The simplest and most accurate method for parallel parking on both sides is introduced as follows: Identify the starting point: Taking right-side parking as an example, the car should be positioned 1.2-1.8 meters away from the left line at the starting point, with the steering wheel straight and the car body parallel to the left line. When reversing, use the lower edge of the left rearview mirror as a reference. When the two coincide, turn the steering wheel fully to the right and continue reversing. Control the corner point: Watch the right rearview mirror. When you spot the corner of the parking space, observe the distance between the corner and the car body. If the distance is less than 30 cm, turn the steering wheel back half a turn and continue reversing. Once the car body enters the parking space and aligns parallel with the parking lines, turn the wheel back one full turn. If the distance is not less than 30 cm, do not turn the wheel back; keep reversing until the car body is parallel with the parking lines, then turn the wheel back one and a half turns at once. Align the stopping point: The stopping point is where you stop after entering the parking space. The reference method is the same as for the starting point. When you see the lower edge of the left mirror coincide with the shoulder line of the parking space, stop the car. Precautions for the Subject 2 driving test: Before starting, clean both rearview mirrors and the window frames from outside the car. Adjust the rearview mirrors and seat properly and secure them. Always remember to fasten your seatbelt. When taking the parallel parking test, choose the parking space at the very back if possible. You can stop and wait before entering the parking space. Once inside, there will be a broadcast in the car announcing, "Parallel parking test begins."
