···
Log in / Register

Where is the defogging button for the windshield of the 2021 Buick Excelle?

1 Answers
McMartin
09/01/25 5:52am
The defogging button for the Excelle is located on the air conditioning control panel. Below are the specific details about the Buick Excelle: Vehicle Positioning: The Buick Excelle is a compact car under the Buick brand. Its dimensions are 4609mm in length, 1798mm in width, and 1464mm in height, with a wheelbase of 2640mm. Powertrain: The 1.3-liter turbocharged engine of the Buick Excelle delivers a maximum power of 120kW and a maximum torque of 230Nm. This engine reaches its peak power at 5500 rpm and its peak torque between 1800 and 4400 rpm. It is equipped with a 48V mild hybrid system and multi-point fuel injection technology, featuring an aluminum cylinder head and block. This engine is paired with a 6-speed automatic transmission. The 1.5-liter turbocharged engine produces 113 horsepower and a maximum torque of 141Nm, achieving its peak power at 6000 rpm and peak torque at 4400 rpm. This engine features DVVT technology and multi-point fuel injection, with an aluminum cylinder head and cast iron cylinder block. It is also paired with a 6-speed automatic transmission.
Was this review help?
7
3
Share
More Forum Discussions

What documents and materials are required for the registration of a used car?

Documents required for the transfer of a used car: 1. For the seller: the owner's ID card, vehicle registration certificate, vehicle license, original purchase invoice (or transfer invoice if the car was previously transferred). If the seller is an organization, the original business license and official seal are required. 2. For the buyer: ID card. For non-locals who need to register for a local license plate, a valid temporary residence permit is also required. (Some cities have switched to residence permits, which can be linked to the public security network!) If the buyer is an organization, the original business license and official seal are required. 3. Original vehicle purchase invoice or the last transfer invoice: required before 2012, but not needed in most cities after 2012. 4. Others: original vehicle license. Vehicle registration certificate (big green book). For out-of-town transfers, the purchase tax booklet is required (small red book before 2001, small green book after 2001).
11
3
Share

Can a car with replaced LED headlights pass the annual inspection?

As long as the replaced LED headlights meet national requirements, they can pass the annual inspection. The relevant requirements are as follows: 1. Light color and brightness: The replaced bulbs must not exceed 6500K, otherwise the annual inspection equipment cannot detect the light. The replaced bulbs must be properly adjusted in height and alignment, with a central focusing point. The equipment tests the brightness at the center point, so scattered light will not pass the inspection. 2. LED bulb installation issues: The bulb position and rear cover distance vary for each car. Current LED bulbs come with either fans or aluminum heat dissipation strips. Choose LED bulbs that can be properly installed in your car; otherwise, the rear cover may not fit tightly, leading to water and dust ingress, which can quickly damage the bulbs and even affect the car's wiring and assembly. 3. LED bulb brands: It is advisable to choose well-known brands because LED bulbs have high requirements for heat dissipation and lamp beads. Poor heat dissipation can cause rapid light attenuation and burn out the lamp core quickly. Choosing bulbs from reputable brands ensures quality and performance.
17
4
Share

Which country does the Leopaard brand belong to?

Leopaard is a brand under China's Changfeng Group, headquartered in Changsha, Hunan Province. Its main models include Feiteng, Leopaard CS10, Black King Kong, Leopaard CS9, Leopaard Q6, Leopaard CS6, Leopaard CS7, and Qilin. The Leopaard logo features an outer circle with an inner triangle that has a gap. The triangle is derived from a stylized leopard head, representing the company's name. Key milestones in Leopaard's development are as follows: In 1985, Factory 7319 built a production line with an annual capacity of 300,000 car inner tubes, marking the factory's transition to normal operations. In 1987, Factory 7319 successfully completed the trial production of the Leopaard CJY6420A light off-road command vehicle, which was modified and put into small-scale production in 1988. In January 1993, the factory partnered with Japan's Lihao Development Co., Ltd. and Hong Kong's Lifeng Co., Ltd. to establish the "Sino-Foreign Joint Venture Changfeng Automobile Manufacturing Co., Ltd." In October 1996, Factory 7319 was officially restructured into Changfeng (Group) Co., Ltd. with approval from the General Logistics Department. In June 2004, Changfeng Automobile, a core subsidiary of Changfeng Group, was listed on the Shanghai Stock Exchange. In 2006, Changfeng showcased multiple SUV concept cars, including the Leopaard CS6-Y and CS7, at the Beijing Auto Show. On November 11, 2007, Changfeng's urban SUV, the Leopaard CS6, was officially launched. In 2014, Leopaard unveiled a concept car named CS10 at the Beijing Auto Show. In April 2020, Changfeng Leopaard's Changsha factory was placed under the trusteeship of Geely Holding Group.
8
5
Share

What is the Electric Vehicle Charging Pile Project?

Electric Vehicle Charging Pile Project. The following is a detailed introduction: 1. Charging Pile Content: It is a device for charging new energy electric vehicles, specifically designed to provide AC and DC power to electric vehicles equipped with an onboard charger (handshake battery BMS management system). Resembling a sturdy pillar, it is referred to as a charging pile. 2. Function: The charging pile functions similarly to a fuel dispenser in a gas station. It can be fixed on the ground or walls and installed in public buildings (such as public buildings, shopping malls, public parking lots, etc.) and residential community parking lots or charging stations. It can charge various types of electric vehicles according to different voltage levels. The input end of the charging pile is directly connected to the AC grid, and the output end is equipped with a charging plug for charging electric vehicles. The charging pile can achieve timed charging, electricity metering, and cost calculation, serving as a terminal for citizens to purchase electricity. At the same time, it improves the efficiency and practicality of public charging piles.
17
1
Share

Does Insurance Cover Spontaneous Combustion of Electric Vehicles?

If the vehicle is covered by spontaneous combustion insurance and has not undergone any modifications, you can file a claim with the insurance company. Here are the specific details: 1. Extent of Damage: The insurance company will provide compensation based on the extent of the vehicle's damage. It is important to remind consumers that even if spontaneous combustion insurance is purchased, you must report the fire to the police in case of an electric vehicle fire. The insurance company requires a fire department report as proof for the claim. 2. Usage of Electric Vehicles: Always operate the electric vehicle according to standard procedures. Avoid modifying the wiring or installing high-power accessories in the car to prevent spontaneous combustion incidents. 3. Product Quality: If a new energy vehicle spontaneously combusts during the warranty period and the owner has not modified or added any wiring to the vehicle, the owner should contact the manufacturer and explain that the spontaneous combustion was caused by the vehicle's inherent quality issues.
10
5
Share

What is the typical fuel tank capacity of a car?

Generally, small cars have a fuel tank capacity of 35-45 liters, while medium-sized cars have a capacity of 55-75 liters. A full tank typically allows for a driving range of approximately 500 kilometers. The size of the fuel tank correlates with the vehicle's displacement: larger displacement engines with higher fuel consumption have bigger tanks, while smaller displacement engines with lower consumption have smaller tanks. During actual refueling, the amount of fuel may exceed the marked capacity. This is because the capacity specified by car manufacturers is measured from the bottom of the tank to the safe fill level. There is additional space from the safe fill level to the tank opening, designed to accommodate fuel expansion due to temperature increases without causing overflow. If fuel is filled up to the tank opening during refueling, the actual amount of fuel added may exceed the marked tank capacity. To check the remaining fuel level, drivers can observe the fuel gauge on the right side of the instrument panel, marked with 'E' (Empty) and 'F' (Full). When the needle is near 'E', it indicates low fuel, while proximity to 'F' means the tank is sufficiently full.
13
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.