···
Log in / Register

What tires does the Roewe 360 use?

1Answers
DelLandon
07/23/2025, 08:14:14 PM

Roewe 360 uses MAXXIS tires with a tire specification of 205/55R16. MAXXIS tires focus on durability, wet road performance, and low noise. The tires on the Roewe 360 are circular elastic rubber products assembled on various vehicles or machinery to roll on the ground. They are usually mounted on metal rims, supporting the vehicle body, cushioning external impacts, ensuring contact with the road surface, and maintaining the vehicle's driving performance. The most important parameter of a car's tires is the tire pressure value. The car's tire pressure monitoring system provides safe and effective protection for driving. Tire pressure may rise or fall depending on temperature and region, so it's necessary to determine whether the car's tire pressure is within the normal range based on current conditions. The tire pressure range varies depending on the tire model and size, so it should be decided based on actual conditions. Generally, a tire pressure above 2.8 bar is considered too high, while a tire pressure below 2.0 bar is too low. Hazards of excessive tire pressure: Reduced tire friction and adhesion, affecting braking performance; causes steering wheel vibration and deviation, reducing driving comfort; accelerates wear on the central tread pattern, shortening tire lifespan; increases vehicle vibration, indirectly affecting the lifespan of other components; overextends the tire cords, reducing elasticity and increasing the load on the vehicle during driving. Hazards of insufficient tire pressure: Increases friction coefficient with the road surface, raising fuel consumption; makes the steering wheel heavy and prone to deviation, compromising driving safety; increases movement in various parts of the tire, causing abnormal heat due to excessive rolling; reduces the functionality of cords and rubber, leading to delamination or cord breakage and excessive friction with the rim, damaging the bead area and causing abnormal wear; multiplies friction with the ground, sharply raising tire temperature, softening the tire, and drastically reducing strength. High-speed driving may lead to tire blowouts.

Was this review help?
110
Share
More Q&A

How to Play Music from a USB Drive in a BMW 3 Series?

The car charger is equipped with different output ports labeled For iPod/Others, allowing you to choose the appropriate port for charging different devices. Insert the USB car charger plug into the car's cigarette lighter. At this point, the LED will light up with a red glow. Connect the USB end to the output port of the car charger, then plug the corresponding connector into your device for power supply or charging. Once the device is fully charged, please remove the charger from the car's cigarette lighter.
120
Share

How to Reset the Maintenance Light on a 2015 Highlander?

Find and hold the "A" button while also pressing the brake pedal. Turn the ignition switch to "on" but do not start the car immediately. Keep holding the "A" button, and after a moment, you will see "..." appear on the dashboard. Release the brake pedal and the "A" button. Turn off the vehicle's power to complete the maintenance light reset. Sometimes, you may need to press and release the button several times to clear the maintenance light.
115
Share

How long after a failed driving test appointment can you reschedule?

If your driving test appointment fails, you can normally reschedule the next day. The reasons for a failed driving test appointment may include the following: 1. Not meeting the time limit requirements set by the authorities. 2. The number of applicants for a single test center is too high; when the number of applicants for a single test exceeds the planned capacity of the test center, applicants ranked lower will fail to secure an appointment. 3. Applying for too many test sessions. A candidate can apply for tests at up to five test centers simultaneously, but only one appointment can be successful, and the other four will be marked as failed.
112
Share

How often should Castrol EDGE 5W30 be changed?

Castrol EDGE 5W30 is a fully synthetic engine oil that can be changed every 10,000 kilometers or once a year. Its characteristic is that it degrades relatively slowly, so the replacement cycle is comparatively longer. Steps for changing engine oil: When the car engine temperature is in a normal state, lift the vehicle with a jack. Place a container under the oil pan in the car's chassis, then loosen the oil drain plug to allow the oil to flow out naturally. Once the oil has completely drained, reinstall the drain plug. Move the oil container under the oil filter, remove the filter element with a wrench, and let the oil inside flow out naturally. After the oil has completely drained, install a new filter element. After installing the filter element, place the car on level ground and add new oil. It is best to use the manufacturer's recommended oil that meets the standards. After adding the new oil, start the vehicle to check the oil condition. If any issues arise, perform maintenance promptly. Performance characteristics of Castrol EDGE: Extends the life of today's high-performance engines, with strong high-temperature control capabilities and excellent performance. Castrol EDGE is specially formulated to enhance the oil's oxidation stability and reduce oil degradation under high temperatures, making it more suitable for the demanding operating environments of modern high-performance engines.
118
Share

What are the steps for handling a breakdown on the highway?

Immediately turn on the hazard warning lights and drive the vehicle into the emergency stopping lane or onto the right shoulder. After safely parking the vehicle, the driver and passengers should exit the vehicle from the doors on the side away from traffic as quickly as possible and move to the right shoulder or emergency lane. In addition to turning on the hazard warning lights, place the breakdown warning sign 150 meters in the direction of oncoming traffic and call for help immediately.
106
Share

How to Turn On the Air Conditioning in GAC Toyota?

Press the A/C button to turn on the air conditioning. Turn the right knob to the cold setting for cooling, and adjust the left knob to control the fan speed. Start the engine and press the A/C button. Since the water temperature hasn't risen yet, the system will rely on electric heating to warm the air. After driving for a while and the vehicle's water temperature increases, there's no need to press the A/C button; the car's waste heat can be used to warm the air.
108
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.