···
Log in / Register

What is the fuel tank capacity of the Lincoln Corsair in liters?

3 Answers
StDominic
09/08/25 2:02am
The Lincoln Corsair, as a larger compact SUV, has an official fuel tank capacity of 62.2 liters, with a safe refueling capacity of approximately 60 liters in practice. Below is more relevant information: Fuel consumption test: The Lincoln Corsair's powertrain is equipped with a 2.0T turbocharged engine, which not only delivers robust performance but also boasts high fuel efficiency, resulting in relatively low fuel consumption. The official combined fuel consumption provided by the Ministry of Industry and Information Technology is 7.5-8L per 100 kilometers, while the actual measured average fuel consumption is 10.29L per 100 kilometers. Range: With the actual measured average fuel consumption of 10.29L per 100 kilometers and the formula (fuel tank capacity / actual fuel consumption) x 100km, the calculated average range is approximately 600 kilometers.
Was this review help?
1
1
Share
McIsaac
09/19/25 7:43am
The Lincoln Corsair has a fuel tank capacity of approximately 78 liters, which is quite practical for an SUV, especially for long-distance driving where a full tank can easily cover 600-700 kilometers. Personally, I find that a larger fuel tank reduces refueling frequency. On highways, the fuel consumption is about 9 liters per 100 kilometers, while in urban areas it's around 12 liters, making driving more worry-free. For new car owners, it's recommended to use 95-octane gasoline to better protect the engine. Additionally, the fuel tank is made with explosion-proof materials for enhanced safety, and it's important to regularly check the fuel cap seal to prevent leaks and potential issues.
Was this review help?
6
0
Share
Expand All
OGrace
11/02/25 8:05am
Speaking of the fuel tank capacity of the Lincoln Corsair, I estimate it to be 78 liters. It's particularly economical in daily use—filling up costs around six to seven hundred yuan but allows for a long driving range, making it very cost-effective for family trips. For example, taking the kids out for a week only requires refueling two or three times, without worrying about finding gas stations along the way. It's advisable to develop the habit of refueling before the low fuel light comes on to protect the fuel pump. In winter, the range might be slightly shorter, but overall, it's fuel-efficient and highly efficient.
Was this review help?
2
3
Share
Expand All
More Forum Discussions

What is a mid-size car?

Mid-size cars generally refer to a category of vehicles with a wheelbase of 2.8 to 3.0 meters, body length of 4.8 to 5.0 meters, engine displacement of 2.0 to 3.0 liters, and seating capacity of five. Below are relevant details:1. Parameter set 1: The emission standard for mid-size cars ranges from China 3 to Euro 4; the fuel standard requires unleaded gasoline of 93 octane or higher; main vehicle dimensions are length 4546~4880mm, width 1710~1886mm, height 1415~1510mm, and wheelbase 2548~2850mm.2. Parameter set 2: Mid-size car engine types include L4/L6/V6; displacement ranges from 1781~2997mL; maximum power output is 85/5400~177/6250kw; maximum torque is 172/3500~288/5000N.m; transmission types include MT5/AT4/AT6; tire types and specifications range from 195/65-R16 to 250/40-R17.
20
2
Share

What Are the Common Faults of Diesel Vehicle Electronic Throttle Pedals?

Common faults of diesel vehicle electronic throttle pedals are as follows: 1. Electronic throttle pedal position sensor: When the sensor fails, the ECU cannot detect the throttle position signal or obtain the correct position of the throttle pedal, resulting in symptoms such as weak engine acceleration or even the inability of the engine to accelerate. 2. Intake pressure sensor: As the name suggests, the intake pressure sensor detects a series of resistance and pressure changes corresponding to different engine speeds and loads, converting them into voltage signals for the ECU to adjust fuel injection volume and ignition timing angle. Typically installed near the throttle valve, a malfunction can lead to issues such as difficulty starting, unstable idle speed, and weak acceleration.
7
3
Share

Why Can't the Brakes Hold Well on Rainy Days?

Because roads are wet and slippery on rainy days, the tire adhesion decreases, and the braking effect is significantly weakened. Here are some relevant introductions: 1. Speed: When encountering water on the road, the speed should be reduced to 20~30 km/h. Reducing speed should mainly rely on the throttle and light braking, and sudden braking must be used with caution. Driving in the rain also requires ensuring that the air conditioning is in good condition, as rain can easily create fog on the windows, and the air conditioning is the most effective method to clear the fog. 2. Precautions: The biggest difficulty in driving in the rain is poor visibility. The low visibility on rainy days can affect the driver's reaction sensitivity. Additionally, driving too close to the vehicle in front can cause water spray from high-speed driving to blur the windshield, so a larger driving distance than usual should be maintained.
10
5
Share

Why is there a speed limit on the Toksun Gangu section?

In order to effectively improve road traffic safety management, strive to create a safe, orderly, and smooth road traffic environment, reduce road violations, and curb road traffic accidents. Here are the relevant details: 1. Announcement: From Kumishi Town to the Gangu section of Toksun County: G3012 line 112Km to 56Km, with a section length of 56 kilometers. The speed limit for small vehicles is 60Km/h, with a minimum passing time of 56 minutes, and for large vehicles, it's 40Km/h, with a minimum passing time of 84 minutes. Within the 56-kilometer section, there are 6 sub-sections with simultaneous section speed monitoring, and 6 radar fixed-point speed monitoring points. 2. Provincial Highway 301: S301 line 39Km to 98Km, with a section length of 59 kilometers, speed limit 80Km/h, minimum passing time 44 minutes and 15 seconds. Within the 59-kilometer section, there are 4 sub-sections with simultaneous section speed monitoring.
12
5
Share

Can I Take Subject Two Only After Passing Subject One?

After completing Subject One, you can start learning Subject Two projects according to the driving school's arrangement. The online registration for Subject Two can be made 10 days after passing Subject One. According to the "Regulations on the Application and Use of Motor Vehicle Driving Licenses," the registration requirement for Subject Two is to complete 26 study hours, including 2 hours of theoretical knowledge, 3 hours of simulated driving, and 21 hours of practical operation. For a C1 driver's license, you can register online for Subject Two 10 days after passing Subject One. Each registration for Subject Two grants two examination attempts. If the first attempt is unsuccessful, a free retake is allowed. If you do not take the retake or fail the retake, the examination ends, and you can re-register for Subject Two after 10 days. Within the validity period of the learning permit, the number of Subject Two examination registrations must not exceed five. If the fifth registration is still unsuccessful, the results of other passed subjects become invalid. To continue learning for the driving license, you need to re-register from Subject One. Subject Two examination content: completing driving tasks within a designated area; demonstrating proficiency in vehicle operation skills; assessing the ability to judge the vehicle's spatial position. Subject Two, also known as the small road test, includes five mandatory items: reversing into a parking space, parallel parking, stopping and starting on a slope, turning at a right angle, and driving through curves. Subject Two examination precautions: After getting into the car, always adjust the seat and rearview mirrors to a suitable position and state, and fasten the seat belt. For parallel parking, find the correct angle quickly, turn the steering wheel rapidly, react promptly, and coordinate with the vehicle's speed. When stopping on a slope, remember to engage the handbrake. When starting, always turn on the left turn signal, release the handbrake, stabilize the clutch, and gently press the accelerator while releasing the clutch to avoid stalling or rolling back. For turning at a right angle, quickly react to the turning point and coordinate with the vehicle's speed to prevent deviation. For driving through curves (S-curve), slow down. Those with good driving sense during practice can pass smoothly in one go. When reversing into a parking space, control the speed, identify reference points accurately, and make minor adjustments if there is any deviation observed in the rearview mirrors. There are three subjects in the driving test: Subject One, Subject Two, and Subject Three. Subject One refers to the examination on road traffic safety laws, regulations, and related knowledge. Subject Two refers to the examination on field driving skills. Subject Three is divided into two parts: road driving skills and safe and civilized driving common sense. The safe and civilized driving common sense test is conducted after Subject Three, so it is commonly referred to as Subject Four. However, in official terms (i.e., the Ministry of Public Security's Order No. 123), there is no such term as Subject Four.
3
3
Share

Where is the position light located?

Automotive position lights refer to the front and rear position lights on a vehicle, similar in size to clearance lights and width indicator lights. Here is some relevant information: 1. Function: When the position lights are on, they indicate the presence and approximate width of the vehicle, making it easier for other vehicles to judge during passing or overtaking. These lights, installed at the front of the vehicle, make the car more recognizable during daytime driving. In other words, these lights are not for illuminating the road for the driver but to alert others that a vehicle is approaching. 2. Precautions: Position lights should be turned on when the vehicle is turning to alert surrounding vehicles and pedestrians. The position light tubes use xenon lamps and are controlled by a single-chip microcomputer circuit, featuring alternating left-right flashing for continuous operation.
15
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.