reaches its maximum power at 6000 rpm and its maximum torque at 4400 rpm. This engine features VVT technology and uses an aluminum alloy cylinder head and block. The combined power of the electric motors paired with this engine is 114kW, with a total torque of 339 Nm, making it a dual-motor vehicle. 2. The plug-in hybrid version of the Emgrand uses a MacPherson independent suspension at the front and a torsion beam non-independent suspension at the rear. The pure electric version is a single-motor vehicle, with the motor delivering a maximum power of 120kW and a maximum torque of 250 Nm. This vehicle uses a ternary lithium battery, which is common in most pure electric vehicles. Ternary lithium batteries are lighter and have a higher energy density, making them very suitable for pure electric household vehicles.
17
1
Share

What does independent suspension mean for the Sagitar?

The independent suspension of the Sagitar divides the axle into two sections, with each wheel independently mounted under the frame via a coil spring. When one wheel experiences a bump, the other wheel remains unaffected, allowing both wheels to move independently. This enhances the vehicle's stability and comfort. Additional information: 1. The advantages of independent suspension include: lighter weight, which reduces the impact on the vehicle body and improves wheel traction; the use of softer springs with lower stiffness to enhance ride comfort; the ability to lower the engine position and the vehicle's center of gravity, thereby improving driving stability; and the fact that left and right wheels can move independently, reducing body tilt and vibrations. However, independent suspension systems have drawbacks such as complex structure, higher cost, and inconvenient maintenance. Additionally, due to their complexity, they may occupy some interior space. 2. Daily driving precautions: Ensure the vehicle is not overloaded, especially avoiding prolonged extreme driving conditions like excessive bumping when fully loaded or sharp turns, as these can damage the suspension system. Routine checks can be performed by pressing on the body above the wheels and inspecting tire wear to assess suspension condition. If any suspension noise, abnormal tire wear, or deterioration in vehicle handling is detected, prompt repairs are necessary to prevent worsening faults or even causing traffic accidents.
18
0
Share

What to Do When the Haval H6 Battery is Dead and Jump-Starting Doesn't Work?

Haval H6 not starting due to a dead battery can be resolved using the following methods: 1. Push-starting: Push-starting is the most familiar and effective emergency starting method, but it should be used as a last resort and not frequently, as it can cause some damage to the engine and clutch, especially in automatic transmission vehicles. 2. Towing-starting: The method and principle of towing-starting are similar to push-starting, but towing is often more effortless and convenient. When implementing this method, use a tow rope of appropriate length and ensure both ends are securely tied. Before towing, the drivers of both vehicles should agree on communication signals, such as using the horn or hand gestures to indicate starting and stopping, to ensure coordinated action. Additional Information: 1. The car not starting could also be due to vehicle malfunctions, such as a damaged starter motor or clogged fuel injectors. Regular vehicle maintenance can reduce the likelihood of such issues and minimize occurrences of the car not starting. For example, driving at high speeds more often can reduce carbon buildup, ensuring the fuel tank is free from water and dirt when refueling, and using high-quality gasoline from reputable sources. 2. There can be many reasons why a car won't start. When this happens, it's important to thoroughly inspect the vehicle, promptly identify the cause, and take steps to avoid potential safety hazards.
19
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.