···
Log in / Register

What is the ground clearance of the 2021 Lavida?

3 Answers
KayleeMarie
09/05/25 6:01am
The ground clearance of the 2021 Lavida is 110mm. The minimum ground clearance refers to the distance between the lowest point of the car (excluding the wheels) and the supporting plane when the car is fully loaded or stationary. It is used to characterize the car's ability to pass over obstacles such as rocks and stumps without collision. Taking the 2021 Volkswagen Lavida as an example, it belongs to the compact car category, with body dimensions of: length 4670mm, width 1806mm, height 1474mm, and a wheelbase of 2688mm. The 2021 Volkswagen Lavida features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 1.4T turbocharged engine, delivering a maximum horsepower of 150PS, a maximum torque of 250Nm, and a maximum power of 110kW, paired with a 7-speed dual-clutch transmission.
Was this review help?
10
2
Share
ORafael
09/17/25 6:24am
I've been driving the 2021 Lavida for over two years now, with a ground clearance of around 145mm. This height feels quite comfortable for city driving, as it doesn't bounce harshly over speed bumps. However, on rural roads, I need to be more cautious since it's lower than SUVs and prone to scraping the undercarriage on potholes, so I always slow down on dirt roads. The Lavida's chassis is designed for stability and fuel efficiency, making turns smooth during regular driving, but it feels a bit low on steep slopes—it's best to gauge the angle beforehand and avoid charging up too quickly. I've also installed underbody protection to avoid costly repairs from scrapes. Overall, the fuel consumption is low, averaging around 6L/100km. The slightly lower clearance is a fair trade-off for easy handling, making it suitable for family use. Don’t forget to check tire pressure during regular maintenance to ensure balanced performance.
Was this review help?
12
0
Share
Expand All
SawyerMarie
10/31/25 6:53am
As an enthusiast who enjoys delving into automotive details, I recall that the 21st-generation Lavida typically has a ground clearance ranging from 130 to 150 mm, with my actual measurements averaging around 140mm—a balanced height for a sedan. A slightly lower clearance enhances handling stability but sacrifices some off-road capability compared to SUVs. During the design phase, engineers optimized the suspension system, which effectively filters out road vibrations and ensures a smooth ride over urban manhole covers. On gravel roads, it's essential to control your speed and avoid deep potholes to prevent potential undercarriage damage. Compared to competitors like the Toyota Corolla (130mm), the Lavida offers slightly higher clearance, making it more suitable for mixed road conditions. Before driving, I recommend visually assessing ground obstacles and adapting your driving habits accordingly to prolong the vehicle's lifespan. Ground clearance also impacts fuel efficiency—its relatively lower height was one of the key reasons I chose the Lavida for better fuel economy.
Was this review help?
3
5
Share
Expand All
More Forum Discussions

What Causes the Car Not to Start and the Brake Pedal to Be Hard to Press?

The reasons why the car won't start and the brake pedal is hard to press are: 1. The owner stepped on the brake several times after turning off the engine, causing the vacuum in the brake booster pump to disappear; 2. The booster pump is not working when the engine is off. In this case, try to restart the engine and press the brake pedal firmly. After starting, it should return to normal. If the above methods fail to restore normal operation, find a nearby repair shop to clear the fault before continuing to drive. When driving at low speed and encountering an emergency ahead, you can perform emergency braking by stepping on the brake pedal firmly. However, this should not be done at high speeds to avoid vehicle skidding or rollover.
19
2
Share

What is the penalty for driving at 65 km/h in a 50 km/h urban speed limit zone?

Driving at 65 km/h in a 50 km/h urban speed limit zone will result in a fine and 6 demerit points. Motor vehicles must not exceed the speed indicated by traffic signs or markings on the road. Demerit point standards for speeding violations: Speeding within 10% of the speed limit: Warning issued. Fine and 3 demerit points: Speeding between 10%-20% above the limit: Fine and 3 demerit points. Fine and 6 demerit points: Speeding between 20%-50% above the limit: Fine and 6 demerit points. Speeding over 50% above limit: Exceeding speed limit by more than 50% may result in license suspension and fine. Demerit point standards for wrong-way driving: 12 demerit points for any of the following violations: Reversing, driving against traffic flow, or making U-turns across median dividers on expressways. 3 demerit points for any of the following violations: Improper overtaking, failure to yield, or driving against traffic flow. Penalties for wrong-way driving under Article 90 of the Road Traffic Safety Law: Warnings or fines for violating road traffic regulations.
7
1
Share

Can Pearl White Car Paint Be Repaired Without Color Difference?

Pearl white car paint cannot be repaired without color difference. Because pearl white is a metallic paint, the paint quality is relatively good, and later touch-ups are prone to color differences. Reasons why pearl white paint cannot be repaired without color difference: The process of touch-up paint is different from the original factory paint. In fact, for pearl white car paint, local touch-ups can be done, and since the proportion of raw materials used is fixed, color matching is relatively easier. However, whether the color difference after touch-up is obvious depends on the color matching skills and painting techniques of the repair technician. Precautions for car painting: Choose a good auto repair shop: When performing body shaping and painting for your car, choose an auto repair shop with a good reputation and skilled technicians. It doesn’t necessarily have to be a 4S shop; some experienced repair technicians’ own shops are also good. Negotiate the price in advance: If you are not repairing the car at a 4S shop, negotiate the price in advance when going elsewhere for body shaping and painting to avoid various disputes after the repair. Ensure proper shaping: Car body shaping is crucial. Poor shaping can make the car surface look uneven, greatly affecting its appearance. When the repair technician is shaping, watch closely to ensure the shaping is smooth and even.
1
4
Share

Where is the first aid kit located in the Buick Verano?

The Buick Verano does not come with a first aid kit. If owners wish to have one, they need to purchase it separately and place it in the trunk. Typically, first aid kits are equipped in luxury models and serve the primary purpose of quickly stopping bleeding. If a car is equipped with a first aid kit, it is important to replace it periodically. The Buick Verano is a compact sedan under the Buick brand, with dimensions of 4723mm in length, 1802mm in width, and 1466mm in height, and a wheelbase of 2700mm. The car features a 4-door, 5-seat sedan body style, a 6-speed automatic transmission, front-wheel drive, and is powered by two engine options: a 1.0L turbocharged engine and a 1.3L turbocharged engine.
16
4
Share

What to Do When the Car Pulls to One Side?

The solution to a car pulling to one side is to perform a four-wheel alignment. During driving, the car may inevitably experience impacts, which can cause deviations in the wheel alignment after the tires are hit. The supporting components of the car's chassis may also undergo slight deformation due to bumps or vibrations. The four-wheel alignment primarily adjusts the relative position between the wheels and the chassis. For the front wheels, this includes caster angle, kingpin inclination, camber, and toe; for the rear wheels, it includes camber and toe. Situations that require a four-wheel alignment include: 1. The vehicle's driving performance is affected; 2. Damage to the chassis and suspension due to an accident; 3. Abnormal tire wear; 4. Components of the axle or suspension have been removed.
3
0
Share

What Are the Reasons for Strong Exhaust Smell Inside the Car?

There are several main reasons for a strong exhaust smell inside the car: 1. The car hasn't warmed up yet, and the smell will dissipate after warming up; 2. Incomplete combustion due to improper air-fuel mixture; 3. Carbon buildup or erosion on the spark plugs; 4. Leakage in the ignition wires; 5. Malfunctioning oxygen sensor, insufficient intake system pressure, or inadequate air intake. Methods to address the strong exhaust smell inside the car: 1. First, clean the carbon deposits. If the smell persists after cleaning, the vehicle should be inspected and repaired; 2. Open the car doors to eliminate odors inside the car. Regularly open the windows and doors to facilitate air exchange between the interior and exterior, allowing harmful gases inside the car to evaporate as quickly as possible.
13
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.