···
Log in / Register

What to Do If You Didn't Take a Card When Entering the Highway?

3 Answers
StLayla
09/03/25 5:30am
If you are still driving on the highway when the free period is about to end, you can choose to exit the highway at the nearest toll station. During the free period, small passenger vehicles can normally enjoy the free passage policy whether they enter or exit the highway through manual lanes or ETC lanes.
Was this review help?
2
1
Share
HaileyLee
09/15/25 7:01am
I once forgot to take the toll card when entering the highway—I was still new to driving back then and panicked. At the exit, the toll collector asked where my card was. I honestly admitted forgetting to take it at the entrance, so he had me name the entry point and charged me a bit extra based on the starting station. Thankfully, nothing major happened, but now I always check the dashboard to ensure I’ve taken the card before entering. My advice: if you encounter a similar situation, don’t stay silent—explain proactively. The toll officer can verify the system and handle it, avoiding suspicions of fare evasion or fines. Highway rules are strict, and taking the card at the entrance is crucial. Developing good habits prevents trouble. Safe driving leaves no room for oversight—these small details matter, affecting both your mood and trip. In short, honesty and cooperation beat stubborn resistance any day.
Was this review help?
1
1
Share
Expand All
StDamian
10/29/25 7:40am
If you didn't take a toll card at the highway entrance, just tell the toll collector the truth at the exit. They will usually ask for entry information or calculate the fee using system records. The charge might be slightly higher in this case, but it's more convenient. I recommend developing the habit of taking a card in advance and staying focused at the entrance to avoid distractions. Handling it afterward is simple: cooperate with the toll collector by providing the entry time and location, and they can complete the process by entering it into the system. Don't try to cheat; if caught without a card, it could involve legal risks and more trouble. The highway toll system is now networked, so honesty is the best policy. The more driving experience you have, the more you understand that prevention is better than cure. This mistake is fixable, so stay relaxed and drive safely.
Was this review help?
7
5
Share
Expand All
More Forum Discussions

What Causes the BMW 5 Series Low Beam Failure?

BMW 5 Series low beam failure may be caused by circuit faults, power inconsistency, reflector deformation, poor sealing, or relay abnormalities. Circuit Faults: Poor or loose wiring connections. Power Inconsistency: This issue can occur when replaced bulbs have mismatched power ratings. Reflector Deformation: Deformed, loose, or poor-quality reflectors inside the headlight can cause poor light concentration or dispersion, resulting in insufficient brightness or unfocused beams. Poor Sealing: Water ingress, foreign objects, or dust due to inadequate headlight sealing can obstruct the light, leading to dim or weak illumination. Relay Abnormalities: Malfunctioning lighting circuit control relays may cause weak or non-functional lights.
18
0
Share

Will BMW's fuel consumption increase after enabling hidden features?

BMW's fuel consumption will increase after enabling hidden features. Other factors affecting fuel consumption: The fuel consumption of a car is not only related to the car itself, but also closely related to the driving conditions and the driver's habits. If driving on congested roads, the car often needs to stop and go. Starting from a standstill requires significant kinetic energy, and the engine needs to output a large amount of power at this time. Methods to improve fuel economy: If you want to improve fuel economy, the first thing to do is to change your driving habits. When driving, try to maintain a constant speed and avoid unnecessary overtaking.
16
5
Share

Is BMW's Chassis Technology Citroën's?

BMW's chassis technology is Citroën's chassis technology. Introduction to automobile chassis: The function of the chassis is to support and install the automobile engine and its various components and assemblies, form the overall shape of the automobile, receive the power from the engine, enable the automobile to move, and ensure normal driving. It consists of four parts: the transmission system, the running system, the steering system, and the braking system. Maintenance of automobile chassis: Regularly check the condition of the automobile tires, first checking the tire pressure to ensure it is always within the normal range. Periodically clean and wipe the automobile chassis, inspect the operation of various parts of the vehicle chassis, and check and maintain the automobile shock absorbers. The automobile shock absorbers are also installed in the automobile chassis and require daily maintenance. The working condition of the shock absorbers affects the smoothness of the automobile during driving. If the shock absorbers are in good working condition, it can directly affect the service life of other components of the automobile, thereby increasing the economic efficiency of automobile use.
15
3
Share

Where is the oil filter located on the Mercedes-Benz E260?

The oil filter of the Mercedes-Benz E260 is located on the right side near the front windshield, and it can be lifted with a 26-size wrench. Oil filter replacement cycle: The car oil filter should be replaced every 5,000 kilometers or every six months, whichever comes first. The oil filter must be replaced when changing the engine oil. The replacement cycle for motorcycle oil filters is usually 4,000-6,000 kilometers, and the specific replacement cycle should be determined according to the vehicle's manual. Function of the oil filter: The oil filter is used to remove impurities such as dust, metal particles, carbon deposits, and soot particles from the engine oil to protect the engine. During engine operation, metal shavings, dust, oxidized carbon deposits and colloidal deposits at high temperatures, water, etc., are continuously mixed into the lubricating oil.
14
0
Share

Does Chery have any four-wheel drive vehicles?

Chery does not offer four-wheel drive configurations; all models are front-engine, front-wheel drive. Advantages of front-engine, front-wheel drive: Eliminates the need for a driveshaft, reducing vehicle weight. The structure is more compact, effectively utilizing engine compartment space. The cabin space is more spacious, helping to lower the floor height and improve passenger comfort. The engine is closer to the drive wheels, resulting in higher power transmission efficiency and better fuel economy. The engine and other components are front-mounted, increasing the load on the front axle, which enhances high-speed driving stability and directional stability during braking. Disadvantages of front-engine, front-wheel drive: Reduced front-wheel load during startup, acceleration, or climbing, leading to decreased traction. The front axle serves as both the steering and drive axle, making the structure and manufacturing process more complex, increasing production costs, and making maintenance more difficult. The front axle bears a heavier load than the rear axle, and since the front wheels are also steering wheels, they operate under harsh conditions, resulting in shorter tire lifespan. Front-wheel drive and steering require constant-velocity universal joints, which involve complex mechanisms and manufacturing processes. In the event of a frontal collision, the engine and related components are more likely to sustain significant damage, leading to higher repair costs.
4
2
Share

What is the fuel consumption of the Haval 2.5T diesel?

Haval 2.5T diesel fuel consumption is 8 liters - 9 liters per 100 kilometers. Introduction to fuel consumption per 100 kilometers: It refers to the amount of fuel consumed by a vehicle traveling 100 kilometers, abbreviated as fuel consumption per 100 kilometers. It is used to measure the fuel economy of a vehicle and can vary under different conditions. Precautions for vehicle fuel consumption: Clutch slippage can cause the engine to lose speed. If you notice that the engine speed increases rapidly during hard acceleration but the vehicle speed increases slowly, this may indicate clutch slippage. In this case, the clutch plate, clutch pressure plate, and drive wheel need to be replaced. Overloading the vehicle: Some drivers use the trunk as a storage space, filling it with unnecessary items, which increases the vehicle's weight. It is important to note that vehicle weight is directly proportional to fuel consumption. It is said that for every 10% reduction in vehicle weight, fuel consumption will decrease by a certain percentage.
2
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.